[sane-devel] Hp 6300C on FreeBSD seg fault

Michael Collette metrol at metrol.net
Fri Sep 6 10:08:42 BST 2002


On Wednesday 04 September 2002 10:50 pm, Peter Kirchgessner wrote:
> Hi Michael,
>
> at least the scanner is working with USB under Linux. Even if the
> backend does not show the proper model.

I have a few more specifics on this that might be of some value to developers.  
Would be curious to know if any of this holds true for running under Linux.

I am able to utilize xscanimage without any core dumps.  I can preview in full 
color.  Unfortunately it's nearly unusable due to it being nearly 2 inches 
off target in the preview scan.  In other words, whatever area I hi-lite to 
do a full scan, I get an area about 2 inches below that.

XSane I've managed to work around to sort of usable.  If I do a half-tone 
preview I can then do a full scan in color.  Unlike xscanimage, the selected 
area appears to be right on target.  It's really hokey, but it's workable I 
suppose.

Lastly, of course, the core dumps in XSane if one attempts to do a full color 
or gray scale preview.

Are all these items specific to FreeBSD alone for this scanner?  Should I be 
passing this information along to the uscanner developers?  Is there anything 
else I should be looking to collect in the way of info?

> Michael Collette wrote:
> > Recently purchased this Hp 6300C to connect via USB to my laptop running
> > FreeBSD.  In the past I had really good luck with Sane on a FreeBSD
> > desktop with an older scanjet via a SCSI connection, so I thought I'd
> > give this a try.
> >
> > After a good bit of fighting with it, I finally managed to get Sane to
> > talk to it.  sane-find-scanner never does properly report the proper
> > model, but XSane appears to be utilizing the Hp backend when talking to
> > /dev/uscanner0.
> >
> > If I do a preview in "line art" mode, all is well.  I can changed the
> > mode to "Color" and do a full res scan from that point.  The thing that's
> > broken here is when I attempt a color preview.  When I do this, it scans
> > very nearly to the end of the document then promptly seg faults.
> >
> > In thinking this might be due to the scan attempting to go too far I
> > shortened the preview length to "letter".  No change, still seg faults.
> >
> > At this point I'm guessing that the problem might be somehow related to
> > the fact that Sane is unable to determine the exact model of the scanner
> > in use. I actually haven't a clue, but grasping at straws as best I can.
> >
> > Vital Stats:
> > 4.6-STABLE FreeBSD 4.6-STABLE #0: Sat Aug 31 03:01:09 PDT 2002
> >
> > Built from source from ports tree:
> > sane-backends-1.0.8
> > sane-frontends-1.0.8
> > xsane-0.87
> >
> > I really need to determine if this scanner is usable via the USB on
> > FreeBSD or not.  Limited time before I can take it back and get a refund
> > and all.  It really looks to be a nice scanner at a decent price, so I'd
> > really hate to take it back.
> >
> > Thanks,

-- 
"Outside of a dog, a book is man's best friend. Inside of a dog, it's too dark 
to read."
 - Groucho Marx



More information about the sane-devel mailing list