[sane-devel] HP7400 on usb

[Rene Rebe]

Hi.

thanks for all the info. Currenly the paid work and my study are
keeping be busy. I'll have a close look during the weekend ...

On: Thu, 10 Apr 2003 20:37:55 +0200 (CEST),
    Ondrej Koala Vacha <koala@fi.muni.cz> wrote:
> On Tue, 8 Apr 2003, Henning Meier-Geinitz wrote:
> =

> > Is the scanner listed in /proc/bus/usb/devices? If not, something w=
ith
> > your kernel USB system is wrong (wrong driver?).
> =

> Yes, it's:
> =

> # cat /proc/bus/usb/devices
> ..
> P:  Vendor=3D03f0 ProdID=3D0801 Rev=3D 0.01
> S:  Manufacturer=3Dhp
> S:  Product=3Dhp scanjet 7400c
> S:  SerialNumber=3DSCN227S0199LZ   =

> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D  2mA
> I:  If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 Dr=
iver=3D(none)
> E:  Ad=3D01(O) Atr=3D02(Bulk) MxPS=3D   8 Ivl=3D0ms
> E:  Ad=3D82(I) Atr=3D03(Int.) MxPS=3D   8 Ivl=3D10ms
> E:  Ad=3D83(I) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms
> T:  Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D02 Dev#=3D  3 Spd=3D1=
2  MxCh=3D 0
> D:  Ver=3D 1.10 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff MxPS=3D64 #Cfgs=3D=
  1
> ..
> =

> # mount
> ...
> none on /proc/bus/usb type usbdevfs (rw)
> =

> =

> > =

> > If yes, does sane-find-scanner find the scanner? =

> =

> No.
> =

> > If it's not found
> > even as root, you may not have libusb-0.1.6 or newer. When you buil=
d
> =

> I have installed libusb-0.1.7
> =

> > sane, configure prints a line like this "Libs=3D-lusb ...". If the =
-lusb
> =

> =

> Yes, I have LIBS=3D'-lusb -lnsl -lm  -ljpeg' in my config.log
> =

> =

> regards

- Ren=E9

--  =

Ren=E9 Rebe - Europe/Germany/Berlin
e-mail:   rene@rocklinux.org, rene.rebe@gmx.net
web:      http://www.rocklinux.org/people/rene http://gsmp.tfh-berlin.d=
e/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.