[sane-devel] CanoScan LIDE 20 on FreeBSD 5.1 Release
Marcus Schaffry
marcusschaffry@yahoo.de
Mon, 8 Dec 2003 17:05:52 +0100
Hi Gerhard,
Thank you for answering so fast.
Please inform me, when you have tested your CanoScan.
Bye,
Marcus
Am Montag, 8. Dezember 2003 16:53 schrieb Gerhard Jaeger:
> Hi,
>
> it seems, that this is a FreeBSD related problem, as the backend works fine
> on x86-Linux & libusb!
> A few days ago we also tried to make a CanoScan 660 work using FreeBSD and
> we had the same problems there. I'Ve installed FreeBSD 4.9 on my box now,
> but had not the chance to check it so far...
>
> Ciao,
> Gerhard
>
> On Monday 08 December 2003 16:28, Marcus Schaffry wrote:
> > Hi,
> >
> > on Friday I have bought a CanoScan Lide 20 and now I want to scan with
> > FreeBSD 5.1 Release, but it doesn't work.
> > First of all I've read all manpages and this mailingslist. But nobody
> > seems to have the same problem.
> >
> > So I will very happy, if someone will help me.
> >
> > Here is what I've done:
> >
> > - changed the file dll.conf: Now plustek is the only backens without a #
> > in front of it
> >
> > - the file plustek.conf only contains the following line:
> > [usb] 0x04A9 0x220D
> > device libusb:/dev/usb0:/dev/ugen0
> >
> > - compiled a new kernel with "device uscanner" ->>>> after a reboot
> > "/dev/ uscanner" was not in the directory /dev. And I decided to use
> > libusb so I compiled again a new kernel. This time without "device
> > uscanner".
> >
> > - "sane-find-scanner" output:
> > found USB scanner (vendor=0x04a9, product=0x220d) at
> > libusb:/dev/usb0:/dev/ ugen0
> >
> > - changed the file "fstab"
> > Neither the line: "none /dev/ugen0 usbdevfs defaults 0 0"
> > nor the line: "none /dev/ugen0 usbfs defaults 0 0" works
> >
> > - "dmesg" output (only relaying on usb)
> > uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device
> > 17.2 on pci0
> > usb0: <VIA 83C572 USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > ugen0: Canon CanoScan, rev 1.10/1.00, addr 2
> >
> > - In the bash (root) I did the following:
> > "export SANE_DEBUG_SANEI_USB=255"
> > "export SANE_DEBUG_PLUSTEK=255"
> > "export SANE_DEBUG_DLL=255"
> > "scanimage -L" Output:
> > [sanei_debug] Setting debug level of dll to 255.
> > [dll] sane_init: SANE dll backend version 1.0.10 from sane-backends
> > 1.0.13 [dll] sane_init: reading dll.conf
> > [dll] add_backend: adding backend `plustek'
> > [dll] sane_get_devices
> > [dll] load: searching backend `plustek' in `/usr/local/lib/sane'
> > [dll] load: trying to load `/usr/local/lib/sane/libsane-plustek.so.1'
> > [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1'
> > [dll] init: initializing backend `plustek'
> > [sanei_debug] Setting debug level of plustek to 255.
> > [sanei_debug] Setting debug level of sanei_usb to 255.
> > usb_set_debug: Setting debugging level to 255 (on)
> > usb_os_find_busses: Found /dev/usb0
> > usb_os_find_devices: Found /dev/ugen0 on /dev/usb0
> > usb_control_msg: 128 6 512 0 0xbfbfe330 8 1000
> > usb_control_msg: 128 6 512 0 0x8054080 39 1000
> > [sanei_usb] sanei_usb_init: found libusb device (0x04a9/0x220d) interface
> > 0 at libusb:/dev/usb0:/dev/ugen0
> > [sanei_usb] sanei_usb_init: found 1 devices
> > [plustek] Plustek backend V0.46-9, part of sane-backends 1.0.13
> > [plustek] >[usb] 0x04A9 0x220D<
> > [plustek] section contains no device name, ignored!
> > [plustek] next device is a USB device (0x04A9-0x220D)
> > [plustek] ... next device
> > [plustek] >device libusb:/dev/usb0:/dev/ugen0<
> > [plustek] Decoding device name >libusb:/dev/usb0:/dev/ugen0<
> > [plustek] attach (libusb:/dev/usb0:/dev/ugen0, 0xbfbfe8d0, 0x0)
> > [plustek] Device configuration:
> > [plustek] device name : >libusb:/dev/usb0:/dev/ugen0<
> > [plustek] USB-ID : >0x04A9-0x220D<
> > [plustek] warmup : -1s
> > [plustek] lampOff : -1
> > [plustek] lampOffOnEnd : yes
> > [plustek] cacheCalData : no
> > [plustek] altCalibrate : no
> > [plustek] skipCalibr. : no
> > [plustek] skipFine : no
> > [plustek] skipFineWhite: no
> > [plustek] invertNegs. : no
> > [plustek] pos_x : 0
> > [plustek] pos_y : 0
> > [plustek] pos_shading_y: -1
> > [plustek] neg_x : 0
> > [plustek] neg_y : 0
> > [plustek] neg_shading_y: -1
> > [plustek] tpa_x : 0
> > [plustek] tpa_y : 0
> > [plustek] tpa_shading_y: -1
> > [plustek] red gain : -1
> > [plustek] green gain : -1
> > [plustek] blue gain : -1
> > [plustek] red Gamma : 1.00
> > [plustek] green Gamma : 1.00
> > [plustek] blue Gamma : 1.00
> > [plustek] gray Gamma : 1.00
> > [plustek] ---------------------
> > [plustek] drvopen()
> > [plustek] usbDev_open(libusb:/dev/usb0:/dev/ugen0,0x04A9-0x220D)
> > [sanei_usb] sanei_usb_open: trying to open device `libusb:/dev/usb0:/dev/
> > ugen0'
> > [sanei_usb] sanei_usb_open: found interupt-in endpoint (address 1)
> > [sanei_usb] sanei_usb_open: found bulk-in endpoint (address 2)
> > [sanei_usb] sanei_usb_open: found bulk-out endpoint (address 3)
> > [sanei_usb] sanei_usb_open: opened usb device `libusb:/dev/usb0:/dev/
> > ugen0' (*dn=0)
> > [sanei_usb] sanei_usb_get_vendor_product: device 0: vendorID: 0x04a9,
> > productID: 0x220d
> > [plustek] Vendor ID=0x04A9, Product ID=0x220D
> > [plustek] usbio_DetectLM983x
> > [sanei_usb] sanei_usb_write_bulk: trying to write 4 bytes
> > [sanei_usb] 0000: 01 69 00
> > 01 .i..............
> > [sanei_usb] sanei_usb_write_bulk: wanted 4 bytes, wrote 4 bytes
> > [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> > USB error: error reading from bulk endpoint /dev/ugen0.2: Operation timed
> > out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out
> > USB error: usb_clear_halt called, unimplemented on BSD
> > [plustek] UIO error
> > [plustek] This is not a LM9831 or LM9832 chip based scanner.
> > [sanei_usb] sanei_usb_close: closing device 0
> > usb_os_close: closing endpoint 6
> > usb_os_close: closing endpoint 5
> > [plustek] open failed: -1
> > [dll] init: backend `plustek' is version 1.0.0
> > [plustek] sane_get_devices (0xbfbff1d8, 0)
> > [dll] sane_get_devices: found 0 devices
> >
> > No scanners were identified. If you were expecting something different,
> > check that the scanner is plugged in, turned on and detected by the
> > sane-find-scanner tool (if appropriate). Please read the documentation
> > which came with this software (README, FAQ, manpages).
> > [dll] sane_exit: exiting
> > [dll] sane_exit: calling backend `plustek's exit function
> > [plustek] sane_exit
> > [dll] sane_exit: finished
> >
> >
> > So that's all.
> > Marcus