[sane-devel] Linux 2.5.62

[Stian Jordet]

Hello,

I have lately been using kernel 2.5.x on my computer. Because of several
reasons I like that better. But, I cannot seem to get the scanner to
work. It works fine with 2.4.x. It's a Epson Perfection 1260, and I have
tried both the Epson Kowa backend and the plustek backend (which both
works fine in 2.4.x). When using SANE_DEBUG_EPSON=255 I get that it
can't open the device. But when loading the scanner module, it seems to
find my scanner. And, as I said, the exact same setup works with 2.4.x,
and my usb-printer works with 2.5.x. So my question is, are there any
known issues with scanning with 2.5.x kernels?

Best regards,
Stian Jordet


[epson] sane_init, >usb /dev/usb/scanner0<
[epson] attach(usb /dev/usb/scanner0)
[epson] SANE Epson Backend v1.4.0ek - 2002-7-22
[epson] attach(usb /dev/usb/scanner0)
[epson] attach: opening usb /dev/usb/scanner0
[epson] sane_start: /dev/usb/scanner0 open (USB) failed: No such device
[epson] sane_get_devices()

[plustek] gray Gamma   : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usb/scanner0,)
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfffe868, 0)
[plustek] sane_exit

>From my dmesg:
drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x011d) now
attached to scanner1