[sane-devel] Problem in setting up Xsane

Stephen Liu satimis@icare.com.hk
Thu, 27 Feb 2003 00:26:35 +0800


Hi Henning,

Further to my late posting.  Sorry for mis-typing your name

B.Regards
Stephen

Henning Meier-Geinitz wrote:
> Hi,
> 
> On Wed, Feb 26, 2003 at 06:38:59PM +0800, Stephen Liu wrote:
> 
>>>Yes but there should be the scanner as well! This is the machine where
>>>the scanner is attached or? Have you got /dev/sg0 .. sg7?
>>
>>$ su
>>Password:
>># locate sg0
>>/dev/sg0
> 
> 
> Ok. Please tell us more about your system:
> 
> - Which SCSI card is used for your scanner?
> - Is the SCSI driver for this card loaded?
> - Is your SCSI cdrom connected to the same SCSI card or a different one?
> 
> Your problem is not related to xsane (that's "just" the graphical
> application, the scanner access is done in the SANE backends).
> It's a problem of your kernel or hardware. First make sure that your
> scanner is detected in /proc/scsi/scsi, then you can go on with
> sane-find-scanner, scanimage and xsane.
> 
> 
>>>There is a net.conf in C:\sane\etc\sane.d or corresponding path in
>>>linux, you should write here the ip-number of the machine where the
>>>scanner is attached.
>>
>>
>># locate net.conf
>>/etc/sane.d/net.conf
> 
> 
> Ignore net.conf. At least if you don't want to use SANE over the
> network, you don't need it.
> 
> Bye,
>   Henning
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>