[sane-devel] lost with FUJITSU scanner M3096G

[Oliver Schirrmeister]

Am Sam, 2003-03-08 um 23.15 schrieb Frank Zago:
> 
> > 
> > I've tried it with RedHat 8.0 linux. The sense bytes 16 and 17 really
> > point to the offending byte (I've tried to set a invalid resolution 
> > an others). There is a 8 byte window header you can't 
> > see in the hexdump above. The offending byte is at position 25 (0x02).
> > This means 'grayscale monochrome'. Dirks M3096G doesn't seem to support
> > grayscale (probably that firmware bug?).
> > 
> > 
> 
> Or it support grayscale, but not with a 8 bits depth. What about 4? See 
> set_WD_bitsperpixel in setWindowParam().
> 
> Frank
> 

According to the M3096GX OEM manual the M3096 only supports 8 and 1 bit.
Setting 'bits per pixel' to 4 returns an error (M3097 and M4097).

Oliver