[sane-devel] scanimage cannot find coolscan2

Kenneth Lee kennethtwlee@yahoo.com.hk
Fri, 10 Oct 2003 15:40:54 +0800 (CST)


Hi Andras,


Most sorry for causing you inconvenience.


the result of SANE_DEBUG_COOLSCAN2=255 scanimage -L as
follows

sanei_debug] Setting debug level of coolscan2 to 255.
[coolscan2] sane_init() called.
[coolscan2] coolscan2 backend, version 0.1.8
initializing.
[coolscan2] sane_get_devices() called.
[coolscan2] sane_get_devices(): Reading config file.
[coolscan2] cs2_open() called, with device = auto and
interface = 0
[coolscan2] sane_get_devices(): No devices detected.
[coolscan2] sane_exit() called.


No scanners were identified. If you were expecting
something different,
check that the scanner is plugged in, turned on and
detected by the
sane-find-scanner tool (if appropriate). Please read
the documentation
which came with this software (README, FAQ, manpages).




result from gscanbus as follows:

GUID: 0x0090B54001FFFFFF
Node Capabilities: 0x000083C0
Vendor ID: 0x000090B5
Unit Spec ID: 0x0000609E
Unit SW Version: 0x000010483
Model ID: 0x00004001
Nr. Textual Leafes: 1
Vendor: NIKON CORPORATION


Many thanks for your attention.
Kenneth Lee

_______________________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com.hk address at http://mail.english.yahoo.com.hk