[sane-devel] HP 3200c

[CARLOS EDUARDO DANTAS DE MENEZES]

Julien,

I read in some documentation that the correct seting of parport is EPP. =
I tested it with others options but also my scanner wasn't recognized =
(none error messages were appeared too).
How could I isolate the problem?

Thanks,

Menezes


-----Original Message-----
From:	Julien BLACHE [mailto:jb@jblache.org]
Sent:	Mon 10/27/2003 9:04 PM
To:	CARLOS EDUARDO DANTAS DE MENEZES
Cc:	sane-devel@lists.alioth.debian.org
Subject:	Re: [sane-devel] HP 3200c
"CARLOS EDUARDO DANTAS DE MENEZES" <carlos.edmenezes@sp.senac.br> wrote:

Hi,

> [umax_pp_low] Found 0xFF expected 0x00  (umax_pp_low.c:5002)

> [umax_pp_low] Found 0x11 expected 0x00  (umax_pp_low.c:5002)

> # dmesg | grep parport
> parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
> lp0: using parport0 (polling).
>
> Any sugestions?

Try changing the type of your parallel port in the BIOS to something
else than EPP (can't remember what the "normal" mode is... ECP
?). IIRC this is usually the cause of such messages.

JB.

--=20
Julien BLACHE                                   <http://www.jblache.org> =

<jb@jblache.org>=20