[sane-devel] Epson Perfection 1640SU with ADF or Filmadapter

cat52 cat52test@fastmail.fm
Mon, 23 Aug 2004 11:30:54 -0500


On 22/08/2004, at 19:10, Terje J. Hanssen wrote:

> Henning Meier-Geinitz wrote:
>
>>
>> On Wed, Aug 18, 2004 at 06:21:15PM +0200, Terje J. Hanssen wrote:
>>
>>>> I would just add that I am also able to run "xscanimage" after the 
>>>> sane
>>>> installation. But as far as have seen, the xscanimage is set up for
>>>> flatbed scanning only and with no selection for ADF.
>>
>>
>>

[..cut..]

>> 2) epson.conf:
>
> My /etc/sane.d/epson.conf file contains only one line that is not 
> commented out: scsi epson
>
> 3) scanimage:
>
> # scanimage -L
> device `epson:/dev/sg0' is a Epson Perfection1640 flatbed scanner
>
> # scanimage -d epson:/dev/sg0
> run flatbed scanning
>
> scanimage -h shows all options available. There is listed an option
> "--source flatbed|Automatic Document Feeder"
> I tried something like
>
> # scanimage -d epson:/dev/sg0  --source Automatic Document Feeder
> This syntax was obviously not correct. Can someone tell me how it 
> should
> looks like to scan from the ADF?
>
I use in an application and work OK (but using USB):

scanimage --batch="out%.4d.pnm" --batch-start=1 --mode Color 
--resolution 75 -t 5 -l 5 -x 125 -y 160 --source "Automatic Document 
Feeder"

> 3) xscanimage:
>
> # xscanimage -ANE
> didn't work. Is this the correct syntax to scan from the ADF?
>

[..cut..]

>
> Thanks,
> Terje J. Hanssen
>
>
> -- 
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request@lists.alioth.debian.org
>
>
Javier Diaz-Reinoso
Web: http://homepage.mac.com/javier_diaz_r/