[sane-devel] scanimage cannot see Umax Astra 2100S scanner.

[Oliver Rauch]

Am Freitag, 13. Februar 2004 13:01 schrieb Russ Pitman:
> abel deuring wrote:
> > Russ,
> > These nearly the comamnd I meant ;) But I'd like to see the _combined=
_
> > output from SANE_DEBUG_UMAX and SANE_DEBUG_SANEI_SCSI, so the command
> > would be:
> >
> > SANE_DEBUG_UMAX=3D255 SANE_DEBUG_SANEI_SCSI=3D255 scanimage -d
> > umax:/dev/scanner
>
> Okay fine.
>
> > SANE_DEBUG_UMAX=3D255 SANE_DEBUG_SANEI_SCSI=3D255 scanimage -d
> > umax:/dev/scanner 2> debug.txt
>
> Maybe someone else has an interest,and you are right. It isn't so big a=
fter
> all.

Hello Russ,

you removed almost all comments in the default umax.conf file (see attach=
ed=20
part of your log). This is really bad. Please use the original umax.conf=20
file, this should work.

Oliver

The relevant part of your logfile:

[sanei_scsi] sanei_scsi_open: open of `Options for the umax backend' fail=
ed:=20
No such file or directory
[umax] ERROR: attach_scanner: opening scsi device Options for the umax ba=
ckend=20
failed
[umax] option scsi-maxqueue =3D 2
[umax] option scsi-buffer-size-min =3D 65536
[umax] option scsi-buffer-size-max =3D 262144
[umax] option scan-lines =3D 100
[umax] option preview-lines =3D 20
[umax] option handle-bad-sense-error =3D 0
[umax] option execute-request-sense =3D 0
[umax] option force-preview-bit-rgb =3D 0
[umax] option slow-speed =3D 0
[umax] option care-about-smearing =3D 0
[umax] option calibration-full-ccd =3D 1
[umax] option calibration-width-offset =3D -99999
[umax] option calibration-bytes-pixel =3D -1
[umax] option exposure-time-rgb-bind =3D 0
[umax] option invert-shading-data =3D 0
[umax] option lamp-control-available =3D 0
[umax] option gamma-lsb-padded =3D 0
[umax] option connection-type =3D 1
[umax] attach_scanner: /dev/sg1, connection_type 1
[umax] attach_scanner: opening scsi device /dev/sg1

--=20
http://www.xsane.org
http://www.rauch-domain.de
http://www.sane-project.org