Fwd: [sane-devel] Problem with Epslon 1650 + Kernel 2.4.3: no lamp off

Karl Heinz Kremer khk@khk.net
Mon, 23 Feb 2004 19:32:34 -0500


Wrong key... this should have gone to the mailing list as well:

Begin forwarded message:

> From: Karl Heinz Kremer <khk@khk.net>
> Date: February 23, 2004 7:31:33 PM EST
> To: Martin Weinberg <mdweinberg@comcast.net>
> Subject: Re: [sane-devel] Problem with Epslon 1650 + Kernel 2.4.3: no 
> lamp off
>
> Does the status LED flash without Sane running?
>
> On Feb 23, 2004, at 8:52 AM, Martin Weinberg wrote:
>
>> Folks,
>>
>> I recently upgraded a Debian Sarge box from Linux 2.6.1 to 2.6.3.
>> Under 2.6.1, I used the scanner module. Since this is now deprecated
>> in 2.6.3, I configured libusb.
>>
>> No problems operating my Epson Perfection 1650, but now, using libusb,
>> the lamp never powers off!  I also notice that every few minutes, the
>> status light flashes, as it does when the unit is addressed.  It seems
>> as if the usb subsystem continues to "probe" the device.  Does anyone
>> have a clue how to deal with this?  For now, I simply unplug the 
>> device
>> from the bus and then the lamp powers off after its default period.
>>
>> --Martin
>>
>> -- 
>> sane-devel mailing list: sane-devel@lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>              to sane-devel-request@lists.alioth.debian.org
>