[sane-devel] please help w/Epson 636U and Panther
Fritz Lang
mtropicl@optonline.net
Sun, 04 Jul 2004 11:37:05 -0400
I have a G3 450Mhz running Panther.3.2 on OEM video card.
256M RAM
PCI USB 2 port and PCI FW 2 port cards.
Only the Epson 636U scanner is plugged in.
I powered the scanner on first, then plugged into the port.
There are no other apps running that scan, nor do I have any other
apps that scan. No daemons that I'm aware of.
Classic isn't running. I use to run it only to scan with Omnipage
Pro X, before I updated to Panther.
But it has not been run since.
Here's what I've tried.
Thanks,
Fritz
sane-find-scanner
found USB scanner (vendor=0x04b8 [EPSON], product=0x0101
[Perfection636]) at libusb:001:002-04b8-0101-ff-ff
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
scanimage > test.pnm
scanimage: no SANE devices found
scanimage -L
No scanners were identified.
scanimage -d test:0 > test.pnm
put a file "test.pnm" in my documents folder.
I ran the back-end debugger
setenv SANE_DEBUG_EPSON 255; setenv SANE_DEBUG_SANEI_USB 255;
scanimage > test.pnm
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 001
usb_os_find_devices: Found USB device at location 0x0f000000
usb_os_find_devices: Found 001-05ac-8005-09-00 on 001 at location 0x0f000000
usb_os_find_devices: Found USB device at location 0x0f200000
usb_os_find_devices: Found 002-04b8-0101-ff-ff on 001 at location 0x0f200000
usb_os_open: 04b8:0101
usb_os_open(USBDeviceOpenSeize): another process has device opened
for exclusive access
usb_control_msg: 128 6 512 0 0xbfffed48 8 1000
usb_control_msg: 128 6 512 0 0x301fa0 32 1000
usb_os_close: 04b8:0101
usb_os_open: 05ac:8005
usb_os_open(USBDeviceOpenSeize): another process has device opened
for exclusive access
usb_control_msg: 128 6 512 0 0xbfffed48 8 1000
usb_control_msg: 128 6 512 0 0x301c70 27 1000
usb_os_close: 05ac:8005
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0030
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0130
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0230
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2004
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a20
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a26
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2022
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a2a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2040
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2060
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x207e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20be
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20c0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20b0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20de
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fc
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fe
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2061
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2093
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2091
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2095
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2097
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208d
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20ff
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208f
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20fd
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0114
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011f
usb_os_find_busses: Found 001
usb_os_find_devices: Found USB device at location 0x0f000000
usb_os_find_devices: Found 001-05ac-8005-09-00 on 001 at location 0x0f000000
usb_os_find_devices: Found USB device at location 0x0f200000
usb_os_find_devices: Found 002-04b8-0101-ff-ff on 001 at location 0x0f200000
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160
[sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0006
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0008
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0873
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0010
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1005
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1105
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0201
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0601
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8, product=0x4002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021e
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0218
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0219
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021a
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021d
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021c
[sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0210
[sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x002d
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0400
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0402
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0403
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0413
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0422
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2011
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201b
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2017
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201a
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201f
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2014
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0444
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_debug] Setting debug level of epson to 255.
[epson] sane_init: sane-backends 1.0.14
[sanei_debug] Setting debug level of sanei_usb to 255.
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't
look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101)
interface 0 at libusb:001:002-04b8-0101-ff-ff
[sanei_usb] sanei_usb_init: found 1 devices
[epson] sane_init, ># epson.conf<
[epson] sane_init, >#<
there was more to this response, but it looked like instructions that
I didn't understand, not response to the Terminal command.
Thanks,