[sane-devel] FreeBSD 5.2 open device failed

Oliver Rauch Oliver.Rauch@Rauch-Domain.DE
Fri, 5 Mar 2004 16:21:19 +0100


I do not think that your scanner is detected, the lines
> [umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9
> [umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S
> V2.9 failed
do not mean that the scanner is detected. This only looks like it because=
 you
put a bad line to the umax.conf file:
> [umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9)

A furhter problem will be that your scanner is not supported.
The firmware version 2.9 is buggy and will not work correct:
http://www.rauch-domain.de/sane-umax/sane-umax-astra-doc.html

So I suggest you update the firmware at first when you want to
use the device with SANE.

Best regards
Oliver

On Friday 05 March 2004 15:45, ATT wrote:
> The scanner is detected well by sane but it fails to open the device as=
 you
> see below.
>
> [umax] sane_init
> [umax] This is sane-umax version 1.0 build 40
> [umax] compiled with USB support for Astra 2200
> [umax] (C) 1997-2002 by Oliver Rauch
> [umax] EMAIL: Oliver.Rauch@rauch-domain.de
> [umax] reading configure file umax.conf
> [umax] option scsi-maxqueue =3D 2
> [umax] option scsi-buffer-size-min =3D 65536
> [umax] option scsi-buffer-size-max =3D 131072
> [umax] option scan-lines =3D 100
> [umax] option preview-lines =3D 20
> [umax] option handle-bad-sense-error =3D 0
> [umax] option execute-request-sense =3D 0
> [umax] option slow-speed =3D -1
> [umax] option calibration-full-ccd =3D -1
> [umax] option lamp-control-available =3D 0
> [umax] option connection-type =3D 1
> [umax] attach_scanner: SCSI UMAX Astra 1200S V2.9, connection_type 1
> [umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9
> [umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S
> V2.9 failed
> [umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9)
> [umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner)
> [umax] attach_scanner: /dev/pass0, connection_type 1
> [umax] attach_scanner: opening scsi device /dev/pass0
> [umax] ERROR: attach_scanner: opening scsi device /dev/pass0 failed
>
> I use the default 5.2 kernel. The scanner ist he only SCSI device.
>
> The scanner works fine on my windows laptop.
>
> Any idea anyone?
>
> Regards,
>
> Frank

--=20
http://www.xsane.org
http://www.rauch-domain.de
http://www.sane-project.org