[sane-devel] microtek slimscan C6 USB

[Henning Meier-Geinitz]

Hi,

On Thu, Mar 11, 2004 at 08:06:37PM -0500, jrlannon1@cox.net wrote:
> I'm trying to get my microtek slimscan C6 USB scanner working under 
> YellowDog Linux 3.0.1 (2.4.22-2g Kernel) running on an eMac.  

Have you tried a more recent kernel?

Even without the microtel module, your scanner should be found by
sane-find-scanner as a USB device and in /proc/bus/usb/devices.

> Finally I plug in the scanner:

Does it work if you don't load the microtek module?

> Mar 11 16:53:37 localhost kernel: hub.c: new USB device 10:18.0-2, assigned address 2
> Mar 11 16:53:37 localhost kernel: usb.c: failed to set device 2 default configuration (error=-110)

That's "Connection timed out". The scanner didn't want to talk to us
when the configuration was set. That's one of the first commands so it
may be a hardware issue. Is the cable ok?

> Mar 11 16:53:37 localhost kernel: hub.c: new USB device 10:18.0-2, assigned address 3
> Mar 11 16:53:37 localhost kernel: usb.c: failed to set device 3 default configuration (error=-110)

Two devices on the same scanner? Strange.

If this happens also with a current kernel, ask the linux-usb-devel
mailing list. That's not a SANE issue but Linux kernel and/or
hardware.

Bye,
  Henning