[sane-devel] Sane and HP C6270A 3828

[Yao Ko]

Hi all,

I have a HP scanner C6270A rev 3828. Here's the output of
/proc/scsi/scsi:


Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: HL-DT-ST Model: CD-RW GCE-8481B  Rev: 1.10
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
  Vendor: HP       Model: C6270A           Rev: 3828
  Type:   Processor                        ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 05 Lun: 00
  Vendor: IOMEGA   Model: ZIP 100          Rev: J.03
  Type:   Direct-Access                    ANSI SCSI revision: 02

sane-find-scanner finds it:

--
found SCSI processor "HP C6270A 3828" at /dev/scanner
found SCSI processor "HP C6270A 3828" at /dev/sg1
found SCSI processor "HP C6270A 3828" at /dev/sgb
  # Your SCSI scanner was detected. It may or may not be supported by SANE. Try
  # scanimage -L and read the backend's manpage.
--


But scanimage -L doesn't detect it!

--
[ko@localhost scsi]# scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
--

Here's the /etc/sane.d/hp.conf:

scsi HP
/dev/sg1


and the hp driver appears in /etc/sane.d/dll.conf

[ko@localhost scsi]# grep hp /etc/sane.d/dll.conf
hp
hpsj5s
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj


Could anyone give some hints as what's wrong?

Thanks,

-- 
Yao Ko
Engineering & Computer Science
Concordia University
Tel: (514) 848-2424 x5879
Office: H1029-7
http://www.cs.concordia.ca/~ko/