[sane-devel] Fail to detect the SCSI card

[Stephen Liu]

Hi Klaus,

FedoraCore2

Tks for your advice which I'll try later.  But there
is something strange happened in this box which I hope
to solve first.

# modprobe -a sg*
WARNING: Module sg* not found.
# modprobe /dev/sg1
FATAL: Module /dev/sg1 not found.
You have new mail in /var/spool/mail/root
# modprobe /dev/sg1
FATAL: Module /dev/sg1 not found.
# modprobe /dev/sg0
FATAL: Module /dev/sg0 not found.
# modprobe /dev/sg4
FATAL: Module /dev/sg4 not found.
# /sbin/insmod /dev/sg4
insmod: can't read '/dev/sg4': No such device or
address
# /sbin/insmod /dev/sg0
insmod: can't read '/dev/sg0': No such device or
address
# /sbin/insmod /dev/sg1
insmod: can't read '/dev/sg1': No such device or
address


# locate modules.conf
/etc/vfs/modules/extra-modules.conf
/etc/vfs/modules/ssl-modules.conf
/etc/vfs/modules/default-modules.conf
/etc/gnome-vfs-2.0/modules/default-modules.conf.with-menu-editing
/etc/gnome-vfs-2.0/modules/ssl-modules.conf
/etc/gnome-vfs-2.0/modules/mapping-modules.conf
/etc/gnome-vfs-2.0/modules/default-modules.conf
/var/cache/man/cat5/modules.conf.5.bz2
/usr/share/man/man5/modules.conf.5.gz

I could not find modules.conf  Any advice?  TIA

B.R.
Stephen


 --- Klaus Dahlke <klaus.dahlke@gmx.de> wrote: 
> On Mon, 22 Nov 2004 01:18:29 +0800 (CST)
> Stephen Liu <satimis@yahoo.com> wrote:
> 
> > Hi folks,
> > 
> > I have been trying hours failing to make following
> > scanner to work again.  Previously It worked on
> RedHat
> > 8 on this box
> > 
> > Alfa SnapScan 310 connected to a ISA SCSI card
> > FedoraCore2
> > =================
> > 
> > This box has another removable hard drive running
> > WinME.  This scanner is still working on WinME
> > 
> > 
> >
> > # find / -name aha152x/
> >
>
/lib/modules/2.6.5-1.358/build/include/config/pcmcia/aha152x
> >
>
/lib/modules/2.6.5-1.358/build/include/config/scsi/aha152x
> >
>
/lib/modules/2.6.8-1.521/build/include/config/pcmcia/aha152x
> >
>
/lib/modules/2.6.8-1.521/build/include/config/scsi/aha152x
> > 17)insmod aha152x aha152x=0x140,9
> > 
> 
> Stephen,
> you need to configure the kernel or at least the
> module to get build. You need something like
> aha152x.ko in 
> '/lib/modules/2.6.8-gentoo-r4/kernel/drivers/scsi'
> directory. 
> 
> If it is an ISA card, make sure you switched on ISA
> support in the kernel.
> 
> > 
> > # /sbin/insmod aha152x aha152x=0x140,9,7,0
> > insmod: can't read 'aha152x': No such file or
> > directory
> 
> As before: the kernel module hasn't been build or is
> not include in the kernel. Ckeck your kernel config,
> (re-)compile and it should work. Have alook at the
> special documentation
> /usr/src/KERNEL/Documentation/scsi/aha152x.txt.
> 
> Cheers,
> Klaus
> 
> -- 
> sane-devel mailing list:
> sane-devel@lists.alioth.debian.org