[sane-devel] BenQ 5000

[Vitaly Lipatov]

I try to get work Benq 5000 scanner, but it does not work:
# scanimage -L
device `snapscan:libusb:001:002' is a Acer FlatbedScanner22 flatbed scanner
[root@server tmp]# scanimage >some.out
[snapscan] Scanner warming up - waiting 32 seconds.
scanimage: open of device snapscan:libusb:001:002 failed: Error during device I/O

It turn on lamp and moving for two seconds, after it failed with the error.

I use firmware 20F8v115.bin from CD.

Info from proc:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=04a5 ProdID=20f8 Rev= 1.20
S:  Manufacturer=Color
S:  Product= FlatbedScanner 22
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner

It look not the same as Benq 5000 from snapscan module table.

Any suggestions?
Will I try use newest kernel or motherboard chipset?

-- 
Lav
Vitaly Lipatov
Saint-Petersburg
GNU! ALT Linux Team! LaTeX! LyX!