[sane-devel] debug usb snapscan 1212U on fedora core 2
koen
koen@koma.be
Fri, 21 Jan 2005 09:17:35 +0100
This is a cryptographically signed message in MIME format.
--------------ms060109060901050505030701
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
Here's my experience with snapscan 1212U on fedora core 2. kernel
2.6.8-1.521smp
Problem is :
* sane-find-scanner always detects the scanner
* After plugging the scanner to the machine, scanimage -L detects the
scanner exactly ONCE.
* A second execution of scanimage -L reports no scanners found.
* Plugging the scanner and immediately starting xsane reports an I/O error.
the scanner is plugged in ...
[root@xiii root]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 009: ID 06bd:0001 AGFA-Gevaert NV SnapScan 1212U
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
unplugging and plugging back gives me a new and higher device number ...
is this normal ?
[root@xiii root]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 010: ID 06bd:0001 AGFA-Gevaert NV SnapScan 1212U
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
so i uncomented the device number in /etc/sane.d/snapscan.conf.
I took the firmware binary from the windows distribution to give it
another shot.
here's my snapscan.conf file :
firmware /etc/sane.d/SnapScan_1212U_2.bin
# Agfa 1212U
usb 0x06bd 0x0001
#/dev/usb/scanner0 bus=usb
#libusb:002:009 bus=usb
so, only the firmware line and the usb+vendor/product line there.
the other tool "sane-troubleshoot" give me this in the log :
[snapscan] usb_read Only 0 bytes read
[snapscan] usb_read: reading: 0x32 0x00 0x00 0x00 0xff 0x00 0x00 0x00
[snapscan] mini_inquiry: snapscan_cmd command failed: Error during
device I/O
[snapscan] snapscani_check_device: mini_inquiry failed with Error during
device I/O.
[root@xiii root]# sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x06bd [AGFA], product=0x0001 [SNAPSCAN
1212U]) at libusb:002:009
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Scanners connected to the parallel port or other proprietary ports
can't be
# detected by this program.
[root@xiii root]# rpm -qa | grep sane
libsane-hpoj-0.91-7
sane-backends-1.0.13-7
xsane-0.92-10
sane-frontends-1.0.11-4
xsane-gimp-0.92-10
sane-backends-devel-1.0.13-7
tried upgrading but lot of dependencies (hotplug, pam,...). I know there
are issues with permission on FC2, but I would be happy scanning as root
initially :-)
this is what the output of scanimage gives me. it hangs always on the
backend snapscan, so somehow it knows it's there ... ???
[root@xiii root]# scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.10 from sane-backends 1.0.13
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan2'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epson'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `hpoj'
[dll] sane_get_devices
[dll] load: searching backend `hpoj' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpoj.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpoj.so.1'
[dll] init: initializing backend `hpoj'
[dll] init: backend `hpoj' is version 1.0.6
[dll] load: searching backend `v4l' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-v4l.so.1'
[dll] init: initializing backend `v4l'
[dll] init: backend `v4l' is version 1.0.2
[dll] load: searching backend `umax1220u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.1
[dll] load: searching backend `umax' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.40
[dll] load: searching backend `teco3' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.5
[dll] load: searching backend `teco1' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.9
[dll] load: searching backend `tamarack' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.35
[dll] load: searching backend `sm3600' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.5
[dll] load: searching backend `sharp' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `ricoh' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pint' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such
file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `nec' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.17
[dll] load: searching backend `mustek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.134
[dll] load: searching backend `microtek2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.6
[dll] load: searching backend `ma1509' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `leo' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.10
[dll] load: searching backend `ibm' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hp5400' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hpsj5s' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.49
[dll] load: searching backend `fujitsu' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.0
[dll] load: searching backend `epson' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[dll] init: backend `epson' is version 1.0.240
[dll] load: searching backend `dmc' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `coolscan2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-coolscan2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan2.so.1'
[dll] init: initializing backend `coolscan2'
[dll] init: backend `coolscan2' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `canon630u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.80
[dll] load: searching backend `apple' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.13
[dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpoj's exit function
[dll] sane_exit: calling backend `v4l's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `coolscan2's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: finished
--
This message has been scanned for viruses and
dangerous content, and is believed to be clean.
--------------ms060109060901050505030701
Content-Type: application/x-pkcs7-signature; name="smime.p7s"
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename="smime.p7s"
Content-Description: S/MIME Cryptographic Signature
MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEH
AQAAoIIJ7TCCAz8wggKooAMCAQICAQ0wDQYJKoZIhvcNAQEFBQAwgdExCzAJ
BgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNh
cGUgVG93bjEaMBgGA1UEChMRVGhhd3RlIENvbnN1bHRpbmcxKDAmBgNVBAsT
H0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2aXNpb24xJDAiBgNVBAMTG1Ro
YXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBDQTErMCkGCSqGSIb3DQEJARYccGVy
c29uYWwtZnJlZW1haWxAdGhhd3RlLmNvbTAeFw0wMzA3MTcwMDAwMDBaFw0x
MzA3MTYyMzU5NTlaMGIxCzAJBgNVBAYTAlpBMSUwIwYDVQQKExxUaGF3dGUg
Q29uc3VsdGluZyAoUHR5KSBMdGQuMSwwKgYDVQQDEyNUaGF3dGUgUGVyc29u
YWwgRnJlZW1haWwgSXNzdWluZyBDQTCBnzANBgkqhkiG9w0BAQEFAAOBjQAw
gYkCgYEAxKY8VXNV+065yplaHmjAdQRwnd/p/6Me7L3N9VvyGna9fww6YfK/
Uc4B1OVQCjDXAmNaLIkVcI7dyfArhVqqP3FWy688Cwfn8R+RNiQqE88r1fOC
dz0Dviv+uxg+B79AgAJk16emu59l0cUqVIUPSAR/p7bRPGEEQB5kGXJgt/sC
AwEAAaOBlDCBkTASBgNVHRMBAf8ECDAGAQH/AgEAMEMGA1UdHwQ8MDowOKA2
oDSGMmh0dHA6Ly9jcmwudGhhd3RlLmNvbS9UaGF3dGVQZXJzb25hbEZyZWVt
YWlsQ0EuY3JsMAsGA1UdDwQEAwIBBjApBgNVHREEIjAgpB4wHDEaMBgGA1UE
AxMRUHJpdmF0ZUxhYmVsMi0xMzgwDQYJKoZIhvcNAQEFBQADgYEASIzRUIPq
Cy7MDaNmrGcPf6+svsIXoUOWlJ1/TCG4+DYfqi2fNi/A9BxQIJNwPP2t4WFi
w9k6GX6EsZkbAMUaC4J0niVQlGLH2ydxVyWN3amcOY6MIE9lX5Xa9/eH1sYI
Tq726jTlEBpbNU1341YheILcIRk13iSx0x1G/11fZU8wggNRMIICuqADAgEC
AgML620wDQYJKoZIhvcNAQEEBQAwYjELMAkGA1UEBhMCWkExJTAjBgNVBAoT
HFRoYXd0ZSBDb25zdWx0aW5nIChQdHkpIEx0ZC4xLDAqBgNVBAMTI1RoYXd0
ZSBQZXJzb25hbCBGcmVlbWFpbCBJc3N1aW5nIENBMB4XDTA0MDMxNTE2MjQy
NVoXDTA1MDMxNTE2MjQyNVowgZsxDTALBgNVBAQTBE1hZXMxDTALBgNVBCoT
BEtvZW4xEjAQBgNVBAMTCUtvZW4gTWFlczEfMB0GCSqGSIb3DQEJARYQa29l
bkBrbW93YXJlLmNvbTEiMCAGCSqGSIb3DQEJARYTa29lbkBkb21haW5uYW1l
cy5iZTEiMCAGCSqGSIb3DQEJARYTaW5mb0Bkb21haW5uYW1lcy5iZTCCASIw
DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALzzHCpgwNpFNwF6iLrfUV7J
Yl1DEVxAsljd9EdHpvRpr6QDwpnljfAnkEDUSPH/2QGaU02160DbKXId7fk6
exCSdDU7tTjibC6cl3XMfCGqZp/fdoishX9IcR5kZ6FGILFicyN2GwTRpYLa
0sO4TW7ouJf/akjvI9/XA1pljwjTfW2x4eKbCEVBTZ6aNdJs2MbgF+diNyom
9xokij3xCjnQS8mkToZHuXaaMzfuztVar916iyc7/1y2LGCdVE2vY8PskVdS
VIT6Mzvlpw42dhHMAO1/VVwJ42fdTDlO3Cuaovj08Xw8M4vu4EWz6AXRW1Xm
VJLeJu+xgMHtvDc4RiUCAwEAAaNXMFUwRQYDVR0RBD4wPIEQa29lbkBrbW93
YXJlLmNvbYETa29lbkBkb21haW5uYW1lcy5iZYETaW5mb0Bkb21haW5uYW1l
cy5iZTAMBgNVHRMBAf8EAjAAMA0GCSqGSIb3DQEBBAUAA4GBACgRLuYM8snT
4kc/MxNzdBGXYvrZSv049QKlt6uZtTu214jB22LWz4GwNQokeKB6FfGQjElu
izbhUKnij/qbx5px2p7QN8GpISLSJPie7tBp5t1VG+eNdUvf8pksagqbQ3i2
lDitubFml3iWOl20yBRRWdCr7rheQg6jlRBTKKOjMIIDUTCCArqgAwIBAgID
C+ttMA0GCSqGSIb3DQEBBAUAMGIxCzAJBgNVBAYTAlpBMSUwIwYDVQQKExxU
aGF3dGUgQ29uc3VsdGluZyAoUHR5KSBMdGQuMSwwKgYDVQQDEyNUaGF3dGUg
UGVyc29uYWwgRnJlZW1haWwgSXNzdWluZyBDQTAeFw0wNDAzMTUxNjI0MjVa
Fw0wNTAzMTUxNjI0MjVaMIGbMQ0wCwYDVQQEEwRNYWVzMQ0wCwYDVQQqEwRL
b2VuMRIwEAYDVQQDEwlLb2VuIE1hZXMxHzAdBgkqhkiG9w0BCQEWEGtvZW5A
a21vd2FyZS5jb20xIjAgBgkqhkiG9w0BCQEWE2tvZW5AZG9tYWlubmFtZXMu
YmUxIjAgBgkqhkiG9w0BCQEWE2luZm9AZG9tYWlubmFtZXMuYmUwggEiMA0G
CSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC88xwqYMDaRTcBeoi631FeyWJd
QxFcQLJY3fRHR6b0aa+kA8KZ5Y3wJ5BA1Ejx/9kBmlNNtetA2ylyHe35OnsQ
knQ1O7U44mwunJd1zHwhqmaf33aIrIV/SHEeZGehRiCxYnMjdhsE0aWC2tLD
uE1u6LiX/2pI7yPf1wNaZY8I031tseHimwhFQU2emjXSbNjG4BfnYjcqJvca
JIo98Qo50EvJpE6GR7l2mjM37s7VWq/deosnO/9ctixgnVRNr2PD7JFXUlSE
+jM75acONnYRzADtf1VcCeNn3Uw5TtwrmqL49PF8PDOL7uBFs+gF0VtV5lSS
3ibvsYDB7bw3OEYlAgMBAAGjVzBVMEUGA1UdEQQ+MDyBEGtvZW5Aa21vd2Fy
ZS5jb22BE2tvZW5AZG9tYWlubmFtZXMuYmWBE2luZm9AZG9tYWlubmFtZXMu
YmUwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQQFAAOBgQAoES7mDPLJ0+JH
PzMTc3QRl2L62Ur9OPUCpbermbU7tteIwdti1s+BsDUKJHigehXxkIxJbos2
4VCp4o/6m8eacdqe0DfBqSEi0iT4nu7QaebdVRvnjXVL3/KZLGoKm0N4tpQ4
rbmxZpd4ljpdtMgUUVnQq+64XkIOo5UQUyijozGCAzswggM3AgEBMGkwYjEL
MAkGA1UEBhMCWkExJTAjBgNVBAoTHFRoYXd0ZSBDb25zdWx0aW5nIChQdHkp
IEx0ZC4xLDAqBgNVBAMTI1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBJc3N1
aW5nIENBAgML620wCQYFKw4DAhoFAKCCAacwGAYJKoZIhvcNAQkDMQsGCSqG
SIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDUwMTIxMDgxNzM1WjAjBgkqhkiG
9w0BCQQxFgQUWvOHZYJts4iXx6tLyB2HYBV+/V8wUgYJKoZIhvcNAQkPMUUw
QzAKBggqhkiG9w0DBzAOBggqhkiG9w0DAgICAIAwDQYIKoZIhvcNAwICAUAw
BwYFKw4DAgcwDQYIKoZIhvcNAwICASgweAYJKwYBBAGCNxAEMWswaTBiMQsw
CQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg
THRkLjEsMCoGA1UEAxMjVGhhd3RlIFBlcnNvbmFsIEZyZWVtYWlsIElzc3Vp
bmcgQ0ECAwvrbTB6BgsqhkiG9w0BCRACCzFroGkwYjELMAkGA1UEBhMCWkEx
JTAjBgNVBAoTHFRoYXd0ZSBDb25zdWx0aW5nIChQdHkpIEx0ZC4xLDAqBgNV
BAMTI1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBJc3N1aW5nIENBAgML620w
DQYJKoZIhvcNAQEBBQAEggEAOgvUDQy8dDRIKe37Ni+Xv39WxCRV4KhTIWnd
4n1l9uvfACqUqwgzmVZv7o9S7mAIGgzfN6OuIqZnQqG5+8pnK97M08iTUhQ3
5jUE+IxhhgGp+stN6IYjP0b96K2wJxfl9LE7HSxrhISdzt3ZZn0U0HEi2lRj
B07x/Q7YBF3IyUD79kgZhNbt36cFWfSO1aqGVPDScXgPpJD+A4JYKCinfkEL
SHRHBAO3NO3kF8QPKsN0pZEVo34UoLkFCkR1Ci04AaWsdDR2eqXo6Ne9KktY
9JP0JQ7M20lYlMkSwa1WeM4a4acvPg7/ER2msQ+W04GTgbtqfPAo0/zazzZv
vJ6swwAAAAAAAA==
--------------ms060109060901050505030701--