[sane-devel] Epson Perfection 1250Photo doesn't work.

[Slawomir Sejda]

Hi, everybody

I'd like to report the problem with Epson Perfection 1250 Photo and latest 
CVS snapshot.
What's the problem. Scanner is detected by sane-find-scanner:

[vacuum@d4rk5t4r~]%sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

   # No SCSI scanners found. If you expected something different, make sure
     that
   # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner 
010F], chip=LM9832/3) at libusb:001:006
   # Your USB scanner was (probably) detected. It may or may not be
     supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary
     ports
   # can't be detected by this program.

   # You may want to run this program as root to find all devices. Once you
   # found the scanner devices, be sure to adjust access permissions as
   # necessary.
[vacuum@d4rk5t4r~]%

But can't be identified by scanimage:

[vacuum@d4rk5t4r~]%scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[vacuum@d4rk5t4r~]%

And finally the most important is that everything was okey before latest 
changes in plustek backend. So I think something is wrong with that.

Regards, Slawek