[sane-devel] some more libsane.usermap additions

[Karl Heinz Kremer]

I'll take care of this.

Thanks,

Karl Heinz


On Jul 29, 2005, at 9:55 PM, Olaf Meeuwissen wrote:

> Olaf Meeuwissen <olaf at member.fsf.org> writes:
>
>
>> Julien BLACHE <jb at jblache.org> writes:
>>
>>
>>> Olaf Meeuwissen <olaf.meeuwissen at avasys.jp> wrote:
>>>
>>>
>>>> +# Epson Corp.|GT-15000 (ES-7000)
>>>> +# Epson Corp.|Expression 10000XL (ES-10000G)
>>>> +# Epson Corp.|Perfection 4990 (GT-X800)
>>>>
>>>
>>>
>>>> -# Epson Corp.|Stylus CX3650
>>>> +# Epson Corp.|Stylus CX3500/CX3600/CX3650 (PX-A550)
>>>>
>>>
>>>
>>>> +# Epson Corp.|Stylus CX4500/CX4600
>>>>
>>>
>>>
>>>> -# Epson Corp.|Stylus RX620
>>>> +# Epson Corp.|Stylus RX620/RX630 (PM-A870)
>>>>
>>>
>>>
>>>> +# Epson Corp.|Stylus RX700 (PM-A900)
>>>> +# Epson Corp.|(PM-A700)
>>>> +# Epson Corp.|AcuLaser CX11 (LP-A500)
>>>>
>>>
>>> All added/fixed, thanks.
>>>
>>
>> Thanks.
>>
>> I believe there are a few more descriptions that can be fixed and/or
>> extended.  I'll see if I can find some time to check them later this
>> weekend.  Guess I should also prepare a diff to add them to the list
>> of supported scanners in the epson backend (epson_usb.c).
>>
>
> Diff for epson_usb.c attached.  I'll leave the decision whether to add
> this or not so close to the release to Karl Heinz and Julien.
>
> Adds the GT-X800/Perfection 4990, several SPCs and one MFP.  All other
> changes just make the comments a bit more complete and readable.
>
> Note, I have not tested the epson backend with these models but they
> work fine with the epkowa backend.  I checked that backend's sources
> to make sure there is no code specific to these models.
>
> Hope this helps,
> -- 
> Olaf Meeuwissen
> FSF Associate Member #1962           sign up at http://member.fsf.org/
> GnuPG key: 30EF893A/2774 815B DE83 06C8 D733  6B5B 033C C857 30EF 893A
> Penguin's lib!       -- I hack, therefore I am --               LPIC-2
>
> <epson_usb.c.diff>
>