[sane-devel] problems with Fujitsu M3093DG with USB/SCSI
Stefanie Tellex
stefie10 at media.mit.edu
Thu Oct 6 19:11:08 UTC 2005
Hi,
I think I fixed the problem. The SCSI read was returning EOF, and the
driver wasn't incrementing its buffers properly in that case. I changed
it so it doesn't do anything special on EOF, and always increments by
i_data_read, and it seems to work now. Here's a patch against the
latest source:
Maybe the USB interface caused an EOF that wasn't getting sent with
plain SCSI?
Index: backend/fujitsu.c
===================================================================
RCS file: /cvsroot/sane/sane-backends/backend/fujitsu.c,v
retrieving revision 1.32
diff -r1.32 fujitsu.c
3814d3813
< break;
3816,3819d3814
< DBG (10, "reader_process: EOM (no more data) length = %d\n",
< i_data_read);
< data_to_read -= i_data_read;
< i_data_left = data_to_read;
3831c3826
< i_data_left -= data_to_read;
---
> i_data_left -= i_data_read;
patch (END)
Stefanie
Stefanie Tellex wrote:
> Hello,
>
> I have a Fujitsu M3093DG scanner connected via a Microtech
> USB-SCSI-DB25 cable to a Debian DNU/Linux testing system, with sane
> 1.0.16-2.
>
> scanimage seems to talk to the scanner to some degree: it returns
> reasonable error messages when the ADF is jammed or when there's
> nothing in the feeder, and it switches between the ADF and the
> document tray correctly when I pass the --source option.
>
> However, when I run scanimage, it returns very quickly (well before
> the scanner has stopped), and the image file is corrupt. I tried both
> pnm and tiff formats, and gimp couldn't load either one. When I ran
> sane-troubleshoot, the image was black once, and black with stripes once.
> I've attached the logfile from running SANE_DEBUG_FUJITSU=255
> scanimage 1>image.pnm 2> logfile
>
> Another weird thing was the first time I plugged in the scanner, it
> got attached to lots of scsi devices. Here's the log from dmesg:
>
> usb 1-1: new full speed USB device using address 2
> SCSI subsystem initialized
> Initializing USB Mass Storage driver...
> usb-storage: This device (07af,0004,0100 S 06 P 50) has unneeded
> SubClass and Protocol entries in unusual_devs.h
> Please send a copy of this message to
> <linux-usb-devel at lists.sourceforge.net>
> scsi0 : SCSI emulation for USB Mass Storage devices
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 6
> Attached scsi generic sg1 at scsi0, channel 0, id 2, lun 0, type 6
> Attached scsi generic sg2 at scsi0, channel 0, id 3, lun 0, type 6
> Attached scsi generic sg3 at scsi0, channel 0, id 4, lun 0, type 6
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0, type 6
> Vendor: FUJITSU Model: M3093DGdim Rev: 02
> Type: Scanner ANSI SCSI revision: 02
> Attached scsi generic sg5 at scsi0, channel 0, id 6, lun 0, type 6
> USB Mass Storage device found at 2
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
>
>
> I played around with unplugging and replugging it in, and I changed
> the scsi ID on the dial, and then it only made one /dev/sg* drive. I
> plugged and unplugged it a few more times and now it won't detect it
> at all.
>
> Thanks in advance for your help!
>
> Stefanie
>
>------------------------------------------------------------------------
>
>[sanei_debug] Setting debug level of fujitsu to 255.
>[fujitsu] sane_init
>[fujitsu] sane_init: reading config file fujitsu.conf
>[fujitsu] attach_scanner: /dev/sg0
>[fujitsu] attach_scanner: opening /dev/sg0
>[fujitsu] attachScanner opening SCSI device
>[fujitsu] identify_scanner
>[fujitsu] do_inquiry
>[fujitsu] inquiry
>[fujitsu] 000: 12 00 00 00 60 00
>[fujitsu] try inquiry 0
>[fujitsu] <cmd<
>[fujitsu] 000: 12 00 00 00 60 00
>[fujitsu] sanei_scsi_cmd: returning 96 bytes:
>[fujitsu] >rslt>
>[fujitsu] 000: 06 00 02 02 5b 00 00 10 46 55 4a 49 54 53 55 20
>[fujitsu] 010: 4d 33 30 39 33 44 47 64 69 6d 20 20 20 20 20 20
>[fujitsu] 020: 30 32 20 20 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] Found FUJITSU scanner M3093DGdim version 02 on device /dev/sg0, treating as 3093
>[fujitsu] get_vital_product_data
>[fujitsu] get_vital_product_data
>[fujitsu] 000: 12 01 f0 00 64 00
>[fujitsu] <cmd<
>[fujitsu] 000: 12 01 f0 00 64 00
>[fujitsu] sanei_scsi_cmd: returning 100 bytes:
>[fujitsu] >rslt>
>[fujitsu] 000: 06 f0 02 00 5f 01 90 01 90 11 03 20 03 20 00 32
>[fujitsu] 010: 00 32 ff fe 00 00 0d 80 00 00 15 e0 0f 00 00 00
>[fujitsu] 020: d0 08 00 80 00 00 00 00 ed bf 00 01 00 00 00 00
>[fujitsu] 030: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 050: 00 00 ff ff ff 00 48 38 ff 60 e0 00 00 00 00 00
>[fujitsu] standard options
>[fujitsu] basic x res: 400 dpi
>[fujitsu] basic y res: 400 dpi
>[fujitsu] step x res 1 dpi
>[fujitsu] step y res 1 dpi
>[fujitsu] max x res 800 dpi
>[fujitsu] max y res 800 dpi
>[fujitsu] min x res 50 dpi
>[fujitsu] max y res 50 dpi
>[fujitsu] window width 21.95 cm
>[fujitsu] window length 35.56 cm
>[fujitsu] functions:
>[fujitsu] binary scanning: 1
>[fujitsu] gray scanning: 1
>[fujitsu] half-tone scanning: 1
>[fujitsu] color binary scanning: 0
>[fujitsu] color scanning: 0
>[fujitsu] color half-tone scanning: 0
>[fujitsu] image memory: 8388608 bytes
>[fujitsu] physical functions:
>[fujitsu] operator panel 0
>[fujitsu] barcode 0
>[fujitsu] endorser 0
>[fujitsu] duplex 1
>[fujitsu] flatbed 1
>[fujitsu] adf 1
>[fujitsu] image control functions:
>[fujitsu] brightness steps: 255
>[fujitsu] threshold steps: 255
>[fujitsu] contrast steps: 255
>[fujitsu] number of build in gamma patterns: 3
>[fujitsu] number of download gamma patterns: 8
>[fujitsu] compression processing functions:
>[fujitsu] compression MR: 1
>[fujitsu] compression MR: 1
>[fujitsu] compression MMR: 1
>[fujitsu] compression JBIG: 0
>[fujitsu] compression JPG1: 0
>[fujitsu] compression JPG2: 0
>[fujitsu] compression JPG3: 0
>[fujitsu] image processing functions:
>[fujitsu] black and white reverse: 1
>[fujitsu] automatic binary DTC: 1
>[fujitsu] simplified DTC: 1
>[fujitsu] autline extraction: 1
>[fujitsu] image emphasis: 1
>[fujitsu] automatic separation: 1
>[fujitsu] mirror image: 1
>[fujitsu] white level follower: 1
>[fujitsu]
>
>[fujitsu] range: 14382268 23304601
>[fujitsu] ADF: present
>[fujitsu] Duplex Unit: present
>[fujitsu] Duplex Raster Offset: 0
>[fujitsu] Color Raster Offset: 0
>[fujitsu] attach_scanner: done
>[fujitsu] sane_get_devices 0
>[fujitsu] sane_open: device /dev/sg0 requested
>[fujitsu] sane_open: device /dev/sg0 found
>[fujitsu] init_options
>[fujitsu] init_options: set compression 1
>[fujitsu] ok compression 1
>[fujitsu] init_options:ok
>[fujitsu] calculateDerivedValues
>[fujitsu] top_margin: 0
>[fujitsu] left_margin: 0
>[fujitsu] scan_width: 0
>[fujitsu] scan_height: 0
>[fujitsu] calculateDerivedValues: ok
>[fujitsu] sane_control_option: get value "filler"
>[fujitsu] cap = 4
>[fujitsu] sane_control_option: get value "filler"
>[fujitsu] cap = 4
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "source"
>[fujitsu] sane_get_option_descriptor: "mode"
>[fujitsu] sane_get_option_descriptor: "duplex"
>[fujitsu] sane_get_option_descriptor: "resolution"
>[fujitsu] sane_get_option_descriptor: "y-resolution"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "tl-x"
>[fujitsu] sane_get_option_descriptor: "tl-y"
>[fujitsu] sane_get_option_descriptor: "br-x"
>[fujitsu] sane_control_option: get value "br-x"
>[fujitsu] cap = 5
>[fujitsu] sane_get_option_descriptor: "br-y"
>[fujitsu] sane_control_option: get value "br-y"
>[fujitsu] cap = 5
>[fujitsu] sane_get_option_descriptor: "pagewidth"
>[fujitsu] sane_get_option_descriptor: "pageheight"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "averaging"
>[fujitsu] sane_get_option_descriptor: "brightness"
>[fujitsu] sane_get_option_descriptor: "threshold"
>[fujitsu] sane_get_option_descriptor: "contrast"
>[fujitsu] sane_get_option_descriptor: "rif"
>[fujitsu] sane_get_option_descriptor: "compression"
>[fujitsu] sane_get_option_descriptor: "compressionarg"
>[fujitsu] sane_get_option_descriptor: "dtcselection"
>[fujitsu] sane_get_option_descriptor: "gamma"
>[fujitsu] sane_get_option_descriptor: "outline"
>[fujitsu] sane_get_option_descriptor: "emphasis"
>[fujitsu] sane_get_option_descriptor: "autoseparation"
>[fujitsu] sane_get_option_descriptor: "mirroring"
>[fujitsu] sane_get_option_descriptor: "variancerate"
>[fujitsu] sane_get_option_descriptor: "thresholdcurve"
>[fujitsu] sane_get_option_descriptor: "gradation"
>[fujitsu] sane_get_option_descriptor: "smoothingmode"
>[fujitsu] sane_get_option_descriptor: "filtering"
>[fujitsu] sane_get_option_descriptor: "background"
>[fujitsu] sane_get_option_descriptor: "noiseremoval"
>[fujitsu] sane_get_option_descriptor: "matrix2x2"
>[fujitsu] sane_get_option_descriptor: "matrix3x3"
>[fujitsu] sane_get_option_descriptor: "matrix4x4"
>[fujitsu] sane_get_option_descriptor: "matrix5x5"
>[fujitsu] sane_get_option_descriptor: "whitelevelfollow"
>[fujitsu] sane_get_option_descriptor: "papersize"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "orientation"
>[fujitsu] sane_get_option_descriptor: "dropoutcolor"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "lampcolor"
>[fujitsu] sane_get_option_descriptor: "blueoffset"
>[fujitsu] sane_get_option_descriptor: "greenoffset"
>[fujitsu] sane_get_option_descriptor: "swapfile"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "filler"
>[fujitsu] sane_get_option_descriptor: "sleeptimer"
>[fujitsu] sane_control_option: get value "tl-x"
>[fujitsu] cap = 5
>[fujitsu] sane_control_option: get value "tl-y"
>[fujitsu] cap = 5
>[fujitsu] sane_control_option: get value "tl-x"
>[fujitsu] cap = 5
>[fujitsu] sane_get_option_descriptor: "br-x"
>[fujitsu] sane_control_option: set value "br-x"
>[fujitsu] calculateDerivedValues
>[fujitsu] top_margin: 0
>[fujitsu] left_margin: 0
>[fujitsu] scan_width: 10199
>[fujitsu] scan_height: 14031
>[fujitsu] calculateDerivedValues: ok
>scanimage: rounded value of br-x from 215.9 to 215.893
>[fujitsu] sane_control_option: get value "tl-y"
>[fujitsu] cap = 5
>[fujitsu] sane_get_option_descriptor: "br-y"
>[fujitsu] sane_control_option: set value "br-y"
>[fujitsu] calculateDerivedValues
>[fujitsu] top_margin: 0
>[fujitsu] left_margin: 0
>[fujitsu] scan_width: 10199
>[fujitsu] scan_height: 14031
>[fujitsu] calculateDerivedValues: ok
>scanimage: rounded value of br-y from 297 to 296.994
>[fujitsu] sane_start
>[fujitsu] object_count = 0
>[fujitsu] duplex_mode = DUPLEX_FRONT
>[fujitsu] use_temp_file = no
>[fujitsu] sane_start opening SCSI device
>[fujitsu] grab_scanner
>[fujitsu] wait_scanner
>[fujitsu] test_unit_ready
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] wait_scanner: ok
>[fujitsu] reserve_unit
>[fujitsu] 000: 16 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 16 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] grab_scanner: ok
>[fujitsu] set_mode_params
>[fujitsu] set_mode_params: ok
>[fujitsu] send
>[fujitsu] send: ok
>[fujitsu] object_position: load
>[fujitsu] object_position
>[fujitsu] 000: 31 01 00 00 00 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 31 01 00 00 00 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] wait_scanner
>[fujitsu] test_unit_ready
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] wait_scanner: ok
>[fujitsu] object_position: ok
>[fujitsu] wait_scanner
>[fujitsu] test_unit_ready
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 00 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] wait_scanner: ok
>[fujitsu] set_window_param
>[fujitsu] Window set
>[fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 010: 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00 00 00
>[fujitsu] 020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0
>[fujitsu] 030: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 24 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00
>[fujitsu] 010: 00 40 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00
>[fujitsu] 020: 00 00 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00
>[fujitsu] 030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 040: 00 a0 20 00 00 00 00 84 00 00 00 00 00 00 00 00
>[fujitsu] 050: 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] set_window_param: ok
>[fujitsu] calculateDerivedValues
>[fujitsu] top_margin: 0
>[fujitsu] left_margin: 0
>[fujitsu] scan_width: 10199
>[fujitsu] scan_height: 14031
>[fujitsu] calculateDerivedValues: ok
>[fujitsu] bytes per line = 2549
>[fujitsu] pixels_per_line = 2549
>[fujitsu] lines = 3507
>[fujitsu] brightness (halftone) = 0
>[fujitsu] threshold (line art) = 0
>[fujitsu] start_scan
>[fujitsu] start_scan
>[fujitsu] 000: 1b 00 00 00 01 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 1b 00 00 00 01 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] start_scan:ok
>[fujitsu] reader_process started
>[fujitsu] reader_process: starting to READ data
>[fujitsu] read_large_data_block requested 30588 bytes
>[fujitsu] <cmd<
>[fujitsu] 000: 28 00 00 00 00 00 00 77 7c 00
>[fujitsu] sane_start: ok
>[fujitsu] sane_get_parameters
>[fujitsu] calculateDerivedValues
>[fujitsu] top_margin: 0
>[fujitsu] left_margin: 0
>[fujitsu] scan_width: 10199
>[fujitsu] scan_height: 14031
>[fujitsu] calculateDerivedValues: ok
>[fujitsu] depth 8
>[fujitsu] lines 3507
>[fujitsu] pixels_per_line 2549
>[fujitsu] bytes_per_line 2549
>[fujitsu] sane_read, object_count=1
>[fujitsu] 0/0/0: Scanner ready
>[fujitsu] sanei_scsi_cmd: returning 0x00000005
>[fujitsu] sanei_scsi_cmd: returning 30588 bytes:
>[fujitsu] >rslt>
>[fujitsu] 000: 00 00 00 00 00 00 00 40 00 00 01 2c 01 2c 00 00
>[fujitsu] 010: 00 00 00 00 00 00 00 00 27 d7 00 00 36 cf 00 00
>[fujitsu] 020: 00 02 08 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 030: 00 00 00 00 00 00 00 a0 20 00 00 00 00 84 00 00
>[fujitsu] 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[fujitsu] 050: 00 00 ff ff ff 00 48 38 ff 60 e0 00 00 00 00 00
>[fujitsu] reader_process: EOM (no more data) length = 30588
>[fujitsu] sane_read: read 28672 bytes of 32768
>[fujitsu] sane_read, object_count=1
>[fujitsu] sane_read: read 1916 bytes of 32768
>[fujitsu] sane_read, object_count=1
>[fujitsu] reader_process(generic): buffer of 0 bytes read; 0 bytes to go
>[fujitsu] sane_read: read 0 bytes of 32768
>[fujitsu] sane_read: pipe closed
>[fujitsu] sane_cancel
>[fujitsu] do_cancel
>[fujitsu] do_cancel: kill reader_process
>[fujitsu] wait for scanner to stop
>[fujitsu] free_scanner
>[fujitsu] release_unit
>[fujitsu] 000: 17 00 00 00 00 00
>[fujitsu] <cmd<
>[fujitsu] 000: 17 00 00 00 00 00
>[fujitsu] sanei_scsi_cmd: returning 0 bytes:
>[fujitsu] free_scanner: ok
>[fujitsu] do_cancel: close filedescriptor
>[fujitsu] sane_close
>[fujitsu] sane_exit
>
>
More information about the sane-devel
mailing list