[sane-devel] UMAX Astra 1200S-C SCSI Scanner on Mac 10.2.8

J.J. Sroka srokajj at mindspring.com
Sun Oct 16 18:36:27 UTC 2005


This Terminal Session first runs

scanimage -L        and           sane-find-scanner

with     umax.conf   having the line    scsi UMAX * Scanner * * * 0

and everything in      dll.conf            commented out except for     
    umax.



The second run is with
umax.conf   having the line    scsi UMAX * Scanner
and    dll.conf  the same as in the first (above) run.

The results are as before.

***************  Terminal Session  ***************
Last login: Sun Oct 16 11:00:34 on console
Welcome to Darwin!
                      This is the .tcshrc file speaking...
                                Hello, Boobie!
                      This is the .cshrc file speaking...
                             I'm new here, Bubba!
                      This is the .login file speaking...
                            What can I do for you?
[J-1:~] joe% cd /usr/local/bin
[J-1:/usr/local/bin] joe% setenv SANE_DEBUG_UMAX 12
[J-1:/usr/local/bin] joe% cat /usr/local/etc/sane.d/umax.conf
#
# Options for the umax backend
#

# define scsi queueing depth
#option scsi-maxqueue 2

# define scsi buffer size in bytes
#option scsi-buffer-size-min 65536
#option scsi-buffer-size-max 262144

# define scan lines that shall be read in one block
#option scan-lines 100
#option preview-lines 20

# define how to handle bad sense codes
#   0 = handle as device busy
#   1 = handle as ok
#   2 = handle as i/o error
#   3 = ignore bad error code - continue sense handler,
#option handle-bad-sense-error 0

# define if a request sense command shall be executed
#option execute-request-sense 0

# define if the preview bit shall be set when scanning in rgb mode
#option force-preview-bit-rgb 0

# define if slow speed flag shall be set
# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET 
FALSE
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option slow-speed 0

# define if care-about-smeraring flag shall be set
# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET 
FALSE
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option care-about-smearing 0

# define if the calibration shall be done for selected scanarea or for 
each ccd pixel
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option calibration-full-ccd 1

# define if an offset of the calculate calibration with has to be used
# -99999 = auto
#option calibration-width-offset -99999

# define the number of pixels that is used for calibration
# -1 = disabled
#  0 = not set
#  1 = 1 byte/pixel,
#  2 = 2 bytes/pixel
#option calibration-bytes-pixel -1

# define if scanner uses the same exposure times for red, green and blue
# -1 = automatically set by driver - if known
#  0 = disabled (own selection for red, green and blue)
#  1 = enabled (same values for red, green and blue)
#options exposure-time-rgb-bind 0

# define if shading data shall be inverted befor sending it back to the 
scanner
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option invert-shading-data 0

# define if the scanner supports lamp control commands
# 0 = automatically set by driver - if known
# 1 = enabled
#option lamp-control-available 0

# define how 16 bit gamma data is padded
# -1 = automatically set by driver - if known
#  0 = gamma data is msb padded
#  1 = gamma data is lsb padded
#option gamma-lsb-padded 0

# define connection type of following devices
# 1 = scsi
# 2 = usb
#option connection-type 1

# linux device identification:
#scsi vendor model type bus channel id lun
scsi UMAX * Scanner * * * 0
scsi LinoHell JADE
scsi LinoHell Office
scsi LinoHell Office2
scsi LinoHell SAPHIR2
scsi LinoHell SAPHIR3
scsi Linotype SAPHIR4
scsi LinoHell OPAL2
scsi HDM LS4H1S
scsi Nikon AX-110
scsi Nikon AX-210
scsi KYE ColorPage-HR5
scsi EPSON Perfection600
scsi ESCORT "Galleria 600S"
scsi TriGem PowerScanII

# Umax Astra 2200 via USB:
# usb vendor product
usb 0x1606 0x0230

# scsi device list
option connection-type 1
/dev/scanner

# usb device list
option connection-type 2
/dev/usbscanner

[J-1:/usr/local/bin] joe% cat /usr/local/etc/sane.d/dll.conf
# enable the next line if you want to allow access through the network:
#net
#abaton
#agfafocus
#apple
#avision
#artec
#artec_eplus48u
#as6e
#bh
#canon
#canon630u
#canon_pp
#coolscan
#coolscan2
#dc25
#dc210
#dc240
#dmc
#epson
#fujitsu
#gphoto2
#genesys
#gt68xx
#hp
#hpsj5s
#hp4200
#hp5400
#ibm
#leo
#ma1509
#matsushita
#microtek
#microtek2
#mustek
#mustek_pp
#mustek_usb
#mustek_usb2
#nec
#niash
#pie
#pint
#plustek
#plustek_pp
#pnm
#qcam
#ricoh
#s9036
#sceptre
#sharp
#sm3600
#sm3840
#snapscan
#sp15c
#st400
#tamarack
#teco1
#teco2
#teco3
#test
#u12
umax
#umax_pp
#umax1220u
#v4l
#
# The following backends are not included in the sane-backends 
distribution
# If you want to use them, download them from their webpages and read 
their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
[J-1:/usr/local/bin] joe% sudo ./scanimage -L
Password:
[sanei_debug] Setting debug level of umax to 12.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 44
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch at rauch-domain.de
[umax] reading configure file umax.conf
[umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner * * * 0)
[umax] sanei_config_attach_matching_devices(scsi LinoHell JADE)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office2)
[umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR2)
[umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR3)
[umax] sanei_config_attach_matching_devices(scsi Linotype SAPHIR4)
[umax] sanei_config_attach_matching_devices(scsi LinoHell OPAL2)
[umax] sanei_config_attach_matching_devices(scsi HDM LS4H1S)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-110)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-210)
[umax] sanei_config_attach_matching_devices(scsi KYE ColorPage-HR5)
[umax] sanei_config_attach_matching_devices(scsi EPSON Perfection600)
[umax] sanei_config_attach_matching_devices(scsi ESCORT "Galleria 600S")
[umax] sanei_config_attach_matching_devices(scsi TriGem PowerScanII)
[umax] sanei_usb_attach_matching_devices(usb 0x1606 0x0230)
[umax] option connection-type = 1
[umax] attach_scanner: /dev/scanner, connection_type 1
[umax] attach_scanner: opening scsi device /dev/scanner
[umax] ERROR: attach_scanner: opening scsi device /dev/scanner failed
[umax] option connection-type = 2
[umax] attach_scanner: /dev/usbscanner, connection_type 2
[umax] attach_scanner: opening usb device /dev/usbscanner
[umax] sanei_umaxusb_open: open of `/dev/usbscanner' failed: Invalid 
argument
[umax] ERROR: attach_scanner: opening usb device /dev/usbscanner failed
[umax] finished reading configure file
[umax] sane_get_devices(local_only = 0)

No scanners were identified. If you were expecting something different,
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[umax] sane_exit
[J-1:/usr/local/bin] joe% sudo ./sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l0
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l1
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l2
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l3
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l4
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l5
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l6
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l7
   # Your SCSI scanner was detected. It may or may not be supported by 
SANE. Try
   # scanimage -L and read the backend's manpage.

found USB scanner (vendor=0x050d [Belkin Components], product=0x0103 
[USB-232 Adapter]) at libusb:001:002-050d-0103-00-00
   # Your USB scanner was (probably) detected. It may or may not be 
supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary 
ports
   # can't be detected by this program.
[J-1:/usr/local/bin] joe% sudo pico /usr/local/etc/sane.d/umax.conf

    UW PICO(tm) 2.5        File: /usr/local/etc/sane.d/umax.conf


# define how 16 bit gamma data is padded
# -1 = automatically set by driver - if known
#  0 = gamma data is msb padded
#  1 = gamma data is lsb padded
#option gamma-lsb-padded 0

# define connection type of following devices
# 1 = scsi
# 2 = usb
#option connection-type 1

# linux device identification:
#scsi vendor model type bus channel id lun
scsi UMAX * Scanner
scsi LinoHell JADE
scsi LinoHell Office
scsi LinoHell Office2
scsi LinoHell SAPHIR2
scsi LinoHell SAPHIR3
scsi Linotype SAPHIR4
scsi LinoHell OPAL2
scsi HDM LS4H1S
scsi Nikon AX-110
scsi Nikon AX-210
scsi KYE ColorPage-HR5
scsi EPSON Perfection600
                               [ Wrote 117 lines ]

[J-1:/usr/local/bin] joe% cat /usr/local/etc/sane.d/umax.conf
#
# Options for the umax backend
#

# define scsi queueing depth
#option scsi-maxqueue 2

# define scsi buffer size in bytes
#option scsi-buffer-size-min 65536
#option scsi-buffer-size-max 262144

# define scan lines that shall be read in one block
#option scan-lines 100
#option preview-lines 20

# define how to handle bad sense codes
#   0 = handle as device busy
#   1 = handle as ok
#   2 = handle as i/o error
#   3 = ignore bad error code - continue sense handler,
#option handle-bad-sense-error 0

# define if a request sense command shall be executed
#option execute-request-sense 0

# define if the preview bit shall be set when scanning in rgb mode
#option force-preview-bit-rgb 0

# define if slow speed flag shall be set
# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET 
FALSE
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option slow-speed 0

# define if care-about-smeraring flag shall be set
# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET 
FALSE
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option care-about-smearing 0

# define if the calibration shall be done for selected scanarea or for 
each ccd pixel
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option calibration-full-ccd 1

# define if an offset of the calculate calibration with has to be used
# -99999 = auto
#option calibration-width-offset -99999

# define the number of pixels that is used for calibration
# -1 = disabled
#  0 = not set
#  1 = 1 byte/pixel,
#  2 = 2 bytes/pixel
#option calibration-bytes-pixel -1

# define if scanner uses the same exposure times for red, green and blue
# -1 = automatically set by driver - if known
#  0 = disabled (own selection for red, green and blue)
#  1 = enabled (same values for red, green and blue)
#options exposure-time-rgb-bind 0

# define if shading data shall be inverted befor sending it back to the 
scanner
# -1 = automatically set by driver - if known
#  0 = disabled
#  1 = enabled
#option invert-shading-data 0

# define if the scanner supports lamp control commands
# 0 = automatically set by driver - if known
# 1 = enabled
#option lamp-control-available 0

# define how 16 bit gamma data is padded
# -1 = automatically set by driver - if known
#  0 = gamma data is msb padded
#  1 = gamma data is lsb padded
#option gamma-lsb-padded 0

# define connection type of following devices
# 1 = scsi
# 2 = usb
#option connection-type 1

# linux device identification:
#scsi vendor model type bus channel id lun
scsi UMAX * Scanner
scsi LinoHell JADE
scsi LinoHell Office
scsi LinoHell Office2
scsi LinoHell SAPHIR2
scsi LinoHell SAPHIR3
scsi Linotype SAPHIR4
scsi LinoHell OPAL2
scsi HDM LS4H1S
scsi Nikon AX-110
scsi Nikon AX-210
scsi KYE ColorPage-HR5
scsi EPSON Perfection600
scsi ESCORT "Galleria 600S"
scsi TriGem PowerScanII

# Umax Astra 2200 via USB:
# usb vendor product
usb 0x1606 0x0230

# scsi device list
option connection-type 1
/dev/scanner

# usb device list
option connection-type 2
/dev/usbscanner

[J-1:/usr/local/bin] joe% sudo ./scanimage -L
[sanei_debug] Setting debug level of umax to 12.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 44
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch at rauch-domain.de
[umax] reading configure file umax.conf
[umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner)
[umax] attach_scanner: u4t4l1, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l1
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l1
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l2, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l2
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l2
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l3, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l3
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l3
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l4, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l4
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l4
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l5, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l5
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l5
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l6, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l6
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l6
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_scanner: u4t4l7, connection_type 1
[umax] attach_scanner: opening scsi device u4t4l7
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer 
size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue          = 2
[umax] request_preview_lines          = 10
[umax] request_scan_lines             = 40
[umax] handle_bad_sense_error         = 0
[umax] execute_request_sense          = 0
[umax] scsi_buffer_size_min           = 32768
[umax] scsi_buffer_size_max           = 131072
[umax] force_preview_bit_rgb          = 0
[umax] slow                           = -1
[umax] smear                          = -1
[umax] calibration_area               = -1
[umax] calibration_width_offset       = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp            = -1
[umax] exposure_time_rgb_bind         = -1
[umax] invert_shading_data            = -1
[umax] lamp_control_available         = 0
[umax] backend runs on big endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX  scanner Astra 1200S version V2.9 on device u4t4l7
[umax] umax_correct_inquiry("UMAX  Astra 1200S  V2.9")
[umax] using standard options for Astra 1200S
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX    '
[umax] product.......................: 'Astra 1200S     '
[umax] version.......................: 'V2.9'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) 
download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 14.00 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.70 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max     = 215.899994
[umax] y_range.max     = 355.599991
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] sanei_config_attach_matching_devices(scsi LinoHell JADE)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office2)
[umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR2)
[umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR3)
[umax] sanei_config_attach_matching_devices(scsi Linotype SAPHIR4)
[umax] sanei_config_attach_matching_devices(scsi LinoHell OPAL2)
[umax] sanei_config_attach_matching_devices(scsi HDM LS4H1S)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-110)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-210)
[umax] sanei_config_attach_matching_devices(scsi KYE ColorPage-HR5)
[umax] sanei_config_attach_matching_devices(scsi EPSON Perfection600)
[umax] sanei_config_attach_matching_devices(scsi ESCORT "Galleria 600S")
[umax] sanei_config_attach_matching_devices(scsi TriGem PowerScanII)
[umax] sanei_usb_attach_matching_devices(usb 0x1606 0x0230)
[umax] option connection-type = 1
[umax] attach_scanner: /dev/scanner, connection_type 1
[umax] attach_scanner: opening scsi device /dev/scanner
[umax] ERROR: attach_scanner: opening scsi device /dev/scanner failed
[umax] option connection-type = 2
[umax] attach_scanner: /dev/usbscanner, connection_type 2
[umax] attach_scanner: opening usb device /dev/usbscanner
[umax] sanei_umaxusb_open: open of `/dev/usbscanner' failed: Invalid 
argument
[umax] ERROR: attach_scanner: opening usb device /dev/usbscanner failed
[umax] finished reading configure file
[umax] sane_get_devices(local_only = 0)
device `umax:u4t4l7' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l6' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l5' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l4' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l3' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l2' is a UMAX     Astra 1200S      flatbed scanner
device `umax:u4t4l1' is a UMAX     Astra 1200S      flatbed scanner
[umax] sane_exit
[J-1:/usr/local/bin] joe% sudo ./sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l0
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l1
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l2
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l3
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l4
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l5
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l6
found SCSI scanner "UMAX Astra 1200S V2.9" at u4t4l7
   # Your SCSI scanner was detected. It may or may not be supported by 
SANE. Try
   # scanimage -L and read the backend's manpage.

found USB scanner (vendor=0x050d [Belkin Components], product=0x0103 
[USB-232 Adapter]) at libusb:001:002-050d-0103-00-00
   # Your USB scanner was (probably) detected. It may or may not be 
supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary 
ports
   # can't be detected by this program.
[J-1:/usr/local/bin] joe% logout
[Process completed]

---  Thanks

---  Joseph




More information about the sane-devel mailing list