[sane-devel] Microtek Scanmaker 35t+ "Error during device I/O"
James Tuttle
jwtuttle at gmail.com
Mon Jun 5 04:53:39 UTC 2006
Hi, everyone.
I am trying to get my Microtek Scanmaker 35t+ SCSI slide scanner
working on my Ubuntu box, and I'm not having any luck. In particular,
everything seems to be working right, but when I try to scan, I get a
"Error during device I/O" error and then everything just stops. I'm
hoping somebody out there can help me.
I don't know what information to provide so I'll start with the
basics: machine is a P4 running Kubuntu (Ubunutu+KDE) Breezy, with an
OrangeMicro Grappler 906F SCSI card. The card works fine for other
applications; I have a tape changer/drive connected through it which
is great.
Running a cat /proc/scsi/scsi on the system shows this about the
scanner:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: MICROTEK Model: ScanMaker 35t+ Rev: 1.40
Type: Scanner ANSI SCSI revision: 01 CCS
I have modprobe sg being run as part of my bootmisc script, and the
scanner is /dev/sg2 (sg0 and sg1 belong to the tape drive).
scanimage -L doesn't produce any errors. I will append its output to
the bottom of the message, but at least to my untrained eye there
didn't seem to be anything amiss.
The problem is when I try to actually use the scanner via scanimage
or xsane. The output it gives me is basically the same stuff as
scanimage -L, but then followed by its actual attempts to scan, which
fail:
[microtek] sane_start...
[microtek] sane_get_parameters...
[microtek] sane_get_parameters: regular 1-pass color
[microtek] sane_get_parameters: res_code = 5 ( 5)
[microtek] bright_r of 0 set to 0x0
[microtek] sane_get_parameters: dots_per_mm: 3.937008
[microtek] sane_get_parameters: units_per_mm: 76.771654
[microtek] WIDTHPIX: before exp: 136
[microtek] sane_get_parameters: lines: 137 ppl: 136 bpl: 408
[microtek] .wait_ready 5...
[microtek] finagle_precal...
[microtek] .scanning_frame...
[microtek] .scanning_frame: in- 0,0 2686,2686
[microtek] .scanning_frame: out- 0,0 2686,2686
[microtek] .accessory...
[microtek] .download_gamma...
[microtek] .download_gamma: 1024 entries of 2 bytes, max 255
[microtek] .download_gamma: by default
[microtek] end_scan...
scanimage: sane_start: Error during device I/O
[microtek] sane_cancel...
[microtek] end_scan...
[microtek] sane_close...
[microtek] sane_exit...
[microtek] sane_exit: MICROTEK says goodbye.
That's the most I can get it to do. Running xsane does the same thing
but gives me the error in a dialog instead of on the console. I've
tried playing around with the file permissions on /dev/sg2 and /dev/
scanner, checking the config files, running it as root ... I can't
get it to do anything more. Since this scanner allegedly works with
Sane, I'm hoping maybe someone can shed some light on the problem?
Thanks very much in advance!
-James Tuttle
jwtuttle at gmail.com
Following is the complete output of scanimage -T, with maximum
debugging verbosity:
[sanei_debug] Setting debug level of microtek to 128.
[microtek] sane_init: MICROTEK says hello! (v0.13.1)
[microtek] sane_init: config-> # Uncomment following line to disable
"real calibration" routines...
[microtek] sane_init: config-> #norealcal
[microtek] sane_init: config-> # Uncomment following line to disable
"clever precalibration" routines...
[microtek] sane_init: config-> #noprecal
[microtek] sane_init: config-> # Using "norealcal" will revert
backend to pre-0.11.0 calibration code.
[microtek] sane_init: config-> scsi * * Scanner
[microtek] attach_scanner: /dev/sg2
[microtek] attach_scanner: opening /dev/sg2
[microtek] attach_scanner: sending INQUIRY
[microtek] id_microtek...
[microtek] parse_inquiry...
[microtek] parse_inquiry: Not an E6 -- pretend recal cannot be
disabled.
[microtek] dump_inquiry...
[microtek] === SANE/Microtek backend v0.13.1 ===
[microtek] ========== Scanner Inquiry Block ========mm
[microtek] 06 31 19 01 5b 00 00 00 4d 49 43 52 4f 54 45 4b
[microtek] 53 63 61 6e 4d 61 6b 65 72 20 33 35 74 2b 20 20
[microtek] 31 2e 34 30 53 43 53 49 20 46 2f 57 56 33 2e 34
[microtek] 20 43 54 4c 35 33 38 30 03 ef 8c c2 80 ec 62 23
[microtek] 01 03 23 01 00 83 00 01 0e 0e 01 05 00 00 00 00
[microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
[microtek] ========== Scanner Inquiry Report ==========
[microtek] ===== Scanner ID...
[microtek] Device Type Code: 0x06
[microtek] Model Code: 0x62
[microtek] Vendor Name: 'MICROTEK' Model Name: 'ScanMaker 35t+ '
[microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380'
[microtek] Firmware Rev: '1.40'
[microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.9
[microtek] Response data format: 0x01
[microtek] ===== Imaging Capabilities...
[microtek] Modes: Lineart Halftone Gray Color (X-msv) (OnePass)
(Negative)
[microtek] Resolution Step Sizes: 1% 5% Expanded Resolution
Support? yes
[microtek] Supported Bits Per Sample: 4 8
[microtek] Max. document size code: 0x80
[microtek] Max. document size: 2686 x 2686 pixels
[microtek] Frame units: pixels 1/8"'s
[microtek] # of built-in halftones: 12 Downloadable patterns? Yes
[microtek] Data Compression:
[microtek] Contrast Settings: 14 Exposure Settings: 14
[microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes
[microtek] Digital brightness/offset? yes
[microtek] Gamma Table Size: 1024 entries of 2 bytes (max. depth: 10)
[microtek] ===== Source Options...
[microtek] Feed type: edge-feed ADF support? no
[microtek] Document Feeder Support? yes Feeder Backtracking? yes
[microtek] Feeder Installed? no Feeder Ready? no
[microtek] Transparency Adapter Installed? no
[microtek] Fast Color Prescan? yes
[microtek] Selectable Transfer Format? no
[microtek] Color Transfer Sequence: line-by-line, non-sequential with
headers
[microtek] Three pass scan support? no
[microtek] ModeSelect-1 and ModeSense-1 Support? yes
[microtek] Can Disable Linearization Table? no
[microtek] Can Disable Start-of-Scan Recalibration? no
[microtek] Internal expanded expansion? no
[microtek] ====== End of Scanner Inquiry Report =======
[microtek] attach_scanner: happy.
[microtek] sane_init: config-> /dev/scanner
[microtek] attach_scanner: /dev/scanner
[microtek] attach_scanner: opening /dev/scanner
[microtek] attach_scanner: sending INQUIRY
[microtek] id_microtek...
[microtek] parse_inquiry...
[microtek] parse_inquiry: Not an E6 -- pretend recal cannot be
disabled.
[microtek] dump_inquiry...
[microtek] === SANE/Microtek backend v0.13.1 ===
[microtek] ========== Scanner Inquiry Block ========mm
[microtek] 06 31 19 01 5b 00 00 00 4d 49 43 52 4f 54 45 4b
[microtek] 53 63 61 6e 4d 61 6b 65 72 20 33 35 74 2b 20 20
[microtek] 31 2e 34 30 53 43 53 49 20 46 2f 57 56 33 2e 34
[microtek] 20 43 54 4c 35 33 38 30 03 ef 8c c2 80 ec 62 23
[microtek] 01 03 23 01 00 83 00 01 0e 0e 01 05 00 00 00 00
[microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
[microtek] ========== Scanner Inquiry Report ==========
[microtek] ===== Scanner ID...
[microtek] Device Type Code: 0x06
[microtek] Model Code: 0x62
[microtek] Vendor Name: 'MICROTEK' Model Name: 'ScanMaker 35t+ '
[microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380'
[microtek] Firmware Rev: '1.40'
[microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.9
[microtek] Response data format: 0x01
[microtek] ===== Imaging Capabilities...
[microtek] Modes: Lineart Halftone Gray Color (X-msv) (OnePass)
(Negative)
[microtek] Resolution Step Sizes: 1% 5% Expanded Resolution
Support? yes
[microtek] Supported Bits Per Sample: 4 8
[microtek] Max. document size code: 0x80
[microtek] Max. document size: 2686 x 2686 pixels
[microtek] Frame units: pixels 1/8"'s
[microtek] # of built-in halftones: 12 Downloadable patterns? Yes
[microtek] Data Compression:
[microtek] Contrast Settings: 14 Exposure Settings: 14
[microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes
[microtek] Digital brightness/offset? yes
[microtek] Gamma Table Size: 1024 entries of 2 bytes (max. depth: 10)
[microtek] ===== Source Options...
[microtek] Feed type: edge-feed ADF support? no
[microtek] Document Feeder Support? yes Feeder Backtracking? yes
[microtek] Feeder Installed? no Feeder Ready? no
[microtek] Transparency Adapter Installed? no
[microtek] Fast Color Prescan? yes
[microtek] Selectable Transfer Format? no
[microtek] Color Transfer Sequence: line-by-line, non-sequential with
headers
[microtek] Three pass scan support? no
[microtek] ModeSelect-1 and ModeSense-1 Support? yes
[microtek] Can Disable Linearization Table? no
[microtek] Can Disable Start-of-Scan Recalibration? no
[microtek] Internal expanded expansion? no
[microtek] ====== End of Scanner Inquiry Report =======
[microtek] attach_scanner: happy.
[microtek] sane_init: config-> /dev/sg2
[microtek] attach_scanner: /dev/sg2
[microtek] sane_get_devices
[microtek] sane_open
[microtek] sane_open: find device...
[microtek] sane_open: create scanner...
[microtek] sane_open: initialize scanner dependent stuff...
[microtek] sane_open: All calibration routines disabled.
[microtek] sane_open: init gamma tables...
[microtek] sane_open: init pass-time variables...
[microtek] sane_open: init clever cache...
[microtek] sane_open: initialize options:
[microtek] init_options...
[microtek] init_options: quant yes
[microtek] init_options: done.
[microtek] sane_control_option (opt=0,act=0,val=0xbfd3078c,info=(nil))
[microtek] sane_control_option (opt=0,act=0,val=0xbfd27668,info=(nil))
[microtek] sane_get_option_descriptor (0)...
[microtek] sane_get_option_descriptor (1)...
[microtek] sane_get_option_descriptor (2)...
[microtek] sane_get_option_descriptor (3)...
[microtek] sane_get_option_descriptor (4)...
[microtek] sane_get_option_descriptor (5)...
[microtek] sane_get_option_descriptor (6)...
[microtek] sane_get_option_descriptor (7)...
[microtek] sane_get_option_descriptor (8)...
[microtek] sane_get_option_descriptor (9)...
[microtek] sane_get_option_descriptor (10)...
[microtek] sane_get_option_descriptor (11)...
[microtek] sane_get_option_descriptor (12)...
[microtek] sane_get_option_descriptor (13)...
[microtek] sane_get_option_descriptor (14)...
[microtek] sane_control_option (opt=14,act=0,val=0x8051684,info=(nil))
[microtek] sane_get_option_descriptor (15)...
[microtek] sane_control_option (opt=15,act=0,val=0x8051688,info=(nil))
[microtek] sane_get_option_descriptor (16)...
[microtek] sane_get_option_descriptor (17)...
[microtek] sane_get_option_descriptor (18)...
[microtek] sane_get_option_descriptor (19)...
[microtek] sane_get_option_descriptor (20)...
[microtek] sane_get_option_descriptor (21)...
[microtek] sane_get_option_descriptor (22)...
[microtek] sane_get_option_descriptor (23)...
[microtek] sane_get_option_descriptor (24)...
[microtek] sane_get_option_descriptor (25)...
[microtek] sane_get_option_descriptor (26)...
[microtek] sane_get_option_descriptor (27)...
[microtek] sane_get_option_descriptor (28)...
[microtek] sane_get_option_descriptor (29)...
[microtek] sane_get_option_descriptor (30)...
[microtek] sane_get_option_descriptor (31)...
[microtek] sane_get_option_descriptor (32)...
[microtek] sane_get_option_descriptor (33)...
[microtek] sane_control_option (opt=12,act=0,val=0xbfd27664,info=(nil))
[microtek] sane_control_option (opt=13,act=0,val=0xbfd27664,info=(nil))
[microtek] sane_control_option (opt=12,act=0,val=0xbfd30780,info=(nil))
[microtek] sane_get_option_descriptor (14)...
[microtek] sane_control_option
(opt=14,act=1,val=0xbfd30784,info=0xbfd27668)
[microtek] sane_control_option (opt=13,act=0,val=0xbfd30780,info=(nil))
[microtek] sane_get_option_descriptor (15)...
[microtek] sane_control_option
(opt=15,act=1,val=0xbfd30784,info=0xbfd27668)
[microtek] sane_start...
[microtek] sane_get_parameters...
[microtek] sane_get_parameters: regular 1-pass color
[microtek] sane_get_parameters: res_code = 5 ( 5)
[microtek] bright_r of 0 set to 0x0
[microtek] sane_get_parameters: dots_per_mm: 3.937008
[microtek] sane_get_parameters: units_per_mm: 76.771654
[microtek] WIDTHPIX: before exp: 136
[microtek] sane_get_parameters: lines: 137 ppl: 136 bpl: 408
[microtek] .wait_ready 5...
[microtek] finagle_precal...
[microtek] .scanning_frame...
[microtek] .scanning_frame: in- 0,0 2686,2686
[microtek] .scanning_frame: out- 0,0 2686,2686
[microtek] .accessory...
[microtek] .download_gamma...
[microtek] .download_gamma: 1024 entries of 2 bytes, max 255
[microtek] .download_gamma: by default
[microtek] end_scan...
scanimage: sane_start: Error during device I/O
[microtek] sane_cancel...
[microtek] end_scan...
[microtek] sane_close...
[microtek] sane_exit...
[microtek] sane_exit: MICROTEK says goodbye.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 186 bytes
Desc: This is a digitally signed message part
Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20060605/db41b821/PGP.pgp
More information about the sane-devel
mailing list