[sane-devel] Canon MP600R - Connection via LAN

[m. allan noah]

i really, really doubt this scanner speaks the sane network protocol.
this device is probably not supported by sane.

allan

On 4/17/07, Michael Brasse <michael.brasse at gmail.com> wrote:
> Hello everybody,
> Attempts to connect to the scanner of my new Canon MP600R via the
> network was not successful.
>
> If I manage I am happy to provide test reports etc.
>
> If that is not the right place to ask, please refer - otherwise I am
> happy for any ideas.
>
> The problem I have is:
> sandmann:/etc/sane.d # SANE_DEBUG_NET=128 scanimage -L
> [sanei_debug] Setting debug level of net to 128.
> [net] sane_init: authorize = 0x804d560, version_code = 0xbff301d8
> [net] sane_init: SANE net backend version 1.0.13 (AF-indep+IPv6) from
> sane-backends 1.0.18
> [net] sane_init: Client has little endian byte order
> [net] sane_init: searching for config file
> [net] sane_init: trying to add 192.168.0.2
> [net] add_device: adding backend 192.168.0.2
> [net] add_device: backend 192.168.0.2 added
> [net] sane_init: done reading config
> [net] sane_init: evaluating environment variable SANE_NET_HOSTS
> [net] sane_init: done
> [net] sane_get_devices: local_only = 0
> [net] connect_dev: trying to connect to 192.168.0.2
> [net] connect_dev: [0] failed to connect (Connection refused)
> [net] connect_dev: [1] failed to connect (Connection refused)
> [net] connect_dev: couldn't connect to host (see messages above)
> [net] sane_get_devices: ignoring failure to connect to 192.168.0.2
> [net] sane_get_devices: finished (0 devices)
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> [net] sane_exit: exiting
> [net] sane_exit: closing dev 0x8054f68, ctl=-1
> [net] sane_exit: finished.
>
> also:
> sandmann:/etc/sane.d # telnet 192.168.0.2 6566
> Trying 192.168.0.2...
> telnet: connect to address 192.168.0.2: Connection refused
>
> Printing works, ping works, the web-server of the device works, there
> is no firewall running on my machine - but scanning doesn't work.
>
> This is what I have configured (this is all I know):
>
> sandmann:/etc/sane.d # cat net.conf
> # This is the net config file.  Each line names a host to attach to.
> # If you list "localhost" then your backends can be accessed either
> # directly or through the net backend.  Going through the net backend
> # may be necessary to access devices that need special privileges.
> # localhost
> 192.168.0.2
>
> sandmann:/etc/sane.d # cat dll.conf
> # enable the next line if you want to allow access through the network:
> net
> #abaton
> #agfafocus
> #apple
> ...
>
> sandmann:/etc # cat services
> ...
> #               6559-6565  Unassigned
> sane-port       6566/tcp   # SANE Control Port
> sane-port       6566/udp   # SANE Control Port
> #               6567-6578  Unassigned
> affiliate       6579/tcp   # Affiliate
> ...
>
> The following versions of sane run on my machine (openSuse 10.2):
> mbrasse at sandmann:~> rpm -qa *sane*
> sane-backends-1.0.18-14
> sane-frontends-1.0.14-69
> python-imaging-sane-1.1.6-3
> xsane-0.994-8
>
> Also the latest mp150-0.13.0.tar.bz2 from
> http://home.arcor.de/wittawat/pixma/ is downloaded and installed (it
> should contain the latest patches from
> http://pixma-mp600.sourceforge.jp/ which are mentioned several times.
>
> Thanks for any hint.
>
> Best regards
>              Micha
>
>
> --
> ____________________________________
> Michael Brasse
> Kelliweg 26
> CH-8810 Zürich
>
> +41 44 381 4046
> +41 79 636 8960
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org
>


-- 
"The truth is an offense, but not a sin"