[sane-devel] sm3600

Richard Werst rbwerst at gmail.com
Sun Feb 11 00:27:35 CET 2007


This is what came up when I ran scanimage with the scanner connected	

>>>

[root at localhost rbw]# scanimage
[sanei_debug] Setting debug level of sm3600 to 5.
[sm3600] SM3600 init
[sm3600] SM3600 version: 1000006
[sm3600] found dev 05DA/40CA, libusb:001:003
[sm3600] opening libusb:001:003
[sm3600] libusb:001:003<>libusb:001:003
scanimage: rounded value of br-x from 50 to 49.9954
scanimage: rounded value of br-y from 80 to 79.9927
[sm3600] starting scan...
[sm3600] mode=0, res=75, BC=[0,0], xywh=[1039,1417,1323,2362]
[sm3600] DoOriginate()
[sm3600] lt1=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1
[sm3600] lt2=1

>>>>>


At this point I shut the scanner down.

It looks to me like it is not incrementing / moving the stepper
motor...but I am not sure if there is anything I can do to implement it.

It did not print anything to the log file however (I may have to the
file referred to in the man page but I am not sure where it is).

rbwerst at gmail.com




More information about the sane-devel mailing list