[sane-devel] Further progress on finding HP Scanjet 3200C

Adrian Walker walkad at internode.on.net
Thu Feb 15 09:26:26 CET 2007


Hello Stef,

As you suggested, here are results of ppdiag, first with EPP + ECP set:
        
        adrian at adrian-desktop:~$ sudo bash ppdiag
        Password:
        S01: parport built as module
         
        S02: parport0:
        S02:    modes:PCSPP,TRISTATE,COMPAT,ECP,DMA
        S02:    ADDR :0x378
        S02:    IRQ  :7
        S02:    DMA  :3
         
        S03: no parport parameters
         
        S10: ppdev built as module
         
        S12: /dev/parport0 exists ...
        S12: /dev/parport0 is readable ...
        S12: /dev/parport0 is writable ...
        S12: do you want to allow any user to access ppdev ? (yes/no)
        yes
        S12: mode changed ...
         
        successfull end ....

And here with EPP set:

        root at adrian-desktop:/home/adrian# bash ppdiag
        S01: parport built as module
        
        S02: parport0:
        S02:    modes:PCSPP,TRISTATE,EPP
        S02:    ADDR :0x378
        S02:    IRQ  :7
        S02:    DMA  :no DMA used
        
        S03: no parport parameters
        
        S10: ppdev built as module
        
        S12: /dev/parport0 exists ...
        S12: /dev/parport0 is readable ...
        S12: /dev/parport0 is writable ...
        S12: do you want to allow any user to access ppdev ? (yes/no)
        yes 
        S12: mode changed ...
        
        successfull end

But still can't find scanimage command:
        
        root at adrian-desktop:~#
        cat /proc/sys/dev/parport/parport0/devices/active
        none
        root at adrian-desktop:~# export SANE_DEBUG_UMAX_PP=255
        root at adrian-desktop:~# export SANE_DEBUG_UMAX_PP_LOW=255
        root at adrian-desktop:~# scanimage -L
        -bash: scanimage: command not found
        root at adrian-desktop:~# 
        
Nor can I run the umax_pp command:

        root at adrian-desktop:~# bash umax_pp
        bash: umax_pp: No such file or directory
        root at adrian-desktop:~# umax_pp
        -bash: umax_pp: command not found
        root at adrian-desktop:~# 
        
Not able to find parport kernel module in order to pass options:

        options parport_pc io=0x378 io_hi=0x778 irq=7 dma=auto

Not sure where to go from here.

Regards

Adrian
        




More information about the sane-devel mailing list