[sane-devel] Formulardaten

Gerard Klaver gerard at gkall.hobby.nl
Thu Jul 5 15:17:11 UTC 2007


On Thu, 2007-07-05 at 01:46 +0200, cgi-mailer at kundenserver.de wrote:
> 
> ===========================================
> == Neuer Eintrag
> ===========================================
> 
>       
> -------------------------------------------
> -- Formular: 'adddev'
> -------------------------------------------
> 
> 1. Your email address:
>    'ppradier at videotron.ca'
> 2. Manufacturer (e.g. "Mustek"):
>    'Microtek'
> 3. Model name (e.g. ScanExpress 1200UB):
>    'ScanMaker S400'
> 4. Bus type:
>    'USB'
> 5. Vendor id (e.g. 0x001):
>    '05da'
> 6. Product id (e.g. 0x0002):
>    '300b'
> 7. Chipset (e.g. lm9831):
>    'SQ113-A3, (2nd line: 0428-1505), (3rd line: D189Q-010) or NYnix 438U'
> 8. Comments (e.g. similar to Mustek 1234):
>    'If you provide me an FTP or Email address I could forward you close shots of the scanner's board.
> 
> The board as 2 main chips, I am not sure wich one is the chipset. The larger one as bus connector on the 4 sides shows SQ113-A3 the smaller of the 2 as bus connector on 2 sides only as the marking NYnyx 438U (2nd line: HY57V161610ET-7).
> 
> Hoping that this is helpfull.
> 
> Thank you'
> 9. Data (e.g. sane-find-scanner -v -v):
>    'cat /proc/bus/usb/devices :
> 
> T:  Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=05da ProdID=300b Rev= 1.00
> S:  Manufacturer=Prolific Technology Inc.
> S:  Product=USB Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us
> '
> 
> 

did you check the mustek_usb2 backend? (SQ113 support)
For information see
(http://www.meier-geinitz.de/sane/mustek_usb2-backend/

Maybe with some patches your scanner is identified, for a working
scanner i expect more patches are needed and you should be carefull not
to damage your scanner.
-- 
--------
m.vr.gr.
Gerard Klaver





More information about the sane-devel mailing list