[sane-devel] lexmark X1150

Fred Odendaal freshshelf at rogers.com
Sun Mar 18 23:09:54 CET 2007


Probably a permissions thing. I experienced a similar thing when 
upgrading to FC6. If you can see your scanner as root then for sure that 
is what the problem is. The workaround is to add a group called 
"scanner" and add the group to the users who want to scan. Then you can 
scan as a regular user.

Note, the lexmark backend is incomplete. It lacks colour calibration and 
darkness compensation (amongst other things :-) ). There is a fellow 
named Stephan Voltz, who has created an experimental backend and he is 
trying to add these things.

regards,
Fred O.

Mark Fonnemann wrote:
> Hello-
>
> i'm trying to get my lexmark x1150 to scan but when i use scanimage i get the
> following error message "scanimage: no SANE devices found". i'm using the
> latest sane-libs package from FC6 i.e. "xsane-0.991-4.fc6". any suggestions on
> how to make this work? here's the debug output from /proc/bus/usb/devices:
>
> T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
> B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.20-1.2925.fc6 ehci_hcd
> S:  Product=EHCI Host Controller
> S:  SerialNumber=0000:00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
>
> T:  Bus=05 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=13fe ProdID=1a00 Rev= 1.00
> S:  Manufacturer=        
> S:  Product=USB DISK 28X    
> S:  SerialNumber=076411943A90
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc= 93/900 us (10%), #Int=  1, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.20-1.2925.fc6 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.3
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=045e ProdID=0040 Rev= 3.00
> S:  Manufacturer=Microsoft
> S:  Product=Microsoft 3-Button Mouse with IntelliEye(TM)
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
>
> T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.20-1.2925.fc6 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.2
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc= 11/900 us ( 1%), #Int=  1, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.20-1.2925.fc6 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.1
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 2
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=043d ProdID=007a Rev= 1.00
> S:  Manufacturer=Lexmark
> S:  Product=USB Hub
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  8mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
>
> T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=043d ProdID=007c Rev= 1.00
> S:  Manufacturer=Lexmark
> S:  Product=X1100 Series
> S:  SerialNumber=7046095
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=250ms
>
> T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=043d ProdID=007b Rev= 1.00
> S:  Manufacturer=Lexmark 
> S:  Product=Lexmark X1100 Series
> S:  SerialNumber=7046095
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  4mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
> E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  16 Ivl=0ms
>
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.20-1.2925.fc6 uhci_hcd
> S:  Product=UHCI Host Controller
> S:  SerialNumber=0000:00:1d.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> thanks in advance...
> mark.
>
>
>
>
>  
> ____________________________________________________________________________________
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> http://answers.yahoo.com/dir/?link=list&sid=396546091
>
>   




More information about the sane-devel mailing list