[sane-devel] Formulardaten

cgi-mailer at kundenserver.de cgi-mailer at kundenserver.de
Thu Sep 6 04:28:09 UTC 2007



===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'Marvin.Stodolsky at gmail.com'
2. Manufacturer (e.g. "Mustek"):
   'Hewlett Packard'
3. Model name (e.g. ScanExpress 1200UB):
   'scanjet 4470c'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x03f0'
6. Product id (e.g. 0x0002):
   '0x0805'
7. Chipset (e.g. lm9831):
   ''
8. Comments (e.g. similar to Mustek 1234):
   'Also designated  Model 9880A #AC3'
9. Data (e.g. sane-find-scanner -v -v):
   'T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=0805 Rev= 1.00
S:  Manufacturer=Hewlett-Packard
S:  Product=HP ScanJet 4470c
S:  SerialNumber=CN1AYAE0FTZ
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=250ms


<device descriptor of 0x03f0/0x0805 at 001:002>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x03F0
idProduct             0x0805
bcdDevice             1.00
iManufacturer         4 ((null))
iProduct              3 ((null))
iSerialNumber         5 ((null))
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       6 ((null))
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             0 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    0
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         7 ((null))
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    8
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    8
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         250 ms
    bRefresh          0
    bSynchAddress     0
  
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18)>

negative results not copied in.
Will open case to look at chipset next week,


'




More information about the sane-devel mailing list