[sane-devel] sane-epkowa backend for EPSON V500

nbi at wideopenwest.com nbi at wideopenwest.com
Sun Apr 20 21:44:14 UTC 2008


As requested in the man page I'm reporting status.

The current backend (EPKOWA SANE Backend 2.11.0 - 2008-02-07) which can 
be downloaded from AVASYS 
(http://avasys.jp/hp/menu000000500/hpg000000442.htm) does *not* enable 
successful scanning for the EPSON V500 under Debian etch with kernel 
2.6.24.4. I have attempted installation both via alien and by building 
from source. In both cases installation was successful but the software 
fails at runtime. The os, 'lsusb', and 'sane-find-scanner' all correctly 
detect the V500. However, 'scanimage' and 'iscan' fail. With debugging 
enabled iscan fails as follows:

-----------------------------------------------------------------------------------------------------------------------
iscan
[sanei_debug] Setting debug level of epkowa to 128.
[epkowa] sane_init: iscan 2.11.0
[sanei_debug] Setting debug level of sanei_usb to 128.
[sanei_usb] sanei_usb_init: HAVE_LIBUSB
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 002
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 002 on 001
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0130) 
interface 0  at libusb:001:003
[sanei_usb] sanei_usb_init: device 0x1058/0x0903, interface 0 doesn't 
look like a scanner (0/8)
[sanei_usb] sanei_usb_init: device 0x1058/0x0903, interface 1 doesn't 
look like a scanner (0/3)
[sanei_usb] sanei_usb_init: device 0x1058/0x0903: no suitable interfaces
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[epkowa] sane_init, ># epkowa.conf -- sample configuration for the 
EPKOWA SANE backend<
[epkowa] sane_init, ># Copyright (C) 2004  Olaf Meeuwissen<
[epkowa] sane_init, >#<
[epkowa] sane_init, ># See sane-epkowa(5), sane-scsi(5) and sane-usb(5) 
for details.<
[epkowa] sane_init, ><
[epkowa] sane_init, ># SCSI scanners can be configured simply by listing 
the path to the<
[epkowa] sane_init, ># device.  For example, if your system claims to 
have a /dev/scanner<
[epkowa] sane_init, ># SCSI device, all you have to do is uncomment the 
following line:<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#/dev/scanner<
[epkowa] sane_init, >#<
[epkowa] sane_init, ># In the interest of maintainability, most 
installations would have<
[epkowa] sane_init, ># /dev/scanner sym-linked to the real SCSI scanner 
device node.<
[epkowa] sane_init, >#<
[epkowa] sane_init, ># An alternative way that works for many operating 
systems and is a<
[epkowa] sane_init, ># little bit more generic, is to have the backend 
probe for your SCSI<
[epkowa] sane_init, ># scanner with the following configuration command:<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#scsi EPSON<
[epkowa] sane_init, ><
[epkowa] sane_init, ># On systems with libusb, the following line is 
sufficient to get the<
[epkowa] sane_init, ># backend to recognise your USB scanners.  It 
presumes, however, that<
[epkowa] sane_init, ># the scanner---more precisely, it's USB product 
ID---is known to the<
[epkowa] sane_init, ># backend.<
[epkowa] sane_init, ># For all USB scanners that are officially 
supported by this backend,<
[epkowa] sane_init, ># this presumption is true.  A list of such 
scanners can be found in<
[epkowa] sane_init, ># sane-epkowa(5).<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#usb<
[epkowa] sane_init, ><
[epkowa] sane_init, ># For any USB scanner not known to the backend 
(yet), you may, at your<
[epkowa] sane_init, ># own peril(!!), force the backend to recognise and 
use it via libusb.<
[epkowa] sane_init, ># You can do so by the following configuration 
command:<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#   usb <USB vendor ID> <USB product ID><
[epkowa] sane_init, >#<
[epkowa] sane_init, ># SEIKO EPSON's USB vendor ID is '0x04b8' (without 
quotes).  In order<
[epkowa] sane_init, ># to find the USB product ID, use lsusb(1) or, on 
Linux systems, peek<
[epkowa] sane_init, ># at the information in /proc/bus/usb/devices.<
[epkowa] sane_init, ># A sample configuration for the Perfection 1650 
(GT-8200), which has<
[epkowa] sane_init, ># a product ID of 0x0110, would look as follows:<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#usb 0x04b8 0x0110<
[epkowa] sane_init, >usb 0x04b8 0x0130<
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0130
[epkowa] attach_one_usb(libusb:001:003)
[epkowa] EPKOWA SANE Backend 2.11.0 - 2008-02-07
[epkowa] attach(libusb:001:003, 3)
[epkowa] attach: opening libusb:001:003
[sanei_usb] sanei_usb_open: trying to open device `libusb:001:003'
[sanei_usb] could not get bound driver: No data available[sanei_usb] 
sanei_usb_open: found bulk-in endpoint (address 1)
[sanei_usb] sanei_usb_open: found bulk-out endpoint (address 2)
[sanei_usb] sanei_usb_open: opened usb device `libusb:001:003' (*dn=0)
[sanei_usb] sanei_usb_get_vendor_product: device 0: vendorID: 0x04b8, 
productID: 0x0130
[sanei_usb] sanei_usb_close: closing device 0
[epkowa] sane_init, ><
[epkowa] sane_init, ># When not accessing your USB scanner via libusb, 
you may need to use<
[epkowa] sane_init, ># one of the configuration commands below or 
commands that are almost<
[epkowa] sane_init, ># the same.  These commands typically access the 
scanner via a kernel<
[epkowa] sane_init, ># scanner module.<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#usb /dev/usb/scanner0<
[epkowa] sane_init, >#usb /dev/usbscanner0<
[epkowa] sane_init, >#usb /dev/uscanner0<
[epkowa] sane_init, >#<
[epkowa] sane_init, ># Linux had a scanner module until version 2.6.2.  
As of version 2.6.3<
[epkowa] sane_init, ># libusb is your only option.  Linux' scanner 
module can be loaded via<
[epkowa] sane_init, ># the modprobe(8) command like so:<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#   modprobe scanner vendor=<USB vendor ID> 
product=<USB product ID><
[epkowa] sane_init, >#<
[epkowa] sane_init, ># If the scanner module already knows the vendor 
and product IDs, you<
[epkowa] sane_init, ># do not have to specify them.  If you want to have 
this done automa-<
[epkowa] sane_init, ># tically every time you boot, you can add the 
above line, except for<
[epkowa] sane_init, ># the modprobe command itself, to your /etc/modules 
file.<
[epkowa] sane_init, ><
[epkowa] sane_init, ># Although not tested with this backend, parallel 
port scanners should<
[epkowa] sane_init, ># be usable.  You can configure them as shown 
below, but I do not know<
[epkowa] sane_init, ># much about the details.  Information is welcome.<
[epkowa] sane_init, >#<
[epkowa] sane_init, >#pio 0x278<
[epkowa] sane_init, >#pio 0x378<
[epkowa] sane_init, >#pio 0x3BC<
[epkowa] sane_get_devices()
-----------------------------------------------------------------------------------------------------------------------
The critical point seems to be at "[sanei_usb] could not get bound 
driver". I don't have the usb expertise to know what that means without 
doing further research. Any help would be greatly appreciated.
Thanks.




More information about the sane-devel mailing list