[sane-devel] Cross compilation on Moxa embedded device
janc at liquidauto.co.za
Fri Apr 25 07:19:56 UTC 2008
I wish to cross compile "sane" to run on a Moxa W345 embedded device.
I have done the following:
1.) Download the "sane" source code for both the backend and
2.) Installed the Moxa tool chain on my Slackware based PC.
3.) Looked at the sane project's make files.
As I see it the step forward is to modify the makefiles to use the Moxa
After this I should be able to copy the relevant files over to the Moxa
The problem is that this makefiles are complicated and my experience
level in setting such files up are low.
What I need to know is:
1.) Is there somebody that has done this, that can give me some
pointers to how the process should work.
2.) Can anybody give me any idea how to modify the makefiles.
(Setting up the cross compiler? What else?)
Thanks In advance
Liquid Automation Systems, LAS Cool Sorption and LAS Garage Equipment disclaim all liability for any loss, damage or expense however caused,
arising from the sending, receipt or use of this e-mail communication and on any reliance placed upon the information provided through this
service and does not guarantee the completeness or accuracy of the information.
This message may contain information which is confidential and subject to legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received this message in error, please notify the sender immediately by e-mail,
facsimile or telephone and return and / or destroy the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the sane-devel