[sane-devel] Sane and Canon MF 4122
ashyanbhog at gmail.com
Sun Dec 28 10:03:37 UTC 2008
I've a Canon Multi Function 4122 , it is actually Canon MF 4150
without the Fax / Phone function. Sane identifies a USB scanner
attached to the machine, but fails to configure it. Output of lsusb
and sane-find-scanner is attached. Is there anyway to get it working
in Sane or is support for this model planned in near future?
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9, product=0x26a3) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 002: ID 04a9:26a3 Canon, Inc.
Bus 002 Device 001: ID 1d6b:0002
Bus 001 Device 001: ID 1d6b:0001
More information about the sane-devel