[sane-devel] Formulardaten
cgi-mailer at kundenserver.de
cgi-mailer at kundenserver.de
Sun Jan 27 11:04:42 UTC 2008
===========================================
== Neuer Eintrag
===========================================
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------
1. Your email address:
'alistair at penguinmail.com'
2. Manufacturer (e.g. "Mustek"):
'Hewlett Packard'
3. Model name (e.g. ScanExpress 1200UB):
'scanjet 4470c'
4. Bus type:
'USB'
5. Vendor id (e.g. 0x001):
' Vendor=03f0 '
6. Product id (e.g. 0x0002):
'ProdID=0805 Rev= 1.00'
7. Chipset (e.g. lm9831):
''
8. Comments (e.g. similar to Mustek 1234):
'xsane will recognise scanner and seem to perform preview scan, normal scan and so on, but the output is just a black page.
I am using Ubuntu Gutsy Gibbon updated to today's version (27.01.2008). Xsane is version 0.991.
When I try and set configurations in xsane I get "permission denied" types of messages. This happens actually even when I just close xsane.'
9. Data (e.g. sane-find-scanner -v -v):
'$ scanimage -L
device `hp_rts88xx:libusb:002:004' is a Hewlett-Packard ScanJet 4470C flatbed scanner
$cat /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.22-14-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0d7d ProdID=1600 Rev= 1.00
S: Manufacturer=Acer
S: Product=Flash Disk
S: SerialNumber=48541D000264
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0805 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=HP ScanJet 4470c
S: SerialNumber=CN24GAD059Z
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=043d ProdID=0078 Rev= 1.00
S: Manufacturer=Lexmark
S: Product=Lexmark Z600 Series
S: SerialNumber=18K670127073950
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.22-14-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
$ sudo sane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.18-cvs
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
<device descriptor of 0x0d7d/0x1600 at 005:003 (Acer Flash Disk )>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0D7D
idProduct 0x1600
bcdDevice 1.00
iManufacturer 1 (Acer )
iProduct 2 (Flash Disk )
iSerialNumber 3 (48541D000264)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 128 ()
MaxPower 200 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8
bInterfaceSubClass 6
bInterfaceProtocol 80
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 64
bInterval 4 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 005:001 (Linux 2.6.22-14-generic ehci_hcd EHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.22-14-generic ehci_hcd)
iProduct 2 (EHCI Host Controller)
iSerialNumber 1 (0000:00:1d.7)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 12 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x03f0/0x0805 at 002:004>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x03F0
idProduct 0x0805
bcdDevice 1.00
iManufacturer 4 ((null))
iProduct 3 ((null))
iSerialNumber 5 ((null))
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ((null))
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 7 ((null))
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 8
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 250 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
checking for MA-1017 ...
this is not a MA-1017 (bcdUSB = 0x110)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x110)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822L-01H ...
this is not a RTS8822L-01H (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for rts8858c ...
Unexpected result from register reading (0x20/0xf8)
checking for SQ113 ...
this is not a SQ113 (bcdUSB = 0x110)
checking for HP5550/5590/7650 chipset ...
this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18-cvs)>
found USB scanner (vendor=0x03f0, product=0x0805) at libusb:002:004
<device descriptor of 0x043d/0x0078 at 002:003 (Lexmark Lexmark Z600 Series)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x043D
idProduct 0x0078
bcdDevice 1.00
iManufacturer 1 (Lexmark )
iProduct 2 (Lexmark Z600 Series)
iSerialNumber 3 (18K670127073950)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 4 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 (out 0x05)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 16
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.22-14-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.1)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.22-14-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.0)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.22-14-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.2)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 004:001 (Linux 2.6.22-14-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.22-14-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.3)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
done
'
More information about the sane-devel
mailing list