[sane-devel] Problem: X-Server crashes when using XSane

["Christoph M. Schröder"]

Hi,

thanks Oliver.

This is what i'm getting showed in the terminal:
$ SANE_DEBUG_SNAPSCAN=255 xsane 2>debug.log
User defined signal 1
$

And here you can find what appeared today in var/log/debug:
http://home.mnet-online.de/hta/debug.txt

Christoph



Oliver Schwartz schrieb:
> Hi,
>
> please also provide the log produced by
> SANE_DEBUG_SNAPSCAN=255 xsane 2 > debug.log
>
> then use xsane until the error occurs. The logs tend to get quite big, 
> so you should compress it.
>
> Regards,
>
> Oliver
>
> On 21.06.2008, at 17:46, Christoph M. Schröder wrote:
>
>> Hi,
>>
>> thanks for the information. My fault.
>>
>> You can now find them here:
>> http://home.mnet-online.de/hta/syslog.txt
>> http://home.mnet-online.de/hta/messages.txt
>>
>> Christoph
>>
>> Julien BLACHE schrieb:
>>> "Christoph M. Schröder" <cmschroeder at maxi-dsl.de> wrote:
>>>
>>> Hi,
>>>
>>>
>>>> i wrote, i sometimes also get this "Failed to start scanner: error
>>>> during device I/O" message. And in the sane-project.org FAQ is written
>>>> to connect the mailing list, if an error like this appears.
>>>>
>>>> I'd really be happy if i could solve this problem...
>>>>
>>>
>
>