[sane-devel] Problems setting up Mustek 600 III EP Plus in Xubuntu

[Juan Carlos García]

Thanks, Eddy.

Still didn't find it. Please see attached.

On Sat, May 17, 2008 at 4:47 AM, Eddy De Greef <edg-sane at edpnet.be> wrote:

> Hi Juan Carlos,
>
> now it looks like the ppdev module is no longer loaded. Can you try this
> again (both as root):
>
>   modprobe ppdev
>   SANE_DEBUG_SANEI_PA4S2=128 LIBIEEE1284_DEBUG=128 scanimage -L
>
> (Make sure that you still have /etc/ieee1284.conf.)
>
> Best regards,
>
> Eddy
>
> Juan Carlos García wrote:
> > Thanks, Eddy.
> >
> > Synaptic reports I have libieee1284-3 installed (version 0.2.11-3). I
> tried
> > with /etc/ieee1284.conf and still didn't work, but now it could "attach"
> to
> > partport0 even though it couldn't "initialize" it:
> >
> > juancarlos at cm-xubuntu:/$ SANE_DEBUG_SANEI_PA4S2=128 scanimage -L
> > [sanei_debug] Setting debug level of sanei_pa4s2 to 128.
> > [sanei_pa4s2] sanei_pa4s2: interface called for the first time
> > [sanei_pa4s2] sanei_pa4s2_devices: invoked
> > [sanei_pa4s2] pa4s2_init: static int first_time = 1
> > [sanei_pa4s2] pa4s2_init: called for the first time
> > [sanei_pa4s2] pa4s2_init: initializing libieee1284
> > [sanei_pa4s2] pa4s2_init: 1 ports reported by IEEE 1284 library
> > [sanei_pa4s2] pa4s2_init: port 0 is `parport0`
> > [sanei_pa4s2] pa4s2_init: allocating port list
> > [sanei_pa4s2] pa4s2_init: initialized successfully
> > [sanei_pa4s2] sanei_pa4s2_open: called for device 'parport0'
> > [sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
> > [sanei_pa4s2] pa4s2_open: trying to attach dev `parport0`
> > [sanei_pa4s2] pa4s2_init: static int first_time = 0
> > [sanei_pa4s2] pa4s2_init: sanei already initalized
> > [sanei_pa4s2] pa4s2_open: looking up port in list
> > [sanei_pa4s2] pa4s2_open: port is in list at port[0]
> > [sanei_pa4s2] pa4s2_open: setting up port data
> > [sanei_pa4s2] pa4s2_open: name=parport0 in_use=SANE_TRUE
> > [sanei_pa4s2] pa4s2_open: enabled=SANE_FALSE mode=PA4S2_MODE_NIB
> > [sanei_pa4s2] pa4s2_open: opening device
> > [sanei_pa4s2] pa4s2_open: could not open device `parport0` (Error
> > initializing port)
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
Juan Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080517/1b0e258b/attachment-0001.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: scanimage results.txt
Url: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080517/1b0e258b/attachment-0001.txt