[sane-devel] multifuncional HP Deskjet F2180

[Janeks Kamerovskis]

Hi!

I succesfuly compiled and installed Sane backends on nice small Linux 
machine Bubba. That is personal mini server without any connectors for 
monitor, keyboard and mouse. The only access is trought SSH or web 
interfaces. Contains some good sevices like media server, ftp, print server, 
samba etc.
I have managed to work on them my HP Deskjet F2180 multifuncional printer.
But of course I would like to use his scanning abilities too - i.e. use it 
like network scanner.

So where I am now:

scanimage -L
gives me "No scanners were identified..."

while
sane-find-scanner
gives:
found USB scanner (vendor=0x03f0 [HP], product=0x7d04 [Deskjet F2100 
series]) at libusb:001:010

cat /proc/bus/usb/devices
shows:
T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=7d04 Rev= 1.00
S:  Manufacturer=HP
S:  Product=Deskjet F2100 series
S:  SerialNumber=CN7954Q1SN04TK
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=cc Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=03(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:  If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=d4 Prot=00 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

but
cat /proc/bus/usb/drivers
no such file or directory

Thanks in advance!
brgds
Janeks