[sane-devel] HP 2400c - genesys - failure/success

[stef]

Le Thursday 04 September 2008 18:34:28 Tof, vous avez écrit :
> Hi,
>
> [genesys] WARNING: Your scanner is not fully supported or at least
> [genesys]          had only limited testing. Please be careful and
> [genesys]          report any failure/success to
> [genesys]          sane-devel at lists.alioth.debian.org. Please provide as
> many
> [genesys]          details as possible, e.g. the exact name of your
> [genesys]          scanner and what does (not) work.
>
> ..So, I uncommented the device in the genesys.conf file, it allowed the
> scanner to be recognized (can be tested via the scanimage -L command (it
> was already recognized by sane-find-scanner)).
>
> When trying to scan any image, I'm getting a half black, half white,
> vertically splitted image, which is nice at first but not quite what I
> expected :)
>
> It would have been a good start, if genesys backend's development wasn't
> stopped :(
>
> fox

	Hello

	hp2400 development isn't stopped. I'm currently working -slowly- to add 600 
dpi color scan support to the G2410 (based on usb logs sent by Robert 
Morton), which is a repackaged HP2400. Currently my main hurdle is to build 
slope tables for the motor. I think I'll have something to test during this 
month. But since I don't have such hardware to test, things will take some 
time.

Regards,
	Stef