[sane-devel] HP 2400c - genesys - failure/success

Robert John Morton rob at robmorton.20m.com
Fri Sep 5 16:41:29 UTC 2008


stef wrote:
> Le Thursday 04 September 2008 18:34:28 Tof, vous avez écrit :
>   
>> Hi,
>>
>> [genesys] WARNING: Your scanner is not fully supported or at least
>> [genesys]          had only limited testing. Please be careful and
>> [genesys]          report any failure/success to
>> [genesys]          sane-devel at lists.alioth.debian.org. Please provide as
>> many
>> [genesys]          details as possible, e.g. the exact name of your
>> [genesys]          scanner and what does (not) work.
>>
>> ..So, I uncommented the device in the genesys.conf file, it allowed the
>> scanner to be recognized (can be tested via the scanimage -L command (it
>> was already recognized by sane-find-scanner)).
>>
>> When trying to scan any image, I'm getting a half black, half white,
>> vertically splitted image, which is nice at first but not quite what I
>> expected :)
>>
>> It would have been a good start, if genesys backend's development wasn't
>> stopped :(
>>
>> fox
>>     
>
> 	Hello
>
> 	hp2400 development isn't stopped. I'm currently working -slowly- to add 600 
> dpi color scan support to the G2410 (based on usb logs sent by Robert 
> Morton), which is a repackaged HP2400. Currently my main hurdle is to build 
> slope tables for the motor. I think I'll have something to test during this 
> month. But since I don't have such hardware to test, things will take some 
> time.
>
> Regards,
> 	Stef
>
>   
Hello Stef
If you need me to test anything on the G2410 (HP2400c) hardware, please 
send me a script to run and I will send you the results.
Regards, Rob




More information about the sane-devel mailing list