[sane-devel] Plustek OpticSlim 2400 problem

stef stef.dev at free.fr
Mon Dec 21 06:17:30 UTC 2009

Le dimanche 20 décembre 2009 22:59:37 Eggert Ehmke (FTV), vous avez écrit :
> Hello,
> I try to install a Plustek OpticSlim 2400+ scanner at a ADM64 Gentoo Linux
> system.
> $ scanimage -L
> device `gt68xx:libusb:001:007' is a Plustek OpticSlim 2400 flatbed scanner
> However,
> $ sane-find-scanner -q
> found USB scanner (vendor=0x07b3, product=0x0454 [Genius CP-Slim 1200],
> chip=GT-6816) at libusb:001:007
> When I scan some images using xsane or via scanimage, the result is a
>  random gray pixel image. These are the outputs of the command:
> $ scanimage -v --device-name gt68xx:libusb:001:007 --resolution 300
>  --format tiff > image.tiff
> [gt68xx] WARNING: You have manually added the ids of your scanner
> [gt68xx]          to gt68xx.conf. Please use an appropriate override
> [gt68xx]          for your scanner. Use extreme care and switch off
> [gt68xx]          the scanner immediately if you hear unusual noise.
> [gt68xx]          Please report any success to
> [gt68xx]          sane-devel at lists.alioth.debian.org. Please provide as
>  many [gt68xx]          details as possible, e.g. the exact name of your
>  [gt68xx]          scanner, ids, settings etc.
> [gt68xx] gt68xx_afe_cis_auto: setting exposure reached limit
> scanimage: scanning image of size 2563x3531 pixels at 8 bits/pixel
> scanimage: acquiring gray frame
> scanimage: min/max graylevel value = 6/255
> scanimage: read 9049953 bytes in total
> What may be wrong?
> Regards
> Eggert


	what values did you provide in gt68xx.conf ? In a recent success report by 
Jarosław Arlet (http://lists.alioth.debian.org/pipermail/sane-devel/2009-
November/025607.html) was using:

usb 0x07b3 0x0454
vendor "Plustek"
model "OpticSlim 2400+"
firmware "/usr/share/sane/gt68xx/cis3R5B1.fw"
override "plustek-opticslim-2400"

	What you see might be due to overriding with an inappropriate model.


More information about the sane-devel mailing list