[sane-devel] HP Scanjet G 2710

m. allan noah kitno455 at gmail.com
Sun Feb 22 17:51:08 UTC 2009


it is supported, upgrade to sane cvs.

http://www.sane-project.org/lists/sane-backends-cvs.html#S-HP3900

allan

On Sun, Feb 22, 2009 at 11:50 AM, Peter Hoyer <peter.hoyer at gmx.de> wrote:
> I would appreciate the support of the hp scanjet G 2710 by the sane project
> and enclose the following output of the sane-find-scanner:
>
> kind regards
>
> Peter
>
> cat /proc/bus/usb/devices find nothing
>
> This is sane-find-scanner from sane-backends 1.0.19
>
>  # sane-find-scanner will now attempt to detect your scanner. If the
>  # result is different from what you expected, first make sure your
>  # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Invalid argument)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Invalid argument)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
>  # No SCSI scanners found. If you expected something different, make sure
> that
>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x03f0/0x2805 at 005:006 (hewlett packard hp scanjet)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x03F0
> idProduct             0x2805
> bcdDevice             1.00
> iManufacturer         1 (hewlett packard)
> iProduct              2 (hp scanjet)
> iSerialNumber         3 (CN78GA539F0530)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         39
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       4 (USB SCANNER)
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             2 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      3
>   bInterfaceClass    255
>   bInterfaceSubClass 0
>   bInterfaceProtocol 255
>   iInterface         5 (Bulk-In, Bulk-Out, Interrupt Interface)
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x02 (out 0x02)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 2>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x83 (in 0x03)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    1
>    bInterval         12 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <trying to find out which USB chip is used>
>    checking for GT-6801 ...
>    this is not a GT-6801 (bDeviceClass = 0)
>    checking for GT-6816 ...
>    this is not a GT-6816 (bcdUSB = 0x200)
>    checking for GT-8911 ...
>    this is not a GT-8911 (check 2, bcdUSB = 0x200)
>    checking for MA-1017 ...
>    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for MA-1015 ...
>    this is not a MA-1015 (bDeviceClass = 0)
>    checking for MA-1509 ...
>    this is not a MA-1509 (bDeviceClass = 0)
>    checking for LM983[1,2,3] ...
>    this is not a LM983x (bcdUSB = 0x200)
>    checking for GL646 ...
>    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL646_HP ...
>    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL660+GL646 ...
>    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL84x ...
>    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for ICM532B ...
>    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>    checking for PV8630/LM9830 ...
>    this is not a PV8630/LM9830 (bcdUSB = 0x200)
>    checking for M011 ...
>    this is not a M011 (bDeviceClass = 0)
>    checking for RTS8822 ...
> <This USB chip looks like a RTS8822 (result from sane-backends 1.0.19)>
>
> found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2805 [hp
> scanjet], chip=RTS8822) at libusb:005:006
>
> <device descriptor of 0x18a5/0x0214 at 005:004 (Verbatim Portable USB Drive)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x18A5
> idProduct             0x0214
> bcdDevice             1.03
> iManufacturer         2 (Verbatim)
> iProduct              3 (Portable USB Drive)
> iSerialNumber         1 (683000003Ef4)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         32
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       4 (Bulk Only Configuration)
>  bmAttributes         192 (Self-powered)
>  MaxPower             2 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      2
>   bInterfaceClass    8
>   bInterfaceSubClass 6
>   bInterfaceProtocol 80
>   iInterface         5 (Bulk Only Interface)
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x02 (out 0x02)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x05e3/0x070e at 005:005 (USB Storage)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x05E3
> idProduct             0x070E
> bcdDevice             150.02
> iManufacturer         0 ()
> iProduct              1 (USB Storage)
> iSerialNumber         2 (000000009602)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         32
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         128 ()
>  MaxPower             500 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      2
>   bInterfaceClass    8
>   bInterfaceSubClass 6
>   bInterfaceProtocol 80
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x02 (out 0x02)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x05e3/0x0608 at 005:003 (USB2.0 Hub)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       1
> bMaxPacketSize0       64
> idVendor              0x05E3
> idProduct             0x0608
> bcdDevice             7.02
> iManufacturer         0 ()
> iProduct              1 (USB2.0 Hub)
> iSerialNumber         0 ()
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             100 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    1
>    bInterval         12 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0002 at 005:001 (Linux 2.6.27.7-9-default
> ehci_hcd EHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0002
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27.7-9-default ehci_hcd)
> iProduct              2 (EHCI Host Controller)
> iSerialNumber         1 (0000:00:0b.2)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    4
>    bInterval         12 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 004:001 (Linux 2.6.27.7-9-default
> uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27.7-9-default uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:04.3)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.27.7-9-default
> uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27.7-9-default uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:04.2)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x050d/0x0121 at 001:003 (ADMtek USB To LAN Converter)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       8
> idVendor              0x050D
> idProduct             0x0121
> bcdDevice             1.01
> iManufacturer         1 (ADMtek)
> iProduct              2 (USB To LAN Converter)
> iSerialNumber         3 (0001)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         39
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         160 (Remote Wakeup)
>  MaxPower             160 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      3
>   bInterfaceClass    0
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    64
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x02 (out 0x02)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    64
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 2>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x83 (in 0x03)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    8
>    bInterval         128 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <trying to find out which USB chip is used>
>    checking for GT-6801 ...
>    this is not a GT-6801 (bDeviceClass = 0)
>    checking for GT-6816 ...
>    this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for GT-8911 ...
>    this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
>    checking for MA-1017 ...
>    this is not a MA-1017 (bcdUSB = 0x110)
>    checking for MA-1015 ...
>    this is not a MA-1015 (bDeviceClass = 0)
>    checking for MA-1509 ...
>    this is not a MA-1509 (bDeviceClass = 0)
>    checking for LM983[1,2,3] ...
>    this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for GL646 ...
>    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for GL646_HP ...
>    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for GL660+GL646 ...
>    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for GL84x ...
>    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
>    checking for ICM532B ...
>    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
>    checking for PV8630/LM9830 ...
>    this is not a PV8630/LM9830 (bcdUSB = 0x110)
>    checking for M011 ...
>    this is not a M011 (bDeviceClass = 0)
>    checking for RTS8822 ...
>    this is not a RTS8822 (bEndpointAddress = 0x81, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
>    checking for rts8858c ...
>    this is not a rts8858c (bEndpointAddress = 0x2, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
>    checking for SQ113 ...
>    this is not a SQ113 (bcdUSB = 0x110)
>    checking for HP5550/5590/7650 chipset ...
>    this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>    checking for rts8801/rts8891 ...
>    this is not a rts8801/rts8891 (bEndpointAddress = 0x2, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.19)>
>
> found USB scanner (vendor=0x050d [ADMtek], product=0x0121 [USB To LAN
> Converter]) at libusb:001:003
>
> <device descriptor of 0x1d6b/0x0001 at 001:001 (Linux 2.6.27.7-9-default
> ohci_hcd OHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27.7-9-default ohci_hcd)
> iProduct              2 (OHCI Host Controller)
> iSerialNumber         1 (0000:00:0b.0)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.27.7-9-default
> ohci_hcd OHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27.7-9-default ohci_hcd)
> iProduct              2 (OHCI Host Controller)
> iSerialNumber         1 (0000:00:0b.1)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>  # Your USB scanner was (probably) detected. It may or may not be supported
> by
>  # SANE. Try scanimage -L and read the backend's manpage.
>
>  # Not checking for parallel port scanners.
>
>  # Most Scanners connected to the parallel port or other proprietary ports
>  # can't be detected by this program.
> done
>
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"



More information about the sane-devel mailing list