[sane-devel] Getting Epson stylus CX5000 scanner working

tj 999alfred at comcast.net
Wed Apr 21 01:58:48 UTC 2010


here is the output of

SANE_DEBUG_EPSON2=255 scanimage -L 2>cx5000.log

with only epson2 in dll.config

[sanei_debug] Setting debug level of epson2 to 255.
[epson2] sane_epson2_init: sane-backends 1.0.19
[epson2] sane_epson2_init: reading config file, epson2.conf
[epson2]  scsi EPSON
[epson2]  usb
[epson2] attach_one_usb: dev =
[epson2] SANE Epson 2 Backend v0.1.16 - 2007-12-30
[epson2] attach: devname = , type = 3
[epson2] attach: opening , type = 3
[epson2] attach_one_usb: dev = libusb:001:002
[epson2] SANE Epson 2 Backend v0.1.16 - 2007-12-30
[epson2] attach: devname = libusb:001:002, type = 3
[epson2] attach: opening libusb:001:002, type = 3
[epson2] found valid EPSON scanner: 0x4b8/0x82b (vendorID/productID)
[epson2] e2_set_model: model is 'generic'
[epson2] esci_reset
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC @
[epson2] buf[0] 1b .
[epson2] buf[1] 40 @
[epson2] e2_send: cmd count, r = 0, w = 1
[epson2] e2_recv: size = 1, buf = 0xbfeb614b
[epson2] e2_recv: cmd count, r = 1, w = 1
[epson2] buf[0] 06 .
[epson2] e2_discover_capabilities
[epson2] esci_request_identity
[epson2] e2_cmd_info_block, params len = 2, reply len = 0, buf = 0xbfeb6368
[epson2] e2_send: size = 2, reply = 0
[epson2] e2_send: ESC I
[epson2] buf[0] 1b .
[epson2] buf[1] 49 I
[epson2] e2_send: cmd count, r = 1, w = 2
[epson2] e2_recv: size = 4, buf = 0xbfeb60e2
[epson2] e2_recv: cmd count, r = 2, w = 2
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 13 .
[epson2] buf[3] 00 .
[epson2] e2_recv_info_block: payload length: 19
[epson2] e2_recv: size = 19, buf = 0x8091ef0
[epson2] e2_recv: cmd count, r = 3, w = 2
[epson2] buf[0] 44 D
[epson2] buf[1] 37 7
[epson2] buf[2] 52 R
[epson2] buf[3] 64 d
[epson2] buf[4] 00 .
[epson2] buf[5] 52 R
[epson2] buf[6] 2c ,
[epson2] buf[7] 01 .
[epson2] buf[8] 52 R
[epson2] buf[9] 58 X
[epson2] buf[10] 02 .
[epson2] buf[11] 52 R
[epson2] buf[12] b0 .
[epson2] buf[13] 04 .
[epson2] buf[14] 41 A
[epson2] buf[15] d8 .
[epson2] buf[16] 27 '
[epson2] buf[17] d8 .
[epson2] buf[18] 36 6
[epson2] e2_set_cmd_level: D7
[epson2] e2_add_resolution: add (dpi): 100
[epson2] e2_add_resolution: add (dpi): 300
[epson2] e2_add_resolution: add (dpi): 600
[epson2] e2_add_resolution: add (dpi): 1200
[epson2] maximum scan area: 10200x14040
[epson2] e2_set_fbf_area: 0.000000,0.000000 215.899994,297.179993 1200 [mm]
[epson2] esci_request_status
[epson2] e2_send: size = 2, reply = 4
[epson2] e2_send: ESC F
[epson2] buf[0] 1b .
[epson2] buf[1] 46 F
[epson2] e2_send: cmd count, r = 3, w = 3
[epson2] e2_recv: size = 4, buf = 0xbfeb6132
[epson2] e2_recv: cmd count, r = 4, w = 3
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 00 .
[epson2] buf[3] 00 .
[epson2] status: 02
[epson2]  ready
[epson2]  no option equipment installed
[epson2]  support extended commands
[epson2] esci_request_extended_identity
[epson2]  net autodiscovery
[epson2] attach_one_net: dev = autodiscovery
[epson2] SANE Epson 2 Backend v0.1.16 - 2007-12-30
[epson2] attach: devname = autodiscovery, type = 4
[epson2] attach: opening autodiscovery, type = 4
[epson2] e2_network_discovery, sent discovery packet
[epson2] e2_network_discovery, end
[epson2] sane_epson2_get_devices

tj




More information about the sane-devel mailing list