[sane-devel] dell aio 926

Yves Jeanrenaud yves.jeanrenaud at gmail.com
Mon Aug 16 19:38:10 UTC 2010


usbsnoop is not supporting vista, unfortunately, as the dell drivers
do not work on xp.
so I used hhdsoftware USB port monitor, would this be any helpfull?

regards,

yves

2010/8/16 m. allan noah <kitno455 at gmail.com>:
> http://www.pcausa.com/Utilities/UsbSnoop/
>
> then you can simplify the output with some scripts, mine is attached.
>
> allan
>
> On Mon, Aug 16, 2010 at 12:06 PM, Yves Jeanrenaud
> <yves.jeanrenaud at gmail.com> wrote:
>> I tried to figure out some more info but I'm actually stuck.
>> You advised me to log the trafix scanning on windows. How may I do this?
>>
>> regards
>>
>> Yves
>>
>> 2010/7/24 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
>>> another update. I downloaded and compiled the backend:
>>> new sane-find-scanner -v -v:
>>>
>>> This is sane-find-scanner from sane-backends 1.0.21
>>>
>>>  # sane-find-scanner will now attempt to detect your scanner. If the
>>>  # result is different from what you expected, first make sure your
>>>  # scanner is powered up and properly connected to your computer.
>>>
>>> searching for SCSI scanners:
>>> checking /dev/scanner... failed to open (Invalid argument)
>>> checking /dev/sg0... failed to open (Invalid argument)
>>> checking /dev/sg1... failed to open (Invalid argument)
>>> checking /dev/sg2... failed to open (Invalid argument)
>>> checking /dev/sg3... failed to open (Invalid argument)
>>> checking /dev/sg4... failed to open (Invalid argument)
>>> checking /dev/sg5... failed to open (Invalid argument)
>>> checking /dev/sg6... failed to open (Invalid argument)
>>> checking /dev/sg7... failed to open (Invalid argument)
>>> checking /dev/sg8... failed to open (Invalid argument)
>>> checking /dev/sg9... failed to open (Invalid argument)
>>> checking /dev/sga... failed to open (Invalid argument)
>>> checking /dev/sgb... failed to open (Invalid argument)
>>> checking /dev/sgc... failed to open (Invalid argument)
>>> checking /dev/sgd... failed to open (Invalid argument)
>>> checking /dev/sge... failed to open (Invalid argument)
>>> checking /dev/sgf... failed to open (Invalid argument)
>>> checking /dev/sgg... failed to open (Invalid argument)
>>> checking /dev/sgh... failed to open (Invalid argument)
>>> checking /dev/sgi... failed to open (Invalid argument)
>>> checking /dev/sgj... failed to open (Invalid argument)
>>> checking /dev/sgk... failed to open (Invalid argument)
>>> checking /dev/sgl... failed to open (Invalid argument)
>>> checking /dev/sgm... failed to open (Invalid argument)
>>> checking /dev/sgn... failed to open (Invalid argument)
>>> checking /dev/sgo... failed to open (Invalid argument)
>>> checking /dev/sgp... failed to open (Invalid argument)
>>> checking /dev/sgq... failed to open (Invalid argument)
>>> checking /dev/sgr... failed to open (Invalid argument)
>>> checking /dev/sgs... failed to open (Invalid argument)
>>> checking /dev/sgt... failed to open (Invalid argument)
>>> checking /dev/sgu... failed to open (Invalid argument)
>>> checking /dev/sgv... failed to open (Invalid argument)
>>> checking /dev/sgw... failed to open (Invalid argument)
>>> checking /dev/sgx... failed to open (Invalid argument)
>>> checking /dev/sgy... failed to open (Invalid argument)
>>> checking /dev/sgz... failed to open (Invalid argument)
>>>  # No SCSI scanners found. If you expected something different, make sure that
>>>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>  # Also you need support for SCSI Generic (sg) in your operating system.
>>>  # If using Linux, try "modprobe sg".
>>>
>>> searching for USB scanners:
>>> checking /dev/usb/scanner... failed to open (Invalid argument)
>>> checking /dev/usb/scanner0... failed to open (Invalid argument)
>>> checking /dev/usb/scanner1... failed to open (Invalid argument)
>>> checking /dev/usb/scanner2... failed to open (Invalid argument)
>>> checking /dev/usb/scanner3... failed to open (Invalid argument)
>>> checking /dev/usb/scanner4... failed to open (Invalid argument)
>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>> checking /dev/usb/scanner7... failed to open (Invalid argument)
>>> checking /dev/usb/scanner8... failed to open (Invalid argument)
>>> checking /dev/usb/scanner9... failed to open (Invalid argument)
>>> checking /dev/usb/scanner10... failed to open (Invalid argument)
>>> checking /dev/usb/scanner11... failed to open (Invalid argument)
>>> checking /dev/usb/scanner12... failed to open (Invalid argument)
>>> checking /dev/usb/scanner13... failed to open (Invalid argument)
>>> checking /dev/usb/scanner14... failed to open (Invalid argument)
>>> checking /dev/usb/scanner15... failed to open (Invalid argument)
>>> checking /dev/usbscanner... failed to open (Invalid argument)
>>> checking /dev/usbscanner0... failed to open (Invalid argument)
>>> checking /dev/usbscanner1... failed to open (Invalid argument)
>>> checking /dev/usbscanner2... failed to open (Invalid argument)
>>> checking /dev/usbscanner3... failed to open (Invalid argument)
>>> checking /dev/usbscanner4... failed to open (Invalid argument)
>>> checking /dev/usbscanner5... failed to open (Invalid argument)
>>> checking /dev/usbscanner6... failed to open (Invalid argument)
>>> checking /dev/usbscanner7... failed to open (Invalid argument)
>>> checking /dev/usbscanner8... failed to open (Invalid argument)
>>> checking /dev/usbscanner9... failed to open (Invalid argument)
>>> checking /dev/usbscanner10... failed to open (Invalid argument)
>>> checking /dev/usbscanner11... failed to open (Invalid argument)
>>> checking /dev/usbscanner12... failed to open (Invalid argument)
>>> checking /dev/usbscanner13... failed to open (Invalid argument)
>>> checking /dev/usbscanner14... failed to open (Invalid argument)
>>> checking /dev/usbscanner15... failed to open (Invalid argument)
>>> trying libusb:
>>>
>>> <device descriptor of 0x04b8/0x0005 at 002:005 (EPSON USB Printer)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                1.10
>>> bDeviceClass          0
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x04B8
>>> idProduct             0x0005
>>> bcdDevice             1.00
>>> iManufacturer         1 (EPSON)
>>> iProduct              2 (USB Printer)
>>> iSerialNumber         3 (08P010209120904030)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         32
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         192 (Self-powered)
>>>  MaxPower             2 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      2
>>>   bInterfaceClass    7
>>>   bInterfaceSubClass 1
>>>   bInterfaceProtocol 2
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x01 (out 0x01)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 1>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x82 (in 0x02)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <device descriptor of 0x413c/0x5115 at 002:004 (Language Error Language Error)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                2.00
>>> bDeviceClass          0
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x413C
>>> idProduct             0x5115
>>> bcdDevice             0.01
>>> iManufacturer         1 (Language Error)
>>> iProduct              2 (Language Error)
>>> iSerialNumber         3 (Language Error)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         117
>>>  bNumInterfaces       4
>>>  bConfigurationValue  1
>>>  iConfiguration       8 (Language Error)
>>>  bmAttributes         192 (Self-powered)
>>>  MaxPower             16 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      4
>>>   bInterfaceClass    255
>>>   bInterfaceSubClass 255
>>>   bInterfaceProtocol 255
>>>   iInterface         4 (Language Error)
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x86 (in 0x06)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 1>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x06 (out 0x06)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 2>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x87 (in 0x07)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 3>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x07 (out 0x07)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>  <interface 1>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   1
>>>   bAlternateSetting  0
>>>   bNumEndpoints      2
>>>   bInterfaceClass    7
>>>   bInterfaceSubClass 1
>>>   bInterfaceProtocol 2
>>>   iInterface         5 (Language Error)
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x81 (in 0x01)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 1>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x01 (out 0x01)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>  <interface 2>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   2
>>>   bAlternateSetting  0
>>>   bNumEndpoints      1
>>>   bInterfaceClass    3
>>>   bInterfaceSubClass 0
>>>   bInterfaceProtocol 0
>>>   iInterface         6 (Language Error)
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x83 (in 0x03)
>>>    bmAttributes      3 (interrupt)
>>>    wMaxPacketSize    8
>>>    bInterval         100 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>  <interface 3>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   3
>>>   bAlternateSetting  0
>>>   bNumEndpoints      2
>>>   bInterfaceClass    8
>>>   bInterfaceSubClass 6
>>>   bInterfaceProtocol 80
>>>   iInterface         7 (Language Error)
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x88 (in 0x08)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 1>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x08 (out 0x08)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    64
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <trying to find out which USB chip is used>
>>>    checking for GT-6801 ...
>>>    this is not a GT-6801 (bDeviceClass = 0)
>>>    checking for GT-6816 ...
>>>    this is not a GT-6816 (bcdUSB = 0x200)
>>>    checking for GT-8911 ...
>>>    this is not a GT-8911 (check 2, bcdUSB = 0x200)
>>>    checking for MA-1017 ...
>>>    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for MA-1015 ...
>>>    this is not a MA-1015 (bDeviceClass = 0)
>>>    checking for MA-1509 ...
>>>    this is not a MA-1509 (bDeviceClass = 0)
>>>    checking for LM983[1,2,3] ...
>>>    this is not a LM983x (bcdUSB = 0x200)
>>>    checking for GL646 ...
>>>    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for GL646_HP ...
>>>    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for GL660+GL646 ...
>>>    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for GL84x ...
>>>    this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for ICM532B ...
>>>    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>>>    checking for PV8630/LM9830 ...
>>>    this is not a PV8630/LM9830 (bcdUSB = 0x200)
>>>    checking for M011 ...
>>>    this is not a M011 (bDeviceClass = 0)
>>>    checking for RTS8822 ...
>>>    this is not a RTS8822 (bNumEndpoints = 4)
>>>    checking for rts8858c ...
>>>    this is not a rts8858c (bcdUSB = 0x200)
>>>    checking for SQ113 ...
>>>    this is not a SQ113 (bNumEndpoints = 4)
>>>    checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ...
>>>    this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass = 0)
>>>    checking for rts8801/rts8891 ...
>>>    this is not a rts8801/rts8891 (bcdUSB = 0x200)
>>> <Couldn't determine the type of the USB chip (result from sane-backends 1.0.21)>
>>>
>>> found USB scanner (vendor=0x413c [Language Error], product=0x5115
>>> [Language Error]) at libusb:002:004
>>>
>>> <device descriptor of 0x05e3/0x0605 at 002:002 (USB2.0 Hub)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                2.00
>>> bDeviceClass          9
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x05E3
>>> idProduct             0x0605
>>> bcdDevice             6.011
>>> iManufacturer         0 ()
>>> iProduct              1 (USB2.0 Hub)
>>> iSerialNumber         0 ()
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         25
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>  MaxPower             100 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      1
>>>   bInterfaceClass    9
>>>   bInterfaceSubClass 0
>>>   bInterfaceProtocol 0
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x81 (in 0x01)
>>>    bmAttributes      3 (interrupt)
>>>    wMaxPacketSize    1
>>>    bInterval         255 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.26-2-ixp4xx
>>> ohci_hcd OHCI Host Controller)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                1.10
>>> bDeviceClass          9
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x1D6B
>>> idProduct             0x0001
>>> bcdDevice             2.06
>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>> iProduct              2 (OHCI Host Controller)
>>> iSerialNumber         1 (0000:00:01.0)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         25
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>  MaxPower             0 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      1
>>>   bInterfaceClass    9
>>>   bInterfaceSubClass 0
>>>   bInterfaceProtocol 0
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x81 (in 0x01)
>>>    bmAttributes      3 (interrupt)
>>>    wMaxPacketSize    2
>>>    bInterval         255 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.26-2-ixp4xx
>>> ohci_hcd OHCI Host Controller)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                1.10
>>> bDeviceClass          9
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x1D6B
>>> idProduct             0x0001
>>> bcdDevice             2.06
>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>> iProduct              2 (OHCI Host Controller)
>>> iSerialNumber         1 (0000:00:01.1)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         25
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>  MaxPower             0 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      1
>>>   bInterfaceClass    9
>>>   bInterfaceSubClass 0
>>>   bInterfaceProtocol 0
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x81 (in 0x01)
>>>    bmAttributes      3 (interrupt)
>>>    wMaxPacketSize    2
>>>    bInterval         255 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <device descriptor of 0x05ac/0x1203 at 001:006 (Apple iPod)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                2.00
>>> bDeviceClass          0
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x05AC
>>> idProduct             0x1203
>>> bcdDevice             0.01
>>> iManufacturer         1 (Apple)
>>> iProduct              2 (iPod)
>>> iSerialNumber         3 (0000004AFC2D)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         32
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         192 (Self-powered)
>>>  MaxPower             500 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      2
>>>   bInterfaceClass    8
>>>   bInterfaceSubClass 6
>>>   bInterfaceProtocol 80
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x82 (in 0x02)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    512
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>    <endpoint 1>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x01 (out 0x01)
>>>    bmAttributes      2 (bulk)
>>>    wMaxPacketSize    512
>>>    bInterval         0 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>
>>> <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.26-2-ixp4xx
>>> ehci_hcd EHCI Host Controller)>
>>> bLength               18
>>> bDescriptorType       1
>>> bcdUSB                2.00
>>> bDeviceClass          9
>>> bDeviceSubClass       0
>>> bDeviceProtocol       0
>>> bMaxPacketSize0       64
>>> idVendor              0x1D6B
>>> idProduct             0x0002
>>> bcdDevice             2.06
>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ehci_hcd)
>>> iProduct              2 (EHCI Host Controller)
>>> iSerialNumber         1 (0000:00:01.2)
>>> bNumConfigurations    1
>>>  <configuration 0>
>>>  bLength              9
>>>  bDescriptorType      2
>>>  wTotalLength         25
>>>  bNumInterfaces       1
>>>  bConfigurationValue  1
>>>  iConfiguration       0 ()
>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>  MaxPower             0 mA
>>>  <interface 0>
>>>   <altsetting 0>
>>>   bLength            9
>>>   bDescriptorType    4
>>>   bInterfaceNumber   0
>>>   bAlternateSetting  0
>>>   bNumEndpoints      1
>>>   bInterfaceClass    9
>>>   bInterfaceSubClass 0
>>>   bInterfaceProtocol 0
>>>   iInterface         0 ()
>>>    <endpoint 0>
>>>    bLength           7
>>>    bDescriptorType   5
>>>    bEndpointAddress  0x81 (in 0x01)
>>>    bmAttributes      3 (interrupt)
>>>    wMaxPacketSize    4
>>>    bInterval         12 ms
>>>    bRefresh          0
>>>    bSynchAddress     0
>>>  # Your USB scanner was (probably) detected. It may or may not be supported by
>>>  # SANE. Try scanimage -L and read the backend's manpage.
>>>
>>>  # Not checking for parallel port scanners.
>>>
>>>  # Most Scanners connected to the parallel port or other proprietary ports
>>>  # can't be detected by this program.
>>> done
>>>
>>>
>>> 2010/7/22 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
>>>> I will upgrade the backend. Wonder why my debian repositroy supplied
>>>> such an old package.
>>>> I would make you a log of the scanner, if you advise me how to.
>>>> yes it is a strongARM device with debian lenny on it.
>>>>
>>>> yves
>>>>
>>>>
>>>> 2010/7/22 m. allan noah <kitno455 at gmail.com>:
>>>>> Some points/questions-
>>>>>
>>>>> 1. This version of sane-backends is ancient, I recommend an upgrade.
>>>>> 2. It appears that this scanner (and it's Lexmark version) is not
>>>>> currently supported
>>>>> 3. Perhaps you can get a log of this machine scanning under windows?
>>>>> Stef might be able to determine if it compatible with lexmark backend.
>>>>> 4. Is this a StrongARM system?
>>>>>
>>>>> allan
>>>>>
>>>>> On Thu, Jul 22, 2010 at 2:38 AM, Yves Jeanrenaud
>>>>> <yves.jeanrenaud at gmail.com> wrote:
>>>>>> Oh I see. sorry for beeing so naive.
>>>>>> here is the output:
>>>>>> ----
>>>>>> This is sane-find-scanner from sane-backends 1.0.19
>>>>>>
>>>>>>  # sane-find-scanner will now attempt to detect your scanner. If the
>>>>>>  # result is different from what you expected, first make sure your
>>>>>>  # scanner is powered up and properly connected to your computer.
>>>>>>
>>>>>> searching for SCSI scanners:
>>>>>> checking /dev/scanner... failed to open (Invalid argument)
>>>>>> checking /dev/sg0... failed to open (Invalid argument)
>>>>>> checking /dev/sg1... failed to open (Invalid argument)
>>>>>> checking /dev/sg2... failed to open (Invalid argument)
>>>>>> checking /dev/sg3... failed to open (Invalid argument)
>>>>>> checking /dev/sg4... failed to open (Invalid argument)
>>>>>> checking /dev/sg5... failed to open (Invalid argument)
>>>>>> checking /dev/sg6... failed to open (Invalid argument)
>>>>>> checking /dev/sg7... failed to open (Invalid argument)
>>>>>> checking /dev/sg8... failed to open (Invalid argument)
>>>>>> checking /dev/sg9... failed to open (Invalid argument)
>>>>>> checking /dev/sga... failed to open (Invalid argument)
>>>>>> checking /dev/sgb... failed to open (Invalid argument)
>>>>>> checking /dev/sgc... failed to open (Invalid argument)
>>>>>> checking /dev/sgd... failed to open (Invalid argument)
>>>>>> checking /dev/sge... failed to open (Invalid argument)
>>>>>> checking /dev/sgf... failed to open (Invalid argument)
>>>>>> checking /dev/sgg... failed to open (Invalid argument)
>>>>>> checking /dev/sgh... failed to open (Invalid argument)
>>>>>> checking /dev/sgi... failed to open (Invalid argument)
>>>>>> checking /dev/sgj... failed to open (Invalid argument)
>>>>>> checking /dev/sgk... failed to open (Invalid argument)
>>>>>> checking /dev/sgl... failed to open (Invalid argument)
>>>>>> checking /dev/sgm... failed to open (Invalid argument)
>>>>>> checking /dev/sgn... failed to open (Invalid argument)
>>>>>> checking /dev/sgo... failed to open (Invalid argument)
>>>>>> checking /dev/sgp... failed to open (Invalid argument)
>>>>>> checking /dev/sgq... failed to open (Invalid argument)
>>>>>> checking /dev/sgr... failed to open (Invalid argument)
>>>>>> checking /dev/sgs... failed to open (Invalid argument)
>>>>>> checking /dev/sgt... failed to open (Invalid argument)
>>>>>> checking /dev/sgu... failed to open (Invalid argument)
>>>>>> checking /dev/sgv... failed to open (Invalid argument)
>>>>>> checking /dev/sgw... failed to open (Invalid argument)
>>>>>> checking /dev/sgx... failed to open (Invalid argument)
>>>>>> checking /dev/sgy... failed to open (Invalid argument)
>>>>>> checking /dev/sgz... failed to open (Invalid argument)
>>>>>>  # No SCSI scanners found. If you expected something different, make sure that
>>>>>>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>>>>  # Also you need support for SCSI Generic (sg) in your operating system.
>>>>>>  # If using Linux, try "modprobe sg".
>>>>>>
>>>>>> searching for USB scanners:
>>>>>> checking /dev/usb/scanner... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner0... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner1... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner2... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner3... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner4... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner7... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner8... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner9... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner10... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner11... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner12... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner13... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner14... failed to open (Invalid argument)
>>>>>> checking /dev/usb/scanner15... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner0... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner1... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner2... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner3... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner4... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner5... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner6... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner7... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner8... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner9... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner10... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner11... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner12... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner13... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner14... failed to open (Invalid argument)
>>>>>> checking /dev/usbscanner15... failed to open (Invalid argument)
>>>>>> trying libusb:
>>>>>>
>>>>>> <device descriptor of 0x413c/0x5115 at 002:004 (Language Error Language Error)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                2.00
>>>>>> bDeviceClass          0
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x413C
>>>>>> idProduct             0x5115
>>>>>> bcdDevice             0.01
>>>>>> iManufacturer         1 (Language Error)
>>>>>> iProduct              2 (Language Error)
>>>>>> iSerialNumber         3 (Language Error)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         117
>>>>>>  bNumInterfaces       4
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       8 (Language Error)
>>>>>>  bmAttributes         192 (Self-powered)
>>>>>>  MaxPower             16 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      4
>>>>>>   bInterfaceClass    255
>>>>>>   bInterfaceSubClass 255
>>>>>>   bInterfaceProtocol 255
>>>>>>   iInterface         4 (Language Error)
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x86 (in 0x06)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 1>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x06 (out 0x06)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 2>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x87 (in 0x07)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 3>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x07 (out 0x07)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>  <interface 1>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   1
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      2
>>>>>>   bInterfaceClass    7
>>>>>>   bInterfaceSubClass 1
>>>>>>   bInterfaceProtocol 2
>>>>>>   iInterface         5 (Language Error)
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x81 (in 0x01)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 1>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x01 (out 0x01)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>  <interface 2>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   2
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      1
>>>>>>   bInterfaceClass    3
>>>>>>   bInterfaceSubClass 0
>>>>>>   bInterfaceProtocol 0
>>>>>>   iInterface         6 (Language Error)
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x83 (in 0x03)
>>>>>>    bmAttributes      3 (interrupt)
>>>>>>    wMaxPacketSize    8
>>>>>>    bInterval         100 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>  <interface 3>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   3
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      2
>>>>>>   bInterfaceClass    8
>>>>>>   bInterfaceSubClass 6
>>>>>>   bInterfaceProtocol 80
>>>>>>   iInterface         7 (Language Error)
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x88 (in 0x08)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 1>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x08 (out 0x08)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <trying to find out which USB chip is used>
>>>>>>    checking for GT-6801 ...
>>>>>>    this is not a GT-6801 (bDeviceClass = 0)
>>>>>>    checking for GT-6816 ...
>>>>>>    this is not a GT-6816 (bcdUSB = 0x200)
>>>>>>    checking for GT-8911 ...
>>>>>>    this is not a GT-8911 (check 2, bcdUSB = 0x200)
>>>>>>    checking for MA-1017 ...
>>>>>>    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for MA-1015 ...
>>>>>>    this is not a MA-1015 (bDeviceClass = 0)
>>>>>>    checking for MA-1509 ...
>>>>>>    this is not a MA-1509 (bDeviceClass = 0)
>>>>>>    checking for LM983[1,2,3] ...
>>>>>>    this is not a LM983x (bcdUSB = 0x200)
>>>>>>    checking for GL646 ...
>>>>>>    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for GL646_HP ...
>>>>>>    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for GL660+GL646 ...
>>>>>>    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for GL84x ...
>>>>>>    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for ICM532B ...
>>>>>>    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>>>>>>    checking for PV8630/LM9830 ...
>>>>>>    this is not a PV8630/LM9830 (bcdUSB = 0x200)
>>>>>>    checking for M011 ...
>>>>>>    this is not a M011 (bDeviceClass = 0)
>>>>>>    checking for RTS8822 ...
>>>>>>    this is not a RTS8822 (bNumEndpoints = 4)
>>>>>>    checking for rts8858c ...
>>>>>>    this is not a rts8858c (bcdUSB = 0x200)
>>>>>>    checking for SQ113 ...
>>>>>>    this is not a SQ113 (bNumEndpoints = 4)
>>>>>>    checking for HP5550/5590/7650 chipset ...
>>>>>>    this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>>>>>>    checking for rts8801/rts8891 ...
>>>>>>    this is not a rts8801/rts8891 (bcdUSB = 0x200)
>>>>>> <Couldn't determine the type of the USB chip (result from sane-backends 1.0.19)>
>>>>>>
>>>>>> found USB scanner (vendor=0x413c [Language Error], product=0x5115
>>>>>> [Language Error]) at libusb:002:004
>>>>>>
>>>>>> <device descriptor of 0x04b8/0x0005 at 002:003 (EPSON USB Printer)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                1.10
>>>>>> bDeviceClass          0
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x04B8
>>>>>> idProduct             0x0005
>>>>>> bcdDevice             1.00
>>>>>> iManufacturer         1 (EPSON)
>>>>>> iProduct              2 (USB Printer)
>>>>>> iSerialNumber         3 (08P010209120904030)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         32
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         192 (Self-powered)
>>>>>>  MaxPower             2 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      2
>>>>>>   bInterfaceClass    7
>>>>>>   bInterfaceSubClass 1
>>>>>>   bInterfaceProtocol 2
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x01 (out 0x01)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 1>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x82 (in 0x02)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    64
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <device descriptor of 0x05e3/0x0605 at 002:002 (USB2.0 Hub)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                2.00
>>>>>> bDeviceClass          9
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x05E3
>>>>>> idProduct             0x0605
>>>>>> bcdDevice             6.011
>>>>>> iManufacturer         0 ()
>>>>>> iProduct              1 (USB2.0 Hub)
>>>>>> iSerialNumber         0 ()
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         25
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>>>>  MaxPower             100 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      1
>>>>>>   bInterfaceClass    9
>>>>>>   bInterfaceSubClass 0
>>>>>>   bInterfaceProtocol 0
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x81 (in 0x01)
>>>>>>    bmAttributes      3 (interrupt)
>>>>>>    wMaxPacketSize    1
>>>>>>    bInterval         255 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.26-2-ixp4xx
>>>>>> ohci_hcd OHCI Host Controller)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                1.10
>>>>>> bDeviceClass          9
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x1D6B
>>>>>> idProduct             0x0001
>>>>>> bcdDevice             2.06
>>>>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>>>>> iProduct              2 (OHCI Host Controller)
>>>>>> iSerialNumber         1 (0000:00:01.0)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         25
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>>>>  MaxPower             0 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      1
>>>>>>   bInterfaceClass    9
>>>>>>   bInterfaceSubClass 0
>>>>>>   bInterfaceProtocol 0
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x81 (in 0x01)
>>>>>>    bmAttributes      3 (interrupt)
>>>>>>    wMaxPacketSize    2
>>>>>>    bInterval         255 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.26-2-ixp4xx
>>>>>> ohci_hcd OHCI Host Controller)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                1.10
>>>>>> bDeviceClass          9
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x1D6B
>>>>>> idProduct             0x0001
>>>>>> bcdDevice             2.06
>>>>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>>>>> iProduct              2 (OHCI Host Controller)
>>>>>> iSerialNumber         1 (0000:00:01.1)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         25
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>>>>  MaxPower             0 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      1
>>>>>>   bInterfaceClass    9
>>>>>>   bInterfaceSubClass 0
>>>>>>   bInterfaceProtocol 0
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x81 (in 0x01)
>>>>>>    bmAttributes      3 (interrupt)
>>>>>>    wMaxPacketSize    2
>>>>>>    bInterval         255 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <device descriptor of 0x05ac/0x1203 at 001:006 (Apple iPod)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                2.00
>>>>>> bDeviceClass          0
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x05AC
>>>>>> idProduct             0x1203
>>>>>> bcdDevice             0.01
>>>>>> iManufacturer         1 (Apple)
>>>>>> iProduct              2 (iPod)
>>>>>> iSerialNumber         3 (0000004AFC2D)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         32
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         192 (Self-powered)
>>>>>>  MaxPower             500 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      2
>>>>>>   bInterfaceClass    8
>>>>>>   bInterfaceSubClass 6
>>>>>>   bInterfaceProtocol 80
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x82 (in 0x02)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    512
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>    <endpoint 1>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x01 (out 0x01)
>>>>>>    bmAttributes      2 (bulk)
>>>>>>    wMaxPacketSize    512
>>>>>>    bInterval         0 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>
>>>>>> <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.26-2-ixp4xx
>>>>>> ehci_hcd EHCI Host Controller)>
>>>>>> bLength               18
>>>>>> bDescriptorType       1
>>>>>> bcdUSB                2.00
>>>>>> bDeviceClass          9
>>>>>> bDeviceSubClass       0
>>>>>> bDeviceProtocol       0
>>>>>> bMaxPacketSize0       64
>>>>>> idVendor              0x1D6B
>>>>>> idProduct             0x0002
>>>>>> bcdDevice             2.06
>>>>>> iManufacturer         3 (Linux 2.6.26-2-ixp4xx ehci_hcd)
>>>>>> iProduct              2 (EHCI Host Controller)
>>>>>> iSerialNumber         1 (0000:00:01.2)
>>>>>> bNumConfigurations    1
>>>>>>  <configuration 0>
>>>>>>  bLength              9
>>>>>>  bDescriptorType      2
>>>>>>  wTotalLength         25
>>>>>>  bNumInterfaces       1
>>>>>>  bConfigurationValue  1
>>>>>>  iConfiguration       0 ()
>>>>>>  bmAttributes         224 (Self-poweredRemote Wakeup)
>>>>>>  MaxPower             0 mA
>>>>>>  <interface 0>
>>>>>>   <altsetting 0>
>>>>>>   bLength            9
>>>>>>   bDescriptorType    4
>>>>>>   bInterfaceNumber   0
>>>>>>   bAlternateSetting  0
>>>>>>   bNumEndpoints      1
>>>>>>   bInterfaceClass    9
>>>>>>   bInterfaceSubClass 0
>>>>>>   bInterfaceProtocol 0
>>>>>>   iInterface         0 ()
>>>>>>    <endpoint 0>
>>>>>>    bLength           7
>>>>>>    bDescriptorType   5
>>>>>>    bEndpointAddress  0x81 (in 0x01)
>>>>>>    bmAttributes      3 (interrupt)
>>>>>>    wMaxPacketSize    4
>>>>>>    bInterval         12 ms
>>>>>>    bRefresh          0
>>>>>>    bSynchAddress     0
>>>>>>  # Your USB scanner was (probably) detected. It may or may not be supported by
>>>>>>  # SANE. Try scanimage -L and read the backend's manpage.
>>>>>>
>>>>>>  # Not checking for parallel port scanners.
>>>>>>
>>>>>>  # Most Scanners connected to the parallel port or other proprietary ports
>>>>>>  # can't be detected by this program.
>>>>>> done
>>>>>> --------------
>>>>>> regards
>>>>>>
>>>>>> yves
>>>>>>
>>>>>>
>>>>>> 2010/7/21 m. allan noah <kitno455 at gmail.com>:
>>>>>>> Just because the device is made by Lexmark does not mean it will be
>>>>>>> supported by the lexmark sane backend. What does
>>>>>>>
>>>>>>> sane-find-scanner -v -v
>>>>>>>
>>>>>>> report?
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Wed, Jul 21, 2010 at 3:53 PM, Yves Jeanrenaud
>>>>>>> <yves.jeanrenaud at gmail.com> wrote:
>>>>>>>> just some update. I fixed the usb issue. one hub was broken. dang it.
>>>>>>>> anyway, sane-find-scanner now puts out:
>>>>>>>> found USB scanner (vendor=0x413c [Language Error], product=0x5115
>>>>>>>> [Language Error]) at libusb:002:022
>>>>>>>> and sanimage -L putts out
>>>>>>>>
>>>>>>>> No scanners were identified. If you were expecting something different,
>>>>>>>> check that the scanner is plugged in, turned on and detected by the
>>>>>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>>>>>> which came with this software (README, FAQ, manpages).
>>>>>>>>
>>>>>>>> yves
>>>>>>>>
>>>>>>>> 2010/7/21 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
>>>>>>>>> thanks. I tried to enable the lexmark backend, but I guess the device
>>>>>>>>> poses a more basic problem to me:
>>>>>>>>> it does not show up in lsusb or proc/bus/usb/devices at all. and
>>>>>>>>> sane-find-scanner does not see it.
>>>>>>>>> what could I do?
>>>>>>>>>
>>>>>>>>> yves
>>>>>>>>>
>>>>>>>>> 2010/7/18 m. allan noah <kitno455 at gmail.com>:
>>>>>>>>>> It is almost certainly a lexmark product, something like the X3650 maybe?
>>>>>>>>>>
>>>>>>>>>> allan
>>>>>>>>>>
>>>>>>>>>> On Sat, Jul 17, 2010 at 9:56 AM, Yves Jeanrenaud
>>>>>>>>>> <yves.jeanrenaud at gmail.com> wrote:
>>>>>>>>>>> my hp 3300c just broke and I was wondering if there is any way to get
>>>>>>>>>>> the scanner of the dell all-in-one 926 to work with sane?
>>>>>>>>>>> best regards
>>>>>>>>>>>
>>>>>>>>>>> yves
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>>>>             to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>             to sane-devel-request at lists.alioth.debian.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> "The truth is an offense, but not a sin"
>>>>>
>>>>
>>>
>>
>
>
>
> --
> "The truth is an offense, but not a sin"
>



More information about the sane-devel mailing list