[sane-devel] trying Canon DR-5060-F
Christophe Largeau (liste)
liste at alixen.fr
Wed Dec 29 16:04:40 UTC 2010
Thank you.
Note that I'll be away until next monday.
Christophe.
Le 29/12/2010 17:00, m. allan noah a écrit :
> Thanks. I'll look at it tonight.
>
> allan
>
> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
> <liste at alixen.fr> wrote:
>> the trace.wsl file taken from the snifer is attached to this message.
>>
>> Christophe.
>>
>>
>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>
>>> the sniffer utility:
>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>
>>> We need to use that to capture traffic of a low-resolution black and white
>>> scan.
>>>
>>> I cannot give more specific instructions, because I rarely use this
>>> program.
>>>
>>> allan
>>>
>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>> <liste at alixen.fr> wrote:
>>>>
>>>> I will replug the scsi card into the orignal windows machine. Do you have
>>>> instruction for the log capture on windows ?
>>>>
>>>> Christophe.
>>>>
>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>
>>>>> hmm- it is mad about something we ask it to do in the set window
>>>>> command. I don't have a protocol manual for this machine, so we have
>>>>> to guess what the problem is. Or, we have to try and capture a log
>>>>> from Windows driver. Can you use this machine on windows?
>>>>>
>>>>> allan
>>>>>
>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>> <liste at alixen.fr> wrote:
>>>>>>
>>>>>> the new dr.log is attached to this message.
>>>>>>
>>>>>> Christophe.
>>>>>>
>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>
>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>
>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 2>dr.log>dr.pnm
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan noah<kitno455 at gmail.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>
>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>> API
>>>>>>>>> library for scanners
>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>> API
>>>>>>>>> library for scanners -- utilities
>>>>>>>>>
>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner. If the
>>>>>>>>> # result is different from what you expected, first make sure your
>>>>>>>>> # scanner is powered up and properly connected to your computer.
>>>>>>>>>
>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>> # Your SCSI scanner was detected. It may or may not be supported by
>>>>>>>>> SANE.
>>>>>>>>> Try
>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>
>>>>>>>>> # No USB scanners found. If you expected something different, make
>>>>>>>>> sure
>>>>>>>>> that
>>>>>>>>> # you have loaded a kernel driver for your USB host controller and
>>>>>>>>> have
>>>>>>>>> setup
>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>
>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>
>>>>>>>>> # Most Scanners connected to the parallel port or other proprietary
>>>>>>>>> ports
>>>>>>>>> # can't be detected by this program.
>>>>>>>>>
>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>> recognized
>>>>>>>>>
>>>>>>>>> thanks to this message :
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html ,
>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>
>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la and
>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>
>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>
>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from sane-backends
>>>>>>>>> 1.0.21
>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, attaching
>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>> (2097152/524288)
>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>> ......
>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>> ....0.
>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>> [canon_dr] in:<<
>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 20
>>>>>>>>> ........CANON
>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 20
>>>>>>>>> DR-5060F
>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 20
>>>>>>>>> 011020010607
>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version 0110
>>>>>>>>> at
>>>>>>>>> /dev/sg2
>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>> ......
>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>> [canon_dr] in:<<
>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 c8
>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>> .d............
>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>> [canon_dr] standard options
>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>> ......
>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>
>>>>>>>>> Any idea ?
>>>>>>>>>
>>>>>>>>> Christophe.
>>>>>>>>> --
>>>>>>>>> Christophe Largeau
>>>>>>>>> Alixen
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Christophe Largeau
>>>>>> Alixen
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Christophe Largeau
>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>
>>>
>>>
>>>
>>
>>
>> --
>> Christophe Largeau
>> Alixen 20 rue Jean Rostand 91 400 Orsay
>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>
>
>
>
--
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
More information about the sane-devel
mailing list