[sane-devel] sane-umax1220u fails with Umax 2000U

[Albrecht Beck]

Hi,

I'm trying to get the Umax 2000U running with Ubuntu 9.10. Unfortunately
it doesn't work:

albrecht at calculus:~$ lsusb
Bus 005 Device 002: ID 1606:0030 Umax [hex] Astra 2000U
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

albrecht at calculus:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x1606, product=0x0030, chip=PV8630/LM9830) at
libusb:005:002
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once
you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

albrecht at calculus:~$ SANE_DEBUG_UMAX1220U=128 scanimage -L

[sanei_debug] Setting debug level of umax1220u to 128.
[umax1220u] sane_init: version_code != 0, authorize != 0
[umax1220u] sane_init: SANE umax1220u backend version 1.0.2 from
sane-backends 1.0.20
[umax1220u] reading configure file umax1220u.conf
[umax1220u] attach_matching_devices(usb 0x1606 0x0010)
[umax1220u] attach_matching_devices(usb 0x1606 0x0030)
[umax1220u] attach_scanner: libusb:005:002
[umax1220u] attach_scanner: opening libusb:005:002
[umax1220u] UMAX_open_device: `libusb:005:002'
[umax1220u] UMAX_open_device: Scanner is a 2000U. Expect color
problems :)
[umax1220u] csend: cmd = 0
[umax1220u] usync: len = 0, cmd = 0
[umax1220u] Failure on line of umax1220u-common.c: 394
[umax1220u] UMAX_close_device:
[umax1220u] Failure on line of umax1220u-common.c: 2359
[umax1220u] ERROR: attach_scanner: opening libusb:005:002 failed
[umax1220u] attach_matching_devices(usb 0x1606 0x0130)
[umax1220u] attach_matching_devices(/dev/scanner)
[umax1220u] attach_scanner: /dev/scanner
[umax1220u] attach_scanner: opening /dev/scanner
[umax1220u] UMAX_open_device: `/dev/scanner'
[umax1220u] UMAX_open_device: couldn't open device `/dev/scanner':
Invalid argument
[umax1220u] ERROR: attach_scanner: opening /dev/scanner failed
[umax1220u] attach_matching_devices(/dev/usb/scanner0)
[umax1220u] attach_scanner: /dev/usb/scanner0
[umax1220u] attach_scanner: opening /dev/usb/scanner0
[umax1220u] UMAX_open_device: `/dev/usb/scanner0'
[umax1220u] UMAX_open_device: couldn't open device `/dev/usb/scanner0':
Invalid argument
[umax1220u] ERROR: attach_scanner: opening /dev/usb/scanner0 failed
[umax1220u] finished reading configure file
[umax1220u] sane_get_devices(local_only = 0)
[umax1220u] sane_exit



Can anybody help?

Regards,
Albrecht