[sane-devel] sane-umax1220u fails with Umax 2000U

[m. allan noah]

did you try it as root, just in case it is a permissions issue?

allan

On Thu, Jan 7, 2010 at 4:17 AM, Albrecht Beck <albrecht.beck at arcor.de> wrote:
> Hi,
>
> I'm trying to get the Umax 2000U running with Ubuntu 9.10. Unfortunately
> it doesn't work:
>
> albrecht at calculus:~$ lsusb
> Bus 005 Device 002: ID 1606:0030 Umax [hex] Astra 2000U
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> albrecht at calculus:~$ sane-find-scanner
>
>  # sane-find-scanner will now attempt to detect your scanner. If the
>  # result is different from what you expected, first make sure your
>  # scanner is powered up and properly connected to your computer.
>
>  # No SCSI scanners found. If you expected something different, make
> sure that
>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x1606, product=0x0030, chip=PV8630/LM9830) at
> libusb:005:002
>  # Your USB scanner was (probably) detected. It may or may not be
> supported by
>  # SANE. Try scanimage -L and read the backend's manpage.
>
>  # Not checking for parallel port scanners.
>
>  # Most Scanners connected to the parallel port or other proprietary
> ports
>  # can't be detected by this program.
>
>  # You may want to run this program as root to find all devices. Once
> you
>  # found the scanner devices, be sure to adjust access permissions as
>  # necessary.
>
> albrecht at calculus:~$ SANE_DEBUG_UMAX1220U=128 scanimage -L
>
> [sanei_debug] Setting debug level of umax1220u to 128.
> [umax1220u] sane_init: version_code != 0, authorize != 0
> [umax1220u] sane_init: SANE umax1220u backend version 1.0.2 from
> sane-backends 1.0.20
> [umax1220u] reading configure file umax1220u.conf
> [umax1220u] attach_matching_devices(usb 0x1606 0x0010)
> [umax1220u] attach_matching_devices(usb 0x1606 0x0030)
> [umax1220u] attach_scanner: libusb:005:002
> [umax1220u] attach_scanner: opening libusb:005:002
> [umax1220u] UMAX_open_device: `libusb:005:002'
> [umax1220u] UMAX_open_device: Scanner is a 2000U. Expect color
> problems :)
> [umax1220u] csend: cmd = 0
> [umax1220u] usync: len = 0, cmd = 0
> [umax1220u] Failure on line of umax1220u-common.c: 394
> [umax1220u] UMAX_close_device:
> [umax1220u] Failure on line of umax1220u-common.c: 2359
> [umax1220u] ERROR: attach_scanner: opening libusb:005:002 failed
> [umax1220u] attach_matching_devices(usb 0x1606 0x0130)
> [umax1220u] attach_matching_devices(/dev/scanner)
> [umax1220u] attach_scanner: /dev/scanner
> [umax1220u] attach_scanner: opening /dev/scanner
> [umax1220u] UMAX_open_device: `/dev/scanner'
> [umax1220u] UMAX_open_device: couldn't open device `/dev/scanner':
> Invalid argument
> [umax1220u] ERROR: attach_scanner: opening /dev/scanner failed
> [umax1220u] attach_matching_devices(/dev/usb/scanner0)
> [umax1220u] attach_scanner: /dev/usb/scanner0
> [umax1220u] attach_scanner: opening /dev/usb/scanner0
> [umax1220u] UMAX_open_device: `/dev/usb/scanner0'
> [umax1220u] UMAX_open_device: couldn't open device `/dev/usb/scanner0':
> Invalid argument
> [umax1220u] ERROR: attach_scanner: opening /dev/usb/scanner0 failed
> [umax1220u] finished reading configure file
> [umax1220u] sane_get_devices(local_only = 0)
> [umax1220u] sane_exit
>
>
>
> Can anybody help?
>
> Regards,
> Albrecht
>
>
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"