[sane-devel] Xerox Travel Scanner 100 could not be detected

[Andrey Loginov]

Done.
But I cannot attach picture. It exeeds 100K mail list quota.
У сб, 2010-01-09 у 17:24 -0800, Jack McGill пише:
> Andrey,
> Do the following:
>     $export SANE_DEBUG_GENESYS=255
>     $export SANE_DEBUG_GENESYS_GL841=255
>     $scanimage -d genesys --resolution 100 --mode Color >xeroxTS100-100dpi-
> scan.pnm 2> xeroxTS100.log
> 
> attach the image and log to an email back to the list.
> 
> Hopefully, Stef will be able to look at these and have some suggestions.
> 
> Jack McGill
> 
> 
> --- On Sat, 1/9/10, Andrey Loginov <avloginov at gmail.com> wrote:
> 
> > From: Andrey Loginov <avloginov at gmail.com>
> > Subject: Re: [sane-devel] Xerox Travel Scanner 100 could not be detected
> > To: "Jack McGill" <jmcgill85258 at yahoo.com>
> > Cc: sane-devel at lists.alioth.debian.org
> > Date: Saturday, January 9, 2010, 5:08 PM
> > Also I did some traces with
> > strace(output is in attachment):
> > strace -o strace.out -f scanimage -T
> > Hope it can help.
> > У нд, 2010-01-10 у 01:10 +0200, Andrey Loginov
> > пише:
> > > У сб, 2010-01-09 у 08:19 -0800, Jack McGill
> > пише:
> > > > --- On Fri, 1/8/10, Andrey Loginov <avloginov at gmail.com>
> > wrote:
> > > > 
> > > > > I am trying to make Xerox Travel Scanner 100
> > portable
> > > > > scanner under
> > > > > Ubunto 9.10(karmic).
> > > > > When I use sane-find-scanner -v -v, it
> > shows:
> > > > > 
> > > > > <device descriptor of 0x04a7/0x04ac at
> > 001:003 (Xerox
> > > > > Travel Scanner
> > > > > 100)>
> > > > .
> > > > 
> > > > That scanner is probably a clone of the Visioneer
> > RoadWarrior, which
> > > is supported.
> > > > 
> > > > If you are up to the challenge, support could
> > probably added.
> > > > 
> > > > 1. You will need to download the latest source
> > code.
> > > > 2. Add a few lines of code.
> > > > 3. Recompile the source code.
> > > > 
> > > > This article explains how to download and install
> > from source:
> > > http://mp610.blogspot.com/2008/04/give-your-scanner-new-freshly-sane.html
> > 
> > > > 
> > > > So as a quick summary:
> > > > 1. $sudo apt-get install git
> > > > 2. $sudo apt-get install libsane-dev  (the
> > article says libusb-dev,
> > > but I think that is wrong).
> > > > 3. $cd ~
> > > > 4. $git clone
> > git://git.debian.org/sane/sane-backends.git
> > > > 5. $gksu gedit
> > ~/sane-backends/backends/genesys.conf.in
> > > > 6. Change the usb product id of the Roadwarrior
> > from 0x0494 to 0x04ac
> > > > 7. Save and exit
> > > > 8. $gksu gedit
> > ~/sane-backends/backends/genesys_devices.c
> > > > 9. At the very bottom section change the usb
> > product id of the
> > > roadwarrior from 0x0494 to 0x04ac
> > > > 10. Save and exit.
> > > > 11. $ ./configure --prefix=/usr --sysconfdir=/etc
> > --localstatedir=/var
> > > > 12. $make
> > > > 13. sudo make install
> > > > 14. $sane-find-scanner
> > > > 15. $sudo scanimage -L
> > > > 16. $scanimage -L
> > > > 17. $scanimage -T
> > > > 18. Open xsane and try to scan something
> > > > 19. Report back to us on how it works.
> > > > 20. If it doesn't recognize the scanner open
> > /etc/sane.d/genesys.conf
> > > and see if your change made it to this file. If not,
> > edit the
> > > roadwarrior usb pid here too.
> > > > 
> > > I did everything you recommended and have some
> > progress.
> > > found USB scanner (vendor=0x04a7 [Xerox],
> > product=0x04ac [Travel Scanner
> > > 100], chip=GL842) at libusb:001:008
> > > 
> > > scanimage -L
> > > device `v4l:/dev/video0' is a Noname CKF7037 virtual
> > device
> > > device `genesys:libusb:001:009' is a Visioneer
> > Readwarrior flatbed
> > > scanner
> > > But scanimage -T shows error:
> > > scanimage: sane_start: Invalid argument
> > > xsane stars and detects scanner and I could even scan
> > 1 page more or
> > > less correctly(colors and quality is awful) but i
> > couldn't scan another
> > > page it was not shown.
> > > What can I do more to correct all these problems and
> > make this device
> > > fully functional ?
> > > > If everything works with this dirty hack, then
> > Stef or Pierre can do a
> > > more formal update to the backend.
> > > > 
> > > > Good luck.
> > > > Jack McGill
> > > > 
> > > 
> > > 
> > 
> > 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: xeroxTS100.log.tgz
Type: application/x-compressed-tar
Size: 10846 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100110/61b5b8e8/attachment.bin>