[sane-devel] Xerox Travel Scanner 100 could not be detected

[stef]

Le lundi 11 janvier 2010 12:35:55 Andrey Loginov, vous avez écrit :
> How could I calibrade scanner using sane?
> 
> 2010/1/10 stef <stef.dev at free.fr>
> 
> > Le dimanche 10 janvier 2010 07:26:10 Andrey Loginov, vous avez écrit :
> > > Done.
> > > But I cannot attach picture. It exeeds 100K mail list quota.
> > >
> > > У сб, 2010-01-09 у 17:24 -0800, Jack McGill пише:
> > > > Andrey,
> > > > Do the following:
> > > >     $export SANE_DEBUG_GENESYS=255
> > > >     $export SANE_DEBUG_GENESYS_GL841=255
> > > >     $scanimage -d genesys --resolution 100 --mode Color
> > > >
> > > > >xeroxTS100-100dpi- scan.pnm 2> xeroxTS100.log
> > > >
> > > > attach the image and log to an email back to the list.
> > > >
> > > > Hopefully, Stef will be able to look at these and have some
> >
> > suggestions.
> >
> > > > Jack McGill
> >
> >         Hello,
> >
> >        I see no errors in the appended logs. Would mind send directly to
> > me the
> > 'scan.pnm' file ? Did you calibrated the scanner before doing your test ?
> > Quality isn't that good unless you do it.
> >        If calibration doesn't help, I'd be inclined to try to hijack the
> > Pentax DS
> > mobile 600 device entry in genesys_devices. They externally look really
> > similar.
> >
> > Regards,
> >         Stef
> 
	Hello,

	to calibrate you need the calibration sheet that was sold with the scanner. 
Insert it and then do a 'scanimage -d genesys --calibrate' . The scanner will 
go through the calibration process and will store the result in a file. So 
next scans will be calibrated.

Regards,
	Stef