[sane-devel] Uniscan D50 scanner cannot work

[陈钢]

Thanks for your attention.
I will try the latest backend and report the results.




在2010-05-20 09:18:14，"Gernot Hassenpflug" <aikishugyo at gmail.com> 写道：
>2010/5/20 陈钢 <bzongbzongbzong at 163.com>:
>> Hi,
>>     I have an old Uniscan D50 USB scanner, which was
>> produced by a Chinese company, Qinghua Ziguang.
>> I tried in Fedora 8/11/12, but it didn't work. Some useful
>> information, I think, is that when adding a line
>> usb 0x1606 0x0170
>
>You are running a very old sane-backends. Too bad it does not give any
>information about the chipset used. I suggest you try the latest
>sane-backends: 1.0.21. Maybe you will get more useful information from
>it because at latest sane I note that there are several models of the
>brand UMAX that have the 0x1606 vendor ID and are supported by a
>variety of backends depending on the chip used:
>
>- plustek
>- rts8891
>- umax1220u
>
>So please see what output you can get from the latest SANE.
>
>Best regards,
>Gernot Hassenpflug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100520/169ddb32/attachment.htm>