[sane-devel] canon dr-9050c doesn't work

[m. allan noah]

"/usr/local/etc/sane.d/dll.d"

you have two copies of sane installed, and the one in /usr/local is
being used, but it has no config files. I would remove that copy, and
re-configure with the proper arguments to overwrite your existing
copy. Something like:

./configure --prefix=/usr --sysconfdir=/etc
make
make install

allan

On Mon, Nov 22, 2010 at 2:30 AM, Luigi Carbone <lg.carbone at gmail.com> wrote:
> In /etc/sane.d/.dll.conf "canon_dr" is listed,
>
> The result of command SANE_DEBUG_DLL=255 scanimage -L 2>9050.log on terminal
> is
>
> sudo SANE_DEBUG_DLL=255 scanimage -L 2 > 9050.log
> [sanei_debug] Setting debug level of dll to 255.
> [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21
> [dll] sane_init/read_dlld: processing /usr/local/etc/sane.d/dll.d ...
> [dll] sane_init/read_dlld: done.
> [dll] sane_init/read_config: Couldn't open config file (dll.conf): No such
> file or directory
> [dll] sane_get_devices
> [dll] sane_get_devices: found 0 devices
> [dll] sane_exit: exiting
> [dll] sane_exit: finished
>
> but the 9050.log is attach.
>
> TKS
>
> Il 19/11/2010 14:26, m. allan noah ha scritto:
>>
>> The canon_dr backend is not enabled. check /etc/sane.d/dll.conf, and
>> make sure 'canon_dr' is listed there.
>>
>> If it is listed, then try this:
>>
>> SANE_DEBUG_DLL=255 scanimage -L 2>9050.log
>>
>> and send that log.
>>
>> allan
>>
>> On Fri, Nov 19, 2010 at 7:56 AM, Luigi Carbone<lg.carbone at gmail.com>
>>  wrote:
>>>
>>> Mmh, it's same.
>>>
>>> The log file is attach.
>>>
>>> Luigi
>>>
>>> Il 19/11/2010 13:33, m. allan noah ha scritto:
>>>>
>>>> Ok- as root, run this:
>>>>
>>>> SANE_DEBUG_CANON_DR=30 scanimage -L 2>9050.log
>>>>
>>>> then send 9050.log to the list.
>>>>
>>>> allan
>>>>
>>>> On Fri, Nov 19, 2010 at 2:03 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>>  wrote:
>>>>>
>>>>> With a privileges root, this is the result
>>>>>
>>>>> No scanners were identified. If you were expecting something different,
>>>>> check that the scanner is plugged in, turned on and detected by the
>>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>>> which came with this software (README, FAQ, manpages).
>>>>>
>>>>> :(
>>>>>
>>>>> Il 18/11/2010 14:20, m. allan noah ha scritto:
>>>>>>
>>>>>> as root, run the following command, and send output to us:
>>>>>>
>>>>>> scanimage -L
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Thu, Nov 18, 2010 at 7:57 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>>>>  wrote:
>>>>>>>
>>>>>>> Hi all,
>>>>>>> I have problem with scanner canon dr-9050C, i have ubuntu 10.04 and
>>>>>>> installated driver san version 1.0.21.
>>>>>>>
>>>>>>> I have configured file canon_dr.conf so
>>>>>>> # DR-9050C
>>>>>>> usb 0x1083 0x1622
>>>>>>>
>>>>>>> the command lsusb returns
>>>>>>>
>>>>>>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless
>>>>>>> Mouse+Keyboard
>>>>>>> Receiver
>>>>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>> Bus 001 Device 004: ID 152e:2507 LG (HLDS)
>>>>>>> Bus 001 Device 003: ID 1083:1622 Canon Electronics, Inc.
>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>>
>>>>>>> the scanner is visible to the system...
>>>>>>>
>>>>>>> Help me.
>>>>>>> --
>>>>>
>>>
>>>
>>
>>
>>
>
>
> --
> Luigi Carbone
> ----------------------
> Owner @ http://www.ingenioweb.it
> Web Designer @ www.consulenti-ict.it
> CV: http://www.linkedin.com/in/carboneluigi
> Skype: corsaro832
> Cell: 340 32 15 783
>



-- 
"The truth is an offense, but not a sin"