[sane-devel] ScanSnap s1100 testing

[m. allan noah]

I have written an updated version of the epjitsu backend, which will
drive the S1100, with proper calibration, more features, etc.
Unfortunately, this version breaks support for the other epjitsu
machines, and I have not had time to fix it. If you are prepared to
build from source, you can use the new version. See post #7 here:
http://ubuntuforums.org/showthread.php?t=1678335

allan

On Wed, Dec 21, 2011 at 2:32 PM, Carl Karsten <carl at personnelware.com> wrote:
> I have a ScanSnap S1100 which says "needs testers" and the usb id is blank:
>
> http://www.sane-project.org/cgi-bin/driver.pl?manu=fujitsu&model=scansnap&bus=any&v=&p=
>
> Bus 002 Device 003: ID 04c5:1200 Fujitsu, Ltd
>
> How do I go about testing?
>
> juser at trist:~$ scanimage -V
> scanimage (sane-backends) 1.0.22; backend version 1.0.22
>
> juser at trist:~$ sane-find-scanner
>
>  # sane-find-scanner will now attempt to detect your scanner. If the
>  # result is different from what you expected, first make sure your
>  # scanner is powered up and properly connected to your computer.
>
>  # No SCSI scanners found. If you expected something different, make sure that
>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04c5, product=0x1200) at libusb:002:003
>  # Your USB scanner was (probably) detected. It may or may not be supported by
>  # SANE. Try scanimage -L and read the backend's manpage.
>
>  # Not checking for parallel port scanners.
>
>  # Most Scanners connected to the parallel port or other proprietary ports
>  # can't be detected by this program.
>
>  # You may want to run this program as root to find all devices. Once you
>  # found the scanner devices, be sure to adjust access permissions as
>  # necessary.
> juser at trist:~$ scanimage -L
> WARNING: gnome-keyring:: no socket to connect to
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
>
> sudo lsusb -vv -s 3
>
> Bus 002 Device 003: ID 04c5:1200 Fujitsu, Ltd
> Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass          255 Vendor Specific Class
>  bDeviceSubClass       255 Vendor Specific Subclass
>  bDeviceProtocol       255 Vendor Specific Protocol
>  bMaxPacketSize0        64
>  idVendor           0x04c5 Fujitsu, Ltd
>  idProduct          0x1200
>  bcdDevice            1.00
>  iManufacturer           1 FUJITSU
>  iProduct                2 ScanSnap S1100
>  iSerial                 0
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           32
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xc0
>      Self Powered
>    MaxPower                2mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           2
>      bInterfaceClass       255 Vendor Specific Class
>      bInterfaceSubClass    255 Vendor Specific Subclass
>      bInterfaceProtocol    255 Vendor Specific Protocol
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval             255
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x02  EP 2 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval             255
> Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass          255 Vendor Specific Class
>  bDeviceSubClass       255 Vendor Specific Subclass
>  bDeviceProtocol       255 Vendor Specific Protocol
>  bMaxPacketSize0        64
>  bNumConfigurations      1
> Device Status:     0x0001
>  Self Powered
> juser at trist:~$
>
>
>
> --
> Carl K
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org



-- 
"The truth is an offense, but not a sin"